How to Check for Leaks in GE and Hotpoint Washing Machines

PDF download Download Article
PDF download Download Article

Here is a list of parts to check if your GE & Hotpoint washer develop a water leak. Follow the instructions below to find where your GE or Hotpoint washing machine is leaking from. Often a visual inspection will tell you what is going on. The front panels of top loaders come off easily; there are two clips on top loaders that must be depressed to pop the panel off. A thin screwdriver or scraper will release these clips. Slide your tool along the seam between the top and front panels, the clips are 4–5 inches (10.2–12.7 cm) from the corners.

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Method 1
Method 1 of 8:

The Pump

PDF download Download Article
  1. will fall from the clothes you're washing and wind up inside of the pump. These objects can cause cracks in the pump body making the pump leak. [1]
    2. Advertisement
Method 2
Method 2 of 8:

The hoses that connect to the pump

PDF download Download Article
  1. Without the pressure from the clamps, the hoses will leak. Sometimes all you only need to do is to change the clamps to correct a leak. Fill hoses should be replaced every 5 years. [2]
Method 3
Method 3 of 8:

The Overflow Tube

PDF download Download Article
  1. If the washing machine fails to stop the incoming water when it reaches the selected level, water will leak through the overflow tube. This usually indicates a pressure switch problem, see below. [3]
  2. After overflow you may see what looks like plain water on your floor; suds will usually disappear after a few minutes. On front loaders in particular, use High Efficiency detergent to reduce sudsing.
    3. Advertisement
Method 4
Method 4 of 8:

The Transmission Seal

PDF download Download Article
  1. It costs too much to do a transmission seal replacement. [4]
    • Seals cost less than 20 dollars and take about 30 minutes to change.
Method 5
Method 5 of 8:

The Air Dome or Pressure Switch Hose

PDF download Download Article
  1. When this happens, the washer won't stop filling and this will cause a leak. [5]
    • Check operation of pressure switch. This switch tells the system that there is water in the tub and allows it to proceed to agitate. The switch itself is behind control panel but you can lightly blow into the hose leading up to it. Remove hose from side of tub and see if you can get the switch to flip by softly blowing into the hose. If power is on and timer is set to fill, it might begin to agitate at this point, so keep your hands away from the motor and pulley assembly. If it does try to agitate the switch is functional. It is best to check this while unplugged, then reassemble and try the unit.
    • Check the hose for blockage, especially where hose connects to tank, lint from clothes can clog this causing overfilling.
    2. Advertisement
Method 6
Method 6 of 8:

The Washer Holding Tank

PDF download Download Article
    3. Advertisement
Method 7
Method 7 of 8:

The Water Valve or Fill Hoses

PDF download Download Article
  1. If someone tries to move the washing machine by grabbing it by the water valve, this could cause the water valve to crack. [6]
    3. Advertisement
Method 8
Method 8 of 8:

The Holding Tank Top Seal

PDF download Download Article
  1. You will notice the water trickling down the holding tank. [7]

Community Q&A

Search
Add New Question
  • Question
    What if water drips when the machine is not in use?
    Community Answer
    Your supply lines might be faulty or your water pump needs replacing. It's cheap, quick, and easy to do yourself.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 12
  • Question
    If I have water leaking from under the washer when filling up, what might the issue be?
    Community Answer
    There could be a leakage underneath from a lot of pressure building up. You might want to get a plumber; he or she could give you some assistance with this.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 13
  • Question
    My washing machine smells like gas, could there be a gas leak?
    Community Answer
    Ordinary washing machines don't use gas. They are electric. Other appliances, like fridges, have a gas tank (freon or similar) to help the compression process, but washing machines don't. Is your machine connected to gas plant? If not, there is no gas source.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Make sure that you disconnect your washing machine from the wall outlet before attempting to do any repairs. Electricity is dangerous, but if you treat it with respect and follow the safety instructions, you will be OK.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Fix a Leaking Shower Head
      How to
      Fix a Leaky Washer
      How to
      Repair a Faucet That Leaks
      How to
      Clean the Inside of a Washing Machine
      How to
      Find Your Whirlpool Drain Pump Filter
      How to
      Replace a Washing Machine Door Seal
      How to
      Fix a U6 Error on your Samsung Washing Machine: Guide
      How to
      Fix a Washing Machine That Stops Mid‐Cycle
      How to
      Replace a Washing Machine Belt
      How to
      Troubleshoot & Repair a Washer That Doesn’t Drain
      How to
      Fix F5 E3 on a Whirlpool Washer
      How to
      Clean a Smelly Washing Machine
      What Does the F21 Error Code on a Whirlpool Washing Machine Mean?
      Proper Vent Drainage for a Laundry Machine: Sticking to Code
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=frEJhX9Sppw
      2. ↑ https://www.angi.com/articles/inspect-washing-machine-hoses.htm
      3. ↑ https://www.youtube.com/watch?v=PNUW-YuBz54
      4. ↑ https://www.youtube.com/watch?v=pdiYDj28O1E
      5. ↑ https://www.youtube.com/watch?v=NWrQVGyrFSQ
      6. ↑ https://www.youtube.com/watch?v=-661-1NbYZ4
      7. ↑ https://www.youtube.com/watch?v=KCFFQiakXg4
      8. http://www.do-it-yourself-washing-machine-and-dryer-repair-help.com/index.html

      About This Article

      Thanks to all authors for creating a page that has been read 128,616 times.

      Did this article help you?

      Advertisement