How to Field Dress a Deer

PDF download Download Article
PDF download Download Article

After shooting a deer, field dressing is the most important step in getting high quality meat (venison) from the animal. For the most part, all you need to field clean a deer is a sharp knife and a strong stomach. Once you've gutted the deer, drag it to your vehicle and transport it home or to a butcher to skin and quarter it.

Part 1
Part 1 of 3:

Making it Safe to Clean the Deer

PDF download Download Article
  1. After shooting the deer, close the distance between you and the deer to make sure you can deliver another shot if the deer is still alive. Approaching an injured deer is very dangerous, so if you see signs that the deer is still alive, you can either shoot the deer again or wait for it to die.
    • Do not approach a live deer to slice its throat with a knife. Deer can be very dangerous when injured.
    • Aim about a third of the way up the body of the deer, directly behind the front shoulder when firing a second shot. That’s the vicinity of the deer’s heart.
  2. Once you’re sure the deer is dead, you need to clear the firearm before safely setting the weapon aside to clean the deer. Remove the magazine (if present) and clear the chamber or barrel. Make sure to visually confirm that there are no rounds or shells still in the chamber or barrel. [1]
    • Different shotguns and rifles utilize different loading mechanisms. Clearing a muzzleloader, breach loader, pump shotgun, bolt action, or a semi-automatic rifle all require different methods you should be apprised with well before hunting deer.
  3. If a game warden approaches you while cleaning your deer, you will be expected to be able to show the tag you’ve attached to the deer. Fill out the required information on the tag (which varies depending on local government but usually includes date and time of the kill) and tie it to the deer in a visible spot. [2]
    • Most states don’t require the tag be placed anywhere specifically, just as long as its visible. [3]
    • The tag must stay on the deer until it's done being transported and has been quartered.
  4. Chances are good that the deer didn’t die in the best spot to be field cleaned. Grab it by the hind legs and pull the deer to a suitable clearing that is preferably on a slight incline. [4]
    • Never pick up and carry a dead deer. Other hunters may mistake it for a live one and shoot you.
    • Look for a clear patch of grass with a slight incline.
  5. Once you’ve determined where you’ll field dress the deer, remove an article of clothing that’s blaze orange and hang it near you on a tree. It may be your hat, jacket, vest, or any other piece of orange fabric you’re carrying. This will catch the eye of other hunters and reduce the chances that you could be shot while you work. [5]
    • You may want to remove your jacket to avoid getting it bloody anyway.
    • Try to keep something blaze orange on your body for safety as well, such as a hat.
Part 2
Part 2 of 3:

