Q&A for How to Cut Wood Using Various Power Tools

Yes, a jigsaw or Sawzall (reciprocating saw). The teeth on the blades must be plenty and fine (the more teeth the better) in order to prevent breaking/ripping the plastic.

First, make sure that the side of the cabinet is thick enough to remove without ruining structural integrity. As for tools, I would use a combination of a plane and sandpaper (or electric planer and an orbital sander) to thin it down and smooth it.

Mark the different measurements on either end of the board, then clamp a straight edge on both marks. Use a circular saw along the edge for a straight cut.

Since mahogany is used mostly as a finishing wood, use a jigsaw or a circular saw, and be mindful to keep the side of the board that will face outwards down.

Buy and use an oscillating saw (multi tool) with a sharp timber-cutting blade. The blade should have fine teeth.

Use a finish blade, the more teeth the better. A combination blade will work, but it leaves a rough cut after a few cuts. The explanation of blades and what they work better with is usually explained on a new blade's packaging.

It depends on how small you need the wood pieces to be. For very small pieces, a fine tooth handsaw or hacksaw is recommended. Ensure you have backup pieces of wood, as very small pieces are more likely to snap and splinter off, if a clean finish is what you're after, you may need a few attempts before you get it right.

Depending on what wood shape you want, for shaping the outer edges you may use a jigsaw or even circular saw if the design isn't too complex. For shaping the flat sides of the timber, use a plane or sander, depending on how much wood needs to be removed.

Any circular saw or reciprocating saw (see steps 2 and 4) would be ideal for your job as all you want to do is simply cut the dresser in half. Just ensure you aren't cutting into any metal components, such as hinges, joiners, nails, or screws, and be sure to use safety glasses and ear plugs.

None. Never use any power tool to shave your beard or cut any hair. It is an extremely bad idea that is very likely to result in death or serious injury.