Download Article
Download Article
This is a walkthrough of wireless (IEEE 802.11 also known as WiFi) home networking with Puppy Linux using the graphical networking wizard.
Steps
If your router isn't new, then turn it on and skip to "Detecting your wireless adapter" (below). make sure to connect it to your computer.
-
Plug your router into your PC with an ethernet cable.Advertisement
-
Go to your browser and type in the address "http://192.168.0.1 192.168.0.1" or "http://192.168.2.1 192.168.2.1", or "http://192.168.1.1 192.168.1.1".
-
Enter your user name and password from your router (often "admin" and "admin") then your internet service provider.
-
Enable wireless and set your encryption (WPA as a minimum, WEP can be cracked in seconds) use AES encryption if you have it available, skip if you do not. and type a memorable passkey that is at least 64 characters. It's a hassle, but you only have type it a few times.
Advertisement
-
Click the "Connect" icon on your desktop .
-
In the "Connect" box, click "Connect to Internet by network interface".
- If under "Interfaces" (or "Driver Modules" if Puppy 2 series) a wireless device appears skip to "Connecting to a network" (below).
-
Click "Load module" , choose automatic and click OK, if this is successful skip to "Connecting to a network" (below).
- If your wireless adapter isn't found automatically, find the manufacturer and model, choose it from the list and click OK.
- If your wireless adapter isn't on the list, check WirelessWorking for a list of cards which may work with Puppy.
- If your wireless adapter isn't on the list, choose "ndiswrapper" from the list and choose your Microsoft Windows driver (.inf file) and click OK until you return to the Network setup screen.
-
Click "Save" .
Advertisement
-
Under "Interfaces", click on the newly detected wireless adapter.
-
Click on the "Wireless" button .
-
Click on "Scan" (this may take a number of attempts), choose your own network (find your manufacturer and model), then click OK.
-
Choose your "Encryption" by clicking on " WEP " or "WPA/skip, then enter your passkey where it says "Provide a key".
-
Click "Use This Profile".
-
Click "Auto DHCP" (or "Static IP" and enter the IP addresses manually if "Auto DHCP" doesn't work) then you are connected.
-
Click "Save" and this connection will be launched at every boot.
-
If everything works, and you can check by opening Google in a browser, then click Done .
Advertisement
Community Q&A
Search
-
QuestionMy WiFi uses WPA2 PSK. How do I connect Puppy Linux to that?MrPerfectCommunity AnswerType in the password that is on the back/bottom of your router, or whatever you may have changed it to.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about wireless networks, check out our in-depth interview with Blain Gunter .
References
About This Article
Thanks to all authors for creating a page that has been read 246,048 times.
Advertisement