Removing the Entrails

PDF download Download Article
  1. Drag the deer by its front or hind legs to position it. If you were able to find a slight incline, keeping the head higher than the body will direct the flow of blood while you work and help to prevent creating a big mess in your workspace.
    • If there are no hills or inclines around you can still clean the deer.
  2. Pinch the skin and hair together with your thumb and index fingers and pull it away from the deer’s body. Then insert a sharp knife to carefully begin cutting away the skin without penetrating the organs and entrails beneath it. Use a sharp 2 to 4 in (5.1 to 10.2 cm) fixed blade hunting knife. [6]
    • Piercing the deer’s stomach or entrails could release contaminants that might ruin the meat.
    • Be very careful not to cut your hands or fingers while cutting the skin.
  3. While you could feasibly cut the skin along with the muscle of the deer, separating it ahead of time will reduce the chances that you get any hair or debris in the meat. [7]
    • Slice in a straight line, holding the skin up and away from the meat of the deer when necessary to avoid cutting deeper into the organs of the stomach.
    • You can pull the skin to the side a little while working, if necessary.
  4. Again, be very careful not to cut too deep into the deer as you slice into the muscle tissue. Cut just a large enough hole through that muscular barrier to insert your knife and 2 fingers. Once done, insert those 2 fingers into the hole with your palm facing up and spread them into the shape of a “V” or peace sign. [8]
    • The muscular barrier you cut through is also sometimes called an abdominal wall.
    • It is not required, but you can wear gloves for this step if it makes you more comfortable.
  5. Place the back or spine of the blade between the knuckles of the 2 fingers you have inserted. Press up with those fingers to keep the muscle separated slightly from the entrails and organs found beneath it. [9]
    • Your fingers will guide the blade and because it’s facing upward, it won’t cut the entrails beneath the muscle.
  6. Keep your fingers inserted as you begin to cut a straight line through the deer’s muscle the entire length of its belly. As you move the knife further up, move your fingers along with it to keep the muscle separated from the entrails. [10]
    • Cut from the deer’s pelvis all the way up to its sternum.
    • Try to keep the cut centered on the deer’s midline as you go.
  7. Some states require that you leave a buck’s sex organs intact to verify its gender, however, if you don’t live in such a state you may choose to cut away the sex organs as you work. Reach inside the body cavity and cut the penis and testicles at their base to remove them. [11]
    • You may also cut out the udders of female deer. Cut around both sides of each udder to remove them.
  8. With female deer, make the hole larger to include the vagina. Then pull the anus up from the inside and tie it off like you would a balloon. This will prevent anything from leaking out of it and spoiling the meat.
    • The cut around the anus and vagina should be about 4 inches (10 cm) deep. Be careful not to puncture the rectum while cutting.
  9. With the deer on one side, start by removing the pear-shaped translucent sac near the bottom of the abdomen (the bladder). Pinch the tube going into the bladder and cut just above where you’ve pinched to avoid letting any urine leak onto the meat. After that, most of the entrails will come out of the deer pretty easily until you get to the back. [12]
    • Most of the entrails you remove at this point will be the deer’s stomach, colon, and intestines. The rest will be in the chest cavity.
    • Reach into the cavity and cut the entrails and organs loose from the back of the stomach once you’ve pulled them all out.
    • Use the same method as you did with the bladder to pinch off the esophagus when cutting the stomach cavity free to avoid any old food from spilling out.
Part 3
Part 3 of 3:

Cleaning out the Chest Cavity

PDF download Download Article
  1. Some hunters may choose to leave the chest intact for mounting purposes. Otherwise, use your knife to saw through the sternum and up into the chest for easier access to the organs housed inside. [13]
    • Keep the blade oriented down toward the deer as you press down and saw back and forth with the blade to separate the sternum the best you can.
    • You can still access the organs in the chest without doing this, but it may make it easier.
  2. The diaphragm is a thin layer of tissue that holds the entrails on the ribs of the deer. Slide your hand into the chest cavity and use the blade to cut the diaphragm away from the ribs so the entrails come out easily. [14]
    • If you want to keep them, separate the heart and lungs by cutting them free from the organs you’ve removed. Place each in separate plastic bags and put those bags in a cooler if you have one available.
    • Don’t pull anything out of the chest cavity as you cut unless it comes out loose.
    • Be extremely careful cutting inside the chest cavity where you can’t see.
  3. Depending on whether or not you were able to saw through the rib cage, this can be a difficult step. Reach both hands up into the chest cavity toward the deer’s head and grab the windpipe and esophagus (2 tubes running up to the deer’s mouth). Grip them both with your non-dominant hand and cut both tubes. [15]
    • This will separate the windpipe and esophagus from the deer’s mouth above where you cut.
    • Move slowly and deliberately to ensure you don’t accidentally cut yourself.
    • Don’t let go after you cut the windpipe and esophagus.
  4. Remove the entrails and organs out of the deer’s chest by keeping your grip of the windpipe and esophagus as you pull your hand back down toward the stomach and out of the deer. Use the knife to cut any snags that hinder your progress. [16]
    • If you cut the diaphragm well, most of the entrails will come sliding out as you pull.
    • Most of the entrails of the deer will now be removed.
  5. Use any sturdy stick you find lying around to help hold the opening open. Propping the cavity open will allow you to get a good look inside to spot anything you may have missed while also helping to dry the cavity out.
    • It can be difficult to see down into the cavity while you’re working. With the stick in place, it will allow more light to get in.
  6. If you choose, you can use clean water to help clean out the cavity, but its not necessary. Remove any chunks of entrails or debris that may have fallen into the cavity while you were working. [17]
    • Be sure the cavity is cleaned out completely. Use a knife to cut away anything that’s left stuck to the inside of the ribs.
    • If you use water, you can also use paper towels or whatever else you have around to help dry it out.
    • Cleaning out the entrails and drying the meat is the most effective way to prevent spoilage until you can get the deer quartered and refrigerated.
  7. During that time the deer will cool and more of the blood will drain out. Draining the blood will reduce the weight of the deer and make it much easier to transport out of the woods. If you have a long drive home, add ice to the body cavity and wrap the deer in plastic to protect it from exposure to heat and debris.
    • You may want to prop the deer up on a nearby tree to help with draining.
    • Be careful not to slip in the blood while working around the deer’s body.
    • Cleaning and drying the meat will help to prevent spoilage. Get the deer out of the woods and quartered as quickly as you can once it's dry.

