Download Article
Download Article
Driving a manual transmission truck can be intimidating at first, but will get easier as long as you practice the proper technique. Before you try to drive, you should get acclimated to the differences between an automatic and stick shift truck. Then, it’s just a matter of pressing the right pedals and driving in the proper gear. [1]
X
Expert Source
Ibrahim Onerli
Driving Instructor
Expert Interview. 18 November 2019.
Initially, driving might seem hard, but if you take your time and practice, you can be driving a stick shift truck in no time!
Steps
-
Find the clutch, gas, and brake pedals. The gas pedal is the skinny pedal on the right side. The brake pedal is the wider pedal that’s in the middle of the 2 other pedals. The clutch is the leftmost pedal in your truck. Each time you want to change the gear, you’ll have to press down on the clutch pedal. [2] X Expert Source Ibrahim Onerli
Driving Instructor Expert Interview. 18 November 2019. Using the clutch is typically the most challenging part of driving stick shift for most people. [3] X Research source- You should use your right foot to press the gas and brake pedals.
- Use your left foot to press down on the clutch.
-
Find your stick shift and look at the image on the top of it. The stick shift should be to the right of your seat (for trucks with left side steering wheels). Most stick shifts will have the gear numbers printed on top to help you locate them. [4] X Research source
- Typically first gear will be left and up, second gear will be left and down, third gear will be centered and up, fourth gear will be centered and down, fifth gear will be right and up, and reverse will be right and down.
- Pushing the stick shift into the center will put the truck in neutral.
Advertisement -
Adjust your seat and mirrors so you can see around you. Position your rearview and side mirrors so that you can see around your truck. Eliminate as many blind spots as you can to prevent crashing. Also, move your seat so that you feel comfortable reaching the pedals but can still see out of the front windshield.
- Remember to buckle your seatbelt before you start the truck.
-
Practice driving on flat ground. Manual trucks will roll whenever you put them in neutral if you don't have the brakes engaged. This makes practicing on a hilly road difficult. When you first start off, try to find flat ground to practice on.
Advertisement
-
Press the clutch and brake pedals all the way down. The clutch needs to be pressed down so that you can move the stick shift into neutral. The brake pedal or emergency brake should also be engaged so that your truck doesn’t roll when you put it in neutral. Use your left foot to press down on the clutch and use your right foot to press down on the brake. [5] X Research source
- If your emergency brake is on, you don’t have to push your brake pedal as hard as you normally would.
-
Push the stick shift into the center to put the truck into neutral. If you don’t put the truck in neutral when you start it, you’ll stall out. With the brake and clutch depressed, move the stick shift into the center of its axis to put it in neutral. You should be able to wiggle the stick around, and it shouldn’t feel like it’s locked into place. [6] X Research source
-
Push the ignition button or turn the key to start the truck. With the stick shift in neutral and both pedals still depressed, start your truck. For a traditional ignition, simply turn the key clockwise in the ignition. Newer trucks may require you to press a button instead. [7] X Research source
-
Push the stick shift into first gear. With the brake and clutch still pressed, move the stick shift to the left and then up. Wiggle the stick a bit to make sure that it’s locked into place. You have now successfully started up the truck and are ready to start driving. [8] X Research source
- Release the brake. Disengage your emergency brake, if it’s on, and lift your foot off the brake pedal. Your truck can now move forward. [9] X Research source
Advertisement
-
Press down slowly on the gas while lifting off on the clutch with your left foot. Lift off the clutch and press down slowly on the gas with your right foot in one fluid motion to make your truck move forward. Don’t slam down on the gas too hard or you may stall out the truck. [10] X Research source
- If you stall out, simply turn off the truck and repeat the process over again.
-
Continue to press down on the gas until the truck reaches 3,000 RPM. Look down at the different meters behind your steering wheel. Typically RPMs will be on the right-hand side. Once the needle on the RPM meter reaches 3,000, you need to switch to the next highest gear. [11] X Research source
- As you drive the truck, you’ll hear the engine rev and overwork as you move faster.
- Staying in a gear that’s too low for the speed that you’re going may damage your transmission.
-
Push down on the clutch with your left foot and put the truck into second gear. While you’re still in motion, slowly lift off the gas while pushing down the clutch and put the stick shift down and left, or in the second gear position. This is the same method that is used to switch to the higher gears. [12] X Research source
- You won’t be able to move the stick shift without pressing down on the clutch first.
