PDF download Download Article
The best ways to slice through frozen meat without defrosting or thawing it
PDF download Download Article

Cutting meat while it’s still frozen allows you to thaw and cook smaller portions rather than using the whole cut. While it may be difficult to cut through completely frozen meat with a knife, softening it under running water can make it easier. If you want to cut the meat while it’s still frozen solid, you can use either an electric knife or a butcher’s saw to get the job done. Once your meat is cut, put the leftovers back in your freezer and cook the portion you have!

Things You Should Know

  • Use a heavy-duty knife with a serrated edge to make smooth cuts.
  • Saw through frozen meat with an electronic knife for a quick option.
  • Invest in a butcher saw if you need to cut through frozen meat often.
Method 1
Method 1 of 3:

Using a Regular Knife

PDF download Download Article
  1. 1
    Pick a heavy-duty knife with a serrated edge for smooth cuts. Choose a chef’s knife that feels heavy in your hand and has a serrated edge so you can easily cut through the meat. Make sure the knife is sharp so it doesn’t leave a jagged edge when you make your cut. If you don’t have a knife in your kitchen that will work, visit a kitchen specialty store and ask the employees for a knife that cuts through frozen meat.
    • Using a standard knife works best for thin cuts of boneless meat, such as chicken breasts, sausages, or tenderloins.
    • Alternatively, you can also chop the frozen meat with a butcher’s cleaver, but it can be more dangerous if the blade slips.
  2. 2
    Hold the meat underneath cold running water for 2-3 minutes to soften it. Knives will slip off the meat you’re trying to cut if it’s still frozen solid. Turn your faucet onto the coldest water you can and hold the meat underneath the stream. Rotate the meat while you hold it under the water until the outer edges are soft, which usually takes a few minutes.
    • You can leave the meat inside its packaging or you can remove it before you run it underwater.

    Warning: Don’t use hot water since it could start cooking the meat or make it susceptible to bacteria.

    Advertisement
  3. 3
    Hold the cut of meat firmly against a cutting board. Use a wooden cutting board when you cut meat so you don’t accidentally contaminate other surfaces. Put the cutting board on a flat surface and place your cut of meat on top. Use your non-dominant hand to hold the meat against the board so it doesn’t move around while you’re cutting it. [1]
    • Make sure your cutting board is large enough to hold your entire piece of meat or else you’ll need to sanitize the countertops after you make your cuts.
  4. 4
    Cut through the meat slowly with your knife. Set the cutting edge of the knife against the meat where you want to make your cut. Hold the meat with your non-dominant hand to keep it stable and prevent injuries. Start slowly sawing into the meat with the serrated edge, being careful not to let the knife slip. Apply a small amount of pressure onto the knife with your dominant hand so it cuts through the middle of the frozen meat. [2]
  5. Advertisement
Method 2
Method 2 of 3:

Using an Electric Knife

PDF download Download Article
  1. 1
    Plug in your electric knife and wrap the cord around your arm. Find a flat area of countertop that has an outlet nearby so you can use your knife. Plug the electric knife into the outlet and guide the cord so it’s on the same side of your body as your dominant hand. Loop the cord once around your arm so it doesn’t get in the way while you’re cutting the meat. [3]
    • Electric knives work best for boneless cuts of meat that are shorter than the length of the knife blade.
    • You can buy electric knives from the kitchen section in most department stores or online.
  2. 2
    Use the switch or trigger on the electric knife to start it. Set the serrated edge of the knife blade against the meat where you want to make your cut. Hold the meat in place with your non-dominant hand so your fingers are away from the blade. When you’re ready to start cutting, pull the trigger or press the button on the handle to start the blade. [4]
    • Keep your fingers away from the blade while the electric knife is running since it will easily cut you.

    Tip: Some electric knives have a safety button you also need to hold down with another finger in order to run it.

  3. 3
    Push the electric knife through the frozen meat. The blade on the electric knife quickly saws back and forth to make it easier to cut through your meat. Apply a small amount of pressure and push it down into the meat while the knife is running to cut through it. If your knife still has trouble cutting the meat, push and pull the knife back and forth to help guide it. [5]
    • Be careful when you first start cutting so the knife doesn’t slip toward your fingers.
    • Cutting through meat that’s frozen solid could damage or dull your knife blades.
  4. 4
    Rotate the piece of meat if your cut doesn’t go completely through it. When you get about halfway through the cut of meat, turn the piece on its side so your first cut faces toward you. Align your blade with the cut you already made and turn on the knife again to cut through the remaining meat. Apply a small amount of pressure to guide the blade down to finish your cut. [6]
    • If you have a thick piece of meat, you may have to rotate it multiple times to cut through it.
  5. Advertisement
Method 3
Method 3 of 3:

Using a Butcher Saw

PDF download Download Article
  1. 1
    Wear a safety glove on your non-dominant hand in case your saw slips. A safety glove is made of metal links and helps protect your hands from cuts. Put the safety glove on your non-dominant hand and use it to hold the meat firmly against a cutting board. Make sure you have a firm grip on the meat without putting any of your fingers over the area you plan on cutting. [7]
    • You can buy a safety glove from a kitchen specialty store or online.

    Tip: You don’t need to use a safety glove if you don’t want to, but you may be more likely to hurt yourself.

  2. 2
    Place the cutting edge of the saw on your meat where you want to cut. Hold the handle of the saw in your dominant hand with a firm grip. Set the teeth of the saw blade against your meat where you plan on cutting so you have a good starting point. Keep the blade of the saw pointing straight in front of you so you can easily cut into the meat. [8]
    • Butcher saws work well with larger cuts of frozen meats, like shoulders or ribs, and they can cut through bones.
    • You can buy a butcher saw online or from kitchen specialty stores.
  3. 3
    Push and pull the saw through the meat to cut through it. When you’re ready to start, apply firm downward pressure on the saw so it doesn’t slip while you’re cutting. Hold the meat still with your non-dominant hand, making sure your fingers are away from the saw. Keep pushing and pulling the saw blade through the meat until you cut completely through it. Try to maintain the same speed if throughout your cut so you don’t have any jagged edges. [9]
    • If it’s difficult to cut through the meat, try turning it on its side and continuing your cut.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • If you have access to one, you can also use a food-grade bandsaw to make your cuts.
      • Ask your butcher to cut the meat when you buy it so you don’t have to cut it later when it’s frozen.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Don’t thaw meat under hot water or on your countertop since it could start to develop harmful bacteria.
      • Be extremely careful when you cut frozen meat since your knife could easily slip and you may injure yourself.
      Advertisement

      Things You’ll Need

      Cutting with a Regular Knife

      • Knife with a serrated edge
      • Sink
      • Cutting board

      Slicing Meat with an Electric Knife

      • Electric knife
      • Cutting board

      Using a Butcher Saw

      • Safety glove
      • Butcher saw

      About This Article

      Thanks to all authors for creating a page that has been read 112,166 times.

      Did this article help you?

      Advertisement