Community Q&A

Search
Add New Question
  • Question
    Why is this necessary?
    Lily Ireland
    Community Answer
    This is necessary to preserve the meat and to avoid having it spoil.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 33
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Video

      Tips

      • The job's easier if you use a sharp knife with a gut hook.
        Thanks
        Helpful 4 Not Helpful 0
      • Be aware if your area has deer with Chronic Wasting Disease (CWD) and what to do if you suspect your deer has it. If you shoot a deer that appears emaciated or acted sick prior to dying, don’t eat the meat and inform your local game warden.
        Thanks
        Helpful 5 Not Helpful 1
      • Cutting and spreading the rib cage makes it a bit easier to get all the guts out and cut the windpipe, and also helps the body cavity cool quicker.
        Thanks
        Helpful 3 Not Helpful 1
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • A sharp knife
      • A bone saw or zip saw
      • Disposable gloves
      • A few bags (to carry out trash)
      • Water and some paper towels
      • Drag rope

      You Might Also Like

      How to
      Go Deer Hunting
      How to
      Aim a Pistol
      How to
      Clean a Deer Skull
      How to
      Dress a Deer
      How to
      Make Snare Traps
      2 Effective Ways to Tan a Hide at Home
      How to
      Skin a Deer: Step-by-Step Instructions & Pictures
      How to
      Tan a Deer Hide
      How to
      Call Deer
      How to
      Make a Rabbit Snare
      How to
      Skin a Raccoon
      How to
      Skin and Gut a Rabbit
      How to
      Mount Antlers
      How to
      Clean a Deer

      References

      1. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      2. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      3. ↑ https://tpwd.texas.gov/regulations/outdoor-annual/licenses/tagging-instructions/tagging-deer
      4. ↑ https://files.dnr.state.mn.us/fish_wildlife/wildlife/disease/cwd/cwdfdbrochure.pdf
      5. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      6. ↑ https://ucfoodsafety.ucdavis.edu/files/26399.pdf
      7. ↑ https://wildlife.ohiodnr.gov/portals/wildlife/pdfs/publications/hunting/pub111.pdf
      8. ↑ https://extension.psu.edu/field-dressing-deer-pocket-guide
      9. ↑ https://extension.psu.edu/field-dressing-deer-pocket-guide
      1. ↑ https://wildlife.ohiodnr.gov/portals/wildlife/pdfs/publications/hunting/pub111.pdf
      2. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      3. ↑ https://wildlife.ohiodnr.gov/portals/wildlife/pdfs/publications/hunting/pub111.pdf
      4. ↑ https://files.dnr.state.mn.us/fish_wildlife/wildlife/disease/cwd/cwdfdbrochure.pdf
      5. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      6. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      7. ↑ https://www.michigan.gov/documents/dnr/how_to_field-dress_deer_493715_7.pdf
      8. ↑ https://extension.psu.edu/field-dressing-deer-pocket-guide

      About This Article

      Article Summary X

      To field dress a deer, put on gloves to prevent possible contamination. Next, lay the deer on its back, find its sternum, and make a cut from the sternum to the crotch, penetrating the deer's hide and membrane but not its guts. Then, start from the deer's crotch and pull out its guts while you cut the membranes linking the innards to the spine and diaphragm. Sever the last membranes holding its guts, and pull the guts free. Finally, pound your knife through the center of its pelvic bone, cut the skin around the anus, and pull out the colon. To learn how to field dress a deer if you’ve got a hoist, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 564,217 times.

      Reader Success Stories

      • Anonymous

        Oct 24, 2017

        "The YouTube video link was helpful. I feel like there are so many videos on YouTube, and a beginner may not know if ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?