This wikiHow teaches you how to recover the photos and other data from a malfunctioning memory card. It will also teach you how to reformat the memory card for continued use if the memory card is repairable.

Method 1
Method 1 of 3:

Recovering Your Card's Data

  1. If your camera displays a message that says "Card Error", "Read Error", or something similar, turn off the camera and remove the memory card. Continuing to try to use the card after this point will reduce the likelihood of you recovering all of the data on the card. [1]
  2. While your card might be done for, there's still a possibility that your data is recoverable. Some of the most popular free data recovery programs include the following: [2]
    • Recuva - After you select your hard drive location (in this case, your SD card) and check the "Photos" option, Recuva does all the hard work in the background. Recommended for most users.
    • CardRecovery - After a brief setup, CardRecovery scans any attached SD cards. Once your evaluation period with CardRecovery is up, you'll need to pay to continue using its services.
    • Photo Rec - This program has a minimal interface and requires basic knowledge of how to navigate the Command Prompt program, so it isn't recommended for beginners.
    Advertisement
  3. Typically, this process will entail opening your recovery program's page, clicking the Download button, and double-clicking the downloaded setup file.
    • The location of the download button will vary from site to site. If you can't find it, try looking for it on the top or the side of the site's page.
  4. Most PCs have a thin, rectangular memory card slot with the word "SD" next to it. This will most likely be on the side of the computer's casing if it is a laptop, or somewhere on the CPU box if it is a desktop.
    • If your PC or Mac doesn't have an SD card slot, you can buy an SD card reader that plugs into your computer's USB port for less than $10.
    • You may have to allow your computer permission to use your SD card before you can access it.
  5. It should be installed in whichever location you chose earlier.
  6. You'll usually need to select the memory card as the location to scan and select the "Photos" option in your data recovery program's scan criteria before you can successfully scan your attached SD card.
    • After the scan completes, most programs will give you the option of restoring or exporting all salvageable photos to a location of your choice (e.g., your desktop).
    Advertisement
Method 2
Method 2 of 3:

Repairing a Memory Card on Windows

  1. You can usually do this using the long, thin memory card slot with the word "SD" next to it that's built into your computer. It will most likely be on the side of the computer's casing if it is a laptop, or somewhere on the CPU box if it is a desktop.
    • If your PC or Mac doesn't have an SD card slot, you can buy an SD card reader that plugs into your computer's USB port. These usually cost less than $10.
    • You may have to allow your computer permission to use your SD card before you can access it.
  2. It's in the bottom left corner of your screen.
  3. While the "My Computer" application is called "This PC" or "My PC" on Windows 8 and 10, typing "My Computer" will redirect your search to your computer's default version of My Computer.
  4. This will open the This PC window.
  5. This is on the bottom half of the "This PC" window. You should see a drive marked "OS (C:)" here (this is your primary hard drive) as well as any other connected drives, one of which is your memory card.
    • If you cannot tell which disk is your memory card, remove your card with this window open and note the drive that disappears. Remember to reinsert you card before continuing.
  6. The computer's default hard drive letter is "C", so your memory card will be a different letter.
  7. This will open the Windows quick-access menu over the Start button in the bottom left corner of your screen.
    • You can also right-click the Start button to open this menu.
  8. Doing so will open the Command Prompt program which will let you reformat your memory card.
    • If you aren't using your computer's administrator account, you won't be able to do this.
  9. . You'll need to replace "f:" with your memory card's drive letter (e.g., "e:"). The "chkdsk" function checks your selected disk for corruption and then reformats the areas in need of repair.
    • There is only one space between "f:" and "/r".
  10. This will initiate the disk checking process. If Command Prompt finds any repairable issues, it will fix them if possible.
    • If Command Prompt asks for permission to continue, press Enter to grant it permission.
    • You may get an error that says, "Cannot open volume for direct access" after hitting Enter . This error usually means that your disk either does not need formatting (e.g., it isn't damaged) or it is beyond repair.
    • In some cases, the "Cannot open volume for direct access" error is a result of your computer's antivirus preventing the formatting process. Try disabling your antivirus program while reformatting your drive to see if it fixes the issue.
  11. Once the process is complete, you can safely remove your SD card from your computer and place it back in your camera.
    Advertisement
Method 3
Method 3 of 3:

Repairing a Memory Card on Mac

  1. You may need to buy an SD card reader since not all Macs come with an SD card slot.
    • If your Mac does have an SD card slot, it will be on the side of the casing (laptop) or on the back of the CPU box (desktop). It may also be on the side of the keyboard on some desktop units.
    • Some devices require that you enable disk use via USB through its settings before your computer will recognize it.
  2. This is the blue face icon in your dock.
  3. It's in the toolbar at the top of the screen.
  4. This will open the Utilities folder, from which you can run the Disk Utility.
    • Alternatively, you can hold down ⇧ Shift and ⌘ Command and then tap U to open Utilities.
  5. This app resembles a grey hard drive with a stethoscope on top of it.
  6. It should be listed under the "External" section in the left-hand pane of the Disk Utility window.
    • If you don't see your memory card listed here, try removing and re-inserting the memory card.
  7. This is the stethoscope icon in the row of options at the top of the Disk Utility window. [3]
  8. If you see a pop-up window that says "Your disk is about to fail" instead, you won't be able to repair your memory card. [4]
  9. Once your Mac tells you the process is complete, you may safely remove your memory card and place it back in your camera.
    • You may see an error entitled "The underlying task reported failure" here. If so, try restarting your Mac and running the repair again.
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I format a memory card?
    Community Answer
    Begin by inserting your memory card into the computer. Next, locate your memory card and right click on it. When the menu pops up, click the word "format" and select "default." This should begin the formatting.
  • Question
    I can't copy any file to my micro SD card nor I can delete any file. When I insert it into my PC, it's not showing write protected but problem remains same and no copy, delete or format is possible. What can I do?
    Community Answer
    Many micro SD cards and adapters have a write-lock on the side, be sure this isn't enabled, even though your computer indicates it's not write-protected.
  • Question
    Can you please explain this answer? Many micro SD cards and adapters have a write-lock on the side, be sure this isn't enabled, even though your computer indicates it's not write-protected? Can you please tell me how to disable this write-lock?
    Community Answer
    That may be referring to a little sliding switch that is actually on the SD card itself. Look carefully on the card for it. It slides from a locked to an unlocked position.
See more answers
Ask a Question

      Advertisement

      Tips

      • You can avoid memory card corruption and errors by refraining from removing your card during saving or writing, avoiding saving when your device’s battery is low, and powering off your device before removing your card when possible.
      • Memory cards do not last forever. Flash memory has a lifespan of anywhere from 10 thousand to 10 million write and erase cycles, so it is recommended to keep backups and replace memory cards every few years, depending on how heavily the cards are used.
      • A new eight gigabyte SD card will usually run you less than $10.
      Advertisement

      Warnings

      • Even if your card is fixable, consider purchasing a new card instead of reformatting your old one. Formerly corrupted cards are far less reliable than a new SD card.
      Advertisement

      About this article

      Article Summary X

      To recover files from a corrupted memory card, install a data recovery program (e.g. Recuva, CardRecovery, or Photo Rec) on your computer, insert your memory card into the SD slot/reader, and then use the data recovery program to scan for salvageable files.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 822,915 times.
      If you buy through links on our site, we may earn a commission.

      Is this article up to date?

      Advertisement