How to Give Plants Iron

PDF download Download Article
PDF download Download Article

If your plants are low in iron, you may notice that the leaves start to take on a yellow, spidery look. Luckily, there are a number of different ways to treat this, depending on the severity of the problem. For a temporary way to treat smaller plants and shrubs, you can spray iron directly on the leaves. If you'd prefer to treat the soil, you can use chelated iron for an inexpensive fix, or ferrous sulfate for a longer-lasting treatment.

Method 1
Method 1 of 3:

Spraying the Leaves

PDF download Download Article
  1. Chelated iron sprays are available at most well-stocked garden centers and home stores. However, if you'd like to make your own inexpensive version, you can dissolve 2 fluid ounces (59 ml) of ferrous sulfate in 3 US gal (11 L) of water. This will create a 0.5% solution, which is safe to apply to plants. Pour it into a pump sprayer, like the kind you'd use to spray liquid fertilizer or insecticide. [1]
    • If you buy a commercial product, be sure to carefully follow the application instructions on the label.
    • If you're making your own spray, choose ferrous sulfate that is 20-22% iron.
    • Try adding 2-3 drops of dishwashing soap for every 1 US gal (3.8 L) of either commercial or homemade spray. This will help the spray adhere to the plant's leaves.
  2. In order for an iron spray to improve your plant's health, you have to use it during the growing season. You can spray new growth starting in the early spring, all the way through full foliage in the late summer.
    • Once the fall hits, the plant will start to become dormant, and it will remain dormant through the winter. During this time, the iron won't have much effect, even if the plant retains its leaves through the winter. [2]
    Advertisement
  3. If you apply chelated iron to the plant's leaves at mid-day when it's hot out, you could burn the plant's foliage. Instead, wait for a cool, cloudy day to spray the iron. If the weather is warm and isn't forecast to cool down anytime soon, wait until the evening, when it should be a little cooler out. [3]
    • If the iron burns the leaves, the edges will start to curl and turn brown.
  4. If only part of the plant seems affected, focus mostly on that area. However, since this is a mild treatment, it's okay if some of the spray gets on leaves that aren't showing signs of iron deficiency. [4]
    • It's fine if some of the spray gets onto the ground around the plants. However, since the solution isn't strong, it's not likely to have much of an effect on the iron content of the soil.
    • You'll likely notice results in just a few days.
  5. Iron sprays are just a temporary fix for your plants. The yellowing might improve after a few days, but if you notice it returning, or if new leaf growth looks yellow, you'll need to spray the plants again.
    • Even though this isn't a long-lasting fix, it can help keep your plant healthy while you work to improve the soil.
    6. Advertisement
Method 2
Method 2 of 3:

Treating the Soil with Chelated Iron

PDF download Download Article
  1. You'll need about 3–5 oz (85–142 g) of iron fertilizer for every 100 sq ft (9.3 m 2 ) of soil you're treating. Just be sure the chelate you choose contains FeEDDHA. Other options won't be as effective, especially in soils with an elevated pH level. [5]
    • Both powdered and granulated iron will be easy to mix into the soil, and they'll be readily absorbed by the plants. You can find chelated iron at many big box stores, lawn and garden stores, or online.
    • Make sure the label indicates that all of the iron in the supplement is chelated. Some iron supplements will say "chelated" on the label even some of the iron is in a different form. [6]
    • Also, if the supplement you're using contains a fertilizer, be sure it doesn't have phosphorus in it. Too much phosphorus in the soil can contribute to iron deficiency. [7]
  2. It's best to either treat the soil in the spring, right at the start of the growing season. However, you can also use chelated iron in the fall just before the plant goes dormant. In the spring, the plant will be pulling nutrients from the soil as it prepares to bud. If you apply it in the fall, the iron will be able to gradually absorb into the plant's roots throughout the winter. [8]
    • Either way, you'll probably have to reapply the treatment once a year, so just pick the time of year that will be most convenient for you every year.
  3. Following the application instructions on the container, simply shake the chelated iron directly around the base of each of the plants you need to treat. Then, water the ground thoroughly. [9]
    • If you'd prefer, you can also dissolve the iron in water, then spray that around the base of the plant.
    • This is a good option for treating shrubs, smaller gardens, or individual trees, but since chelated iron can be expensive, it's not ideal for treating larger areas.
  4. Treating the soil with chelated iron will usually help correct and prevent iron deficiency for about a year. However, if you treat the plant in the spring and it's still showing symptoms, you may need to treat the plant again later in the growing season. [10]
    5. Advertisement
Method 3
Method 3 of 3:

