Download Article
Download Article
Many people know about the Rubik's Cube, a.k.a. the 3x3x3. Some even know about the 2x2x2, the 4x4x4, etc. Few know about the cuboids—i.e. the 2x2x1, 3x2x1, 3x2x2, etc. This tutorial covers how to solve the 3x3x2 using CrazyBadCuber's approach, [1] X Research source and it assumes you know the position of the colors on your 3x3x2. It also assumes your 3x3x2 has 9 yellow stickers and 9 white stickers (and 6 stickers of each other color). If your color scheme is different, simply follow along, but replacing, for example, white with red and yellow with orange.
Steps
-
Become familiar with the notation used here. Each letter refers to a 90-degree clockwise movement of a face. Holding the cube directly in front of you, these rules apply:- If the letter is F , turn the layer facing you clockwise.
- If the letter is B , turn the layer opposite the layer facing you clockwise.
- If the letter is U , turn the layer furthest from the floor and parallel to the floor clockwise.
- If the letter is D , turn the layer closest to the floor and parallel to the floor clockwise.
- If the letter is L , turn the layer on your left clockwise.
- If the letter is R , turn the layer on your right clockwise.
-
Know that a tick mark represents a counterclockwise movement. For example, F' (read F prime ) represents a 90-degree counterclockwise movement of the layer facing you.Advertisement -
Know that a 2 represents a 180-degree movement. For example, U2 represents a 180-degree movement of the layer furthest from the floor. -
Know that a number before an algorithm in parentheses means repeat the algorithm that many times. E.g., 2(R2 U2 F2) is executed the same as R2 U2 F2 R2 U2 F2 .
Advertisement
-
Make the cross. For people who know how to do this on a 3x3x3, skip this step (although keep in mind that you cannot do any 90 degree turns except on the U and D layers). For everyone else, put the layer containing a white sticker at the bottom. Follow these steps:- 1. Find an edge piece (i.e. pieces neither on the corner nor in the center) on the bottom that contains white.
- 2. Adjust the top layer so that, directly above the edge piece containing white is a yellow piece
- 3. Make sure both pieces face toward you and the white center is still facing towards the ground.
- 4. Perform this move: F2
- 5. Repeat 1-4 until all white pieces are on the top
- 6. Insert each piece of your color scheme. Find where each color should go based on the colors around it, then adjust the U layer until both the spot where the color should be and the white piece with that color are facing you, then perform an F2 .
-
Insert the corners. This is relatively simple. One algorithm is used to swap a bottom corner and the corner above it, both on the front-right side: R2 U R2 U' R2 .- Keeping the white layer on the bottom, simply find where the white corner on the U layer should go, insert the corner and where it should go into the front-right side, and perform the algorithm.
- If no white corners are on the top but some corners on the bottom layer are still incorrect, simply use this algorithm on a white corner that is incorrect to remove it, and then you can insert it into the place it should go, removing another that you put back in its place, etc.
Advertisement
-
Solve the corners. Keeping the yellow layer on the top, try to find headlights (i.e. same color, same side corners), as denoted in the image. When you found the headlights, make sure they are placed in the L layer, then perform this algorithm: (R2 U) (R2 U') (R2 U' D) (R2 U') (R2 U) (R2 D') .- If there are no headlights to be found, simply perform this algorithm and headlights will appear.
-
Solve the edges. At this point, use these two algorithms until you have solved the cube.- 1. Switching the UF (front-facing upper) and UB (back-facing upper) edge, i.e. Opposite : 3(R2 U2) . Use this first; if any edge is the opposite of where it should be, use this. When there aren't any edges belonging in their opposite locations left ...
- 2. Switching the UF and UR (right-facing upper) edge, i.e. Adjacent : 2(R2 U) 2(R2 U2) (R2 U) (R2 U') R2 . Finding these should be relatively simple. Find any two adjacent sides which are perfect except for inverted top edges, and perform this algorithm. If the previous algorithm was used as described beforehand, this should only need to be done at most twice.
-
Celebrate! Now you can practice it to get good, show off to friends, solve it while you're waiting in line ... the possibilities are endless!
Advertisement
Expert Q&A
Search
-
QuestionHow do I easily solve this cube?Timothy Huynh is a Rubik’s Cube Artist & Champion based in Tampa, Florida. Timothy has been solving Rubik's Cubes professionally since 2016 and became a Guinness World Record Holder with advanced Rubik's cube-solving skills. Timothy has a follower base of over 8.6 million YouTube subscribers and 124k followers on Instagram. Internet celebrities including David Dobrik and Simu Liu have sung his praises, and Pixar has deemed his work "incredible."Begin by examining the faces and colors to understand the cube's current configuration. Identify the colors on each face and their positions relative to one another. Take note of any patterns or similarities across faces, as well as any specific pieces that may serve as reference points during solving. Once you have a clear understanding of the cube's layout, strategize on how to proceed based on this information. Determine which layers or sections to prioritize, such as solving one layer at a time or focusing on specific color combinations. Consider utilizing basic Rubik's cube solving techniques, such as layer-by-layer or block-building methods, adapted to the 3x3x2 cube's unique structure. Pay attention to how different moves and algorithms affect the cube's orientation and piece arrangement, and adjust your strategy accordingly. With a systematic approach and careful observation, you can effectively solve the 3x3x2 Rubik's cube and achieve a solved state.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Try learning the 3x3x4 next.Thanks
- Lubricate it with silicon-based cubing lubricant if you want it to turn better.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about rubik's cubes and puzzles, check out our in-depth interview with Timothy Huynh .
References
About This Article
Thanks to all authors for creating a page that has been read 100,848 times.
Reader Success Stories
- "Easy-to-follow directions! My 3x3x2 will always be a minute away from being solved!"
Advertisement
"Easy-to-follow directions! My 3x3x2 will always be a minute away from being solved!"