- This move should happen in one fluid motion.
-
Lift off the clutch and press down on the gas. Once your truck is in second gear, re-engage the gas and lift your foot off of the clutch. You should now be driving in second gear. [13] X Research source
-
Repeat the process to go to higher gears. Once you get used to driving a stick shift, you'll be able to listen to the engine and hear when you need to upshift or downshift. If you're just starting off, make sure to keep an eye on your RPMs. Everytime your RPMs reach 3,000, you should switch to the next highest gear.
- Being in the right gear will make your truck more fuel efficient.
Advertisement
-
Downshift when you need to slow down. Downshifting helps regulate the speed of the truck and is useful if the traffic slows down in. To downshift, press down on the clutch while engaging the brake and put your truck in the next lowest gear. Once it’s in gear, let off the clutch and press down on the gas to maintain your speed. [14] X Research source
- You never really have to downshift into first gear because second gear doesn’t require high RPM.
-
Put the stick shift into neutral when you stop. Unless you want to stall out, you need to put the truck into neutral whenever you want to come to a complete stop. To do this, press down on the clutch while letting off of the gas and push the stick into the center. Then, once the truck has been put in neutral, you can stop and start the truck’s momentum without stalling out. [15] X Research source
-
Use the brake instead of the gas when reversing. Pressing on the gas pedal in reverse can feel jerky and fast. Instead of pressing down on the gas in reverse, use the disengaged clutch and brake to control your truck. Slowly lift off the clutch with your left foot and tap on the brake with your right foot to control the truck. This trick will work unless you’re on a steep hill, in which case you may need to apply the gas pedal. [16] X Research source
Advertisement
Expert Q&A
Search
-
QuestionHow do you change gears smoothly when driving a stick shift?Ibrahim Onerli is a Driving Instructor and the Manager of Revolution Driving School in New York City. His mission is to make the world a better place by teaching safe driving. Ibrahim trains and manages a team of over eight driving instructors. He specializes in teaching defensive driving and stick shift driving.While the car is in motion, take your foot off the gas pedal, press the clutch, and change the gear. Then gradually take your foot off the clutch and apply the gas. That's what you should do to change the gear.
-
QuestionWhat are the high gears for trucks?Wikiuser 101qCommunity AnswerA high gear for a pickup truck would be about sixth. A semi's high gear would be about 13 or 14.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
References
- ↑ Ibrahim Onerli. Driving Instructor. Expert Interview. 18 November 2019.
- ↑ Ibrahim Onerli. Driving Instructor. Expert Interview. 18 November 2019.
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://jalopnik.com/5230172/how-to-drive-a-stick-shift-in-ten-easy-steps
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://www.digitaltrends.com/cars/how-to-drive-manual/
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://youtu.be/3h74K39hK2U?t=1m19s
- ↑ https://www.digitaltrends.com/cars/how-to-drive-manual/
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://www.dmv.org/how-to-guides/driving-stick.php
- ↑ https://jalopnik.com/5230172/how-to-drive-a-stick-shift-in-ten-easy-steps
- ↑ https://jalopnik.com/5230172/how-to-drive-a-stick-shift-in-ten-easy-steps
- ↑ https://jalopnik.com/5230172/how-to-drive-a-stick-shift-in-ten-easy-steps
About This Article
Article Summary
X
Driving a stick shift truck can be intimidating at first, but once you know the right techniques, it’ll become second nature. Starting your truck is a bit different in a stick shift truck. You’ll need to be in neutral and press the clutch down to start the engine. Some vehicles will need you to press the brake too. You’ll need to change gear whenever your engine reaches about 3,000 revs per minute. You’ll know it’s time to shift when you hear the engine working harder. All you need to do is push the clutch down, shift the stick to the next gear, and ease off the clutch while easing on the gas. Familiarize yourself with the shift pattern so you won’t need to think about it while you’re driving. For more tips, including how to use engine braking in a stick shift truck, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 121,120 times.
Reader Success Stories
- "I'm completely lost to how I should drive a manual truck. This article has made me a little more knowledgeable and comfortable with a manual. Thank you." ..." more
Advertisement
96%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm completely lost to how I should drive a manual truck. This article has made me a little more knowledgeable and comfortable with a manual. Thank you."
..."
more
"Reversing the truck without using the gas pedal."
