Q&A for How to Connect HDMI to TV

To make your TV compatible with HDMI, you will need an AV to HDMI converter which can be bought at a Walmart.

Check the TV for HDMI ports or look up the specifications on the manufacturer website or in the instruction book.

You might have to switch AV channels on your TV so the input on the TV display corresponds with the port you are plugging the HDMI cable into on the TV.

Soundbars only work when connected to an HDMI port marked as ARC (Audio Return Channel).

If your TV or app displays "turn off your recording device" when using HDMI, it might be due to HDCP copyright protection. Use an Apple-certified HDMI adapter since third-party ones can cause errors. Restart your iPad and TV, and reconnect them. Update your iPad's iOS and the app you're using. Try another app, as some enforce stricter content protection. If the HDMI cable is faulty, replace it. If the issue persists, contact the app’s support team for assistance, as it’s likely related to the app’s protection settings.

Ensure the composite cables are connected to the correct color-coded ports on the TV (yellow for video, red and white for audio). Set the TV to the correct input source, usually labeled "AV" or "Composite," and make sure the connected device is powered on and functioning. If the issue persists, try different cables or ports, as the existing ones might be faulty.

You need an active device called a "scan converter" or "HDMI to Composite" converter. Ensure that the device has the correct input and output jacks: HDMI for input and composite for output.

The Sony KD50X80J TV does not have an HDMI output for connecting to a recordable DVD player. It only has HDMI inputs for devices like gaming consoles, streaming devices, or Blu-ray players.

Use an HDMI cable to connect the HDMI output port on the decoder to an available HDMI input port on the TV. Turn on both devices, select the corresponding HDMI input on your TV, and follow the setup instructions on the decoder to activate your channels.

It's possible with an HDMI splitter or connector, but it might be a bit confusing to set up.

If HDMI is the only connection type on your TV, you'll need an upconverter to convert component signals to HDMI.

You have Windows set to extend your desktop to additional monitors. Change your monitor settings to "Duplicate these displays" or "Show only on 2."

The simplest way is to use Bluetooth or SharePlay, but if your TV doesn't support that, you can buy a Lightning to HDMI adapter.

There are several possible reasons: the cable might be broken, the TV or connected device could be faulty, the device might not be turned on, the TV might not be set to the correct input, the HDMI cable could be unidirectional, your device might be from a region with different color standards (PAL/NTSC), or the device could be set to an unsupported resolution.

If a device asks for a PIN, check the TV or connecting device screen, as it's often displayed during the process. If not, try default PINs like 0000, 1234, or 1111. Refer to the user manual for specific instructions, and if issues persist, restart both devices. For Bluetooth, "Forget" and re-pair the connection.

Yes, you can turn on a TV with an HDMI signal from a computer if the TV supports HDMI-CEC (Consumer Electronics Control) and this feature is enabled. HDMI-CEC allows connected devices to communicate and control each other through the HDMI connection. Enable HDMI-CEC in your TV settings, which may be called something specific to the brand, like Anynet+ for Samsung or Simplink for LG. Ensure the computer's HDMI output is active when sending a signal to the TV. If your TV doesn’t support HDMI-CEC, you’ll need to use the remote to turn it on.

Connect the HDMI cable to the HDMI port. If your TV is too old, it may not have an HDMI port and might instead have component cable ports or SCART ports.

Since you've replaced the cable and the problem persists, it is likely that the HDMI port on the TV is faulty.

To connect your iPad or iPhone to the USB port on the TV, simply plug your charging cable into the USB port on the TV. However, this will only charge your device.

You can use an iPad power cable port to HDMI adapter to connect it to your TV.

To set up your devices, connect the HDMI OUT from the cable box to an HDMI IN on the surround system. Then, connect the HDMI OUT (ARC/eARC) from the surround system to the HDMI ARC/eARC port on the TV. Select the HDMI input corresponding to the surround system on the TV. This setup allows the cable box to route through the surround system, sending video to the TV and handling audio.

To connect your laptop to your TV via HDMI, use an HDMI cable. If your TV doesn't support HDMI, you can use a USB to HDMI connector.

It depends on the type of TV you are using. The buttons might be on the bottom, back, or side of the TV. However, some TVs don't have any navigation buttons, so you might need a new remote.

You'll need a USB-C to HDMI cable for screen mirroring. For Samsung Galaxy S8/Note 8 and later models, connect a USB-C to HDMI adapter to your TV by plugging the USB-C male into the USB-C charging port on your device.

Yes, you can connect your phone to a TV using a custom HDMI cable, which can be purchased from retailers like Amazon or Walmart. This setup allows you to play videos from your phone on your TV.

It depends on which HDMI port you use. Check the back of the TV for labels indicating the ports. Plug the cable into HDMI1, turn on the TV, change the input/source to HDMI1, and turn on the DVD player to see your DVD.

First, check the batteries, as this is a common issue with remote controls. Then, ensure your remote is compatible with your TV, especially if it's a universal remote. Finally, try power cycling your remote and/or TV to resolve any communication glitches.

You should connect the red, yellow, and white cables to an RCA to HDMI adapter, and then plug an HDMI cable from the adapter to the TV.

No, an HDMI cable is not compatible with phones currently on the market. However, you can connect your phone to the TV using alternative methods like Bluetooth or screen sharing.

Use the TV's remote to navigate to the input source menu. Select the HDMI input where your device is connected, and note the input number displayed on the screen, such as HDMI 1 or HDMI 2. Confirm the selection, and you're all set to use your HDMI-connected device.