Q&A for How to Connect HDMI to TV

To make your TV compatible with HDMI, you will need an AV to HDMI converter which can be bought at a Walmart.

Check the TV for HDMI ports or look up the specifications on the manufacturer website or in the instruction book.

You might have to switch AV channels on your TV so the input on the TV display corresponds with the port you are plugging the HDMI cable into on the TV.

There are several possible reasons: the cable might be broken, the TV or connected device could be faulty, the device might not be turned on, the TV might not be set to the correct input, the HDMI cable could be unidirectional, your device might be from a region with different color standards (PAL/NTSC), or the device could be set to an unsupported resolution.

Plug the other end of the HDMI cable into the HDMI port on your Firestick, typically located on the side or back of the device. Once connected, make sure your TV is set to the correct input source (usually labeled HDMI) to see the Firestick's signal. If there's still no signal, try using a different HDMI port on your TV or a different HDMI cable.

The simplest way is to use Bluetooth or SharePlay, but if your TV doesn't support that, you can buy a Lightning to HDMI adapter.

You have Windows set to extend your desktop to additional monitors. Change your monitor settings to "Duplicate these displays" or "Show only on 2."

If HDMI is the only connection type on your TV, you'll need an upconverter to convert component signals to HDMI.

It's possible with an HDMI splitter or connector, but it might be a bit confusing to set up.

Use an HDMI cable to connect the HDMI output port on the decoder to an available HDMI input port on the TV. Turn on both devices, select the corresponding HDMI input on your TV, and follow the setup instructions on the decoder to activate your channels.

Use your TV's remote control to navigate to the input/source selection menu, typically by pressing the "Input" or "Source" button. From there, select your desired HDMI port using the arrow keys and confirm with the OK or Enter button. If difficulties occur, refer to your TV's user manual for specific guidance.

You don't need an adapter. Just plug the USB-C end into your phone and the HDMI end into your TV to display your phone screen.

Restart your TV to see if the issue is resolved. If HDMI 4 still doesn't appear, check if it's enabled in the TV settings or see if there's a firmware update available for your TV model.

Make sure your HD decoder is set up correctly to display HD channels. Check the settings to confirm it's configured for HD display, and adjust the output resolution or activate HD channels in the decoder's settings menu if needed. If you continue to experience issues, contact your service provider for further assistance.

There might be a compatibility issue with your TV or settings on the decoder. Try using a different cable or input port on your TV. Also, check the settings on both the TV and the decoder to be sure they are configured for HD channels. If problems persist, contact your service provider for further assistance.

Make sure that both devices are set to output and display at 1080p HD. Check the settings on the soundbar and TV, and adjust the resolution. If the issue persists, try a different HDMI cable or port. Consult the user manuals for detailed instructions on resolution settings.

You can use an iPad power cable port to HDMI adapter to connect it to your TV.

You need an active device called a "scan converter" or "HDMI to Composite" converter. Ensure that the device has the correct input and output jacks: HDMI for input and composite for output.

ARC ports function like normal HDMI ports, so a regular HDMI cable will work. The only difference with an "ARC" HDMI port is that the TV can send audio out through it to a receiver or soundbar while receiving input from another device.

Insert a DVD into your player and press the Play button on your DVD player's remote control.

If your TV or app displays "turn off your recording device" when using HDMI, it might be due to HDCP copyright protection. Use an Apple-certified HDMI adapter since third-party ones can cause errors. Restart your iPad and TV, and reconnect them. Update your iPad's iOS and the app you're using. Try another app, as some enforce stricter content protection. If the HDMI cable is faulty, replace it. If the issue persists, contact the app’s support team for assistance, as it’s likely related to the app’s protection settings.

Yes, you can turn on a TV with an HDMI signal from a computer if the TV supports HDMI-CEC (Consumer Electronics Control) and this feature is enabled. HDMI-CEC allows connected devices to communicate and control each other through the HDMI connection. Enable HDMI-CEC in your TV settings, which may be called something specific to the brand, like Anynet+ for Samsung or Simplink for LG. Ensure the computer's HDMI output is active when sending a signal to the TV. If your TV doesn’t support HDMI-CEC, you’ll need to use the remote to turn it on.

If a device asks for a PIN, check the TV or connecting device screen, as it's often displayed during the process. If not, try default PINs like 0000, 1234, or 1111. Refer to the user manual for specific instructions, and if issues persist, restart both devices. For Bluetooth, "Forget" and re-pair the connection.

Yes. HDMI cables and compatible televisions are available and work in most countries and territories.

To make an HDMI input the default setting on your TV and bypass Google TV, open your TV's settings menu and look for options like input settings, power settings, or startup settings. Select the default input or startup input option and set it to the desired HDMI port. If your TV doesn’t allow this, try disabling Google TV's startup features or enabling the "Last Input" setting if available, which starts on the last-used input. Restart the TV to confirm the changes. If these options aren't available, you may need to switch the input manually each time.

Ensure the composite cables are connected to the correct color-coded ports on the TV (yellow for video, red and white for audio). Set the TV to the correct input source, usually labeled "AV" or "Composite," and make sure the connected device is powered on and functioning. If the issue persists, try different cables or ports, as the existing ones might be faulty.

Soundbars only work when connected to an HDMI port marked as ARC (Audio Return Channel).

Since you've replaced the cable and the problem persists, it is likely that the HDMI port on the TV is faulty.

To connect your iPad or iPhone to the USB port on the TV, simply plug your charging cable into the USB port on the TV. However, this will only charge your device.

You'll need a coaxial-to-HDMI converter. Connect the coaxial cable from your cable TV source to the converter, then connect an HDMI cable from the converter to your TV. Switch your TV to the correct HDMI input and adjust any settings as needed.