Adding Ferrous Sulfate to the Soil

PDF download Download Article
  1. Purchase both of these ingredients from a lawn and garden store. Then, pour an equal measure of each into a large bucket or bin. [11]
    • Don't mix these ingredients in any pots or bowls that you plan to prepare food in later on.
    • Read the label to make sure you're choosing a ferrous sulfate product that contains a high concentration of iron.
    • Wear gloves and eye protection when you're working with iron sulfate. Also, work in a ventilated area, and consider wearing a respirator if you'll be working with large amounts.
  2. For larger shrubs, measure about 12–24 in (30–61 cm) away from the base of the plant. Then, use a handheld hoe to dig a hole about 4 in (10 cm) deep, going all the way around the base of the plant.
    • Be sure not to dig so deep that you damage the plant's roots. [12]
    • Check with your local utility companies before you dig in an area that might have utility lines.
  3. The crown line, also known as the drip line, is where the outer edge of the plant's leaves stop. Use an augur to make holes that are 1–2 in (2.5–5.1 cm) wide and about 12–18 in (30–46 cm) deep. Space the holes about 18–24 in (46–61 cm) apart. The amount of holes you'll need depends on the diameter of the plant's trunk: [13]
    • 4 holes for a 1 in (2.5 cm) diameter
    • 6 holes for a 2 in (5.1 cm) diameter
    • 8 holes for a 4 in (10 cm) diameter
    • 12 holes for a 6 in (15 cm) diameter
    • 16-24 holes for an 8 in (20 cm) diameter
    • 25-30 holes for a 10 in (25 cm) diameter
    • 30-40 holes for a 15 in (38 cm) diameter
    • 40-50 holes for a 20 in (51 cm) diameter
  4. If you dug holes to treat a tree, pour in enough of iron to fill the hole up to about 4 in (10 cm) from the top If you dug a trench, pour 1 in (2.5 cm) of ferrous sulfate into the bottom. [14]
    • Be careful not to get the iron on your skin or in your eyes, and avoid breathing it in.
  5. If you dug holes, fill in the last 4 in (10 cm) with some of the dirt that you removed. If you dug a trench, loosely pack it all the way up to the top with the dirt. If you'd like, you can then water the area. [15]
    • If you used an augur to make your holes, it should have removed the dirt, rather than just compacting it. That will ensure you have the excess soil you need to fill the holes back in.
    • This treatment will typically last up to 2-4 years, so you shouldn't have to repeat the treatment until the next time the plant shows symptoms.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I make my soil healthier?
    Jeremy Yamaguchi
    Lawn Care Specialist
    Jeremy Yamaguchi is a Lawn Care Specialist and the Founder/CEO of Lawn Love, a digital marketplace for lawn care and gardening services. Jeremy provides instant satellite quotes and can coordinate service from a smartphone or web browser. The company has raised funding from notable investors like Y Combinator, Joe Montana, Alexis Ohanian, Barbara Corcoran and others.
    Jeremy Yamaguchi
    Lawn Care Specialist
    Expert Answer
    Aeration is a helpful practice, as compacted soil can affect your lawn's ability to absorb nutrients. Lawn aeration is the professional practice of punching holes throughout your lawn.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If your plants are iron deficient, the leaves will turn yellow with dark green veins, giving them a spidery look. If the iron deficiency isn't treated, the leaves might then start to turn white and die. [16]
        Thanks
        Helpful 1 Not Helpful 0
      • If you're not sure if your plants are iron deficient, test the pH of your soil. If the pH is above 7.0-7.5, it's likely that you have an iron deficiency. For more thorough soil testing, check with your local agricultural extension center. [17]
        Thanks
        Helpful 0 Not Helpful 0
      • Iron deficiency might show on the whole plant, a single branch, or even just a few leaves. [18]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you'll be working with iron (ferrous) sulfate or chelated iron, wear gloves and safety goggles, and work in a ventilated area or wear a respirator. If either of these substances gets into your eyes, flush them with water for at least 15 minutes. If they get on your skin, wash it thoroughly with water.
        Thanks
        Helpful 1 Not Helpful 1
      • Overwatering your plants can cause iron deficiency or make it worse. [20]
        Thanks
        Helpful 0 Not Helpful 0
      • When you're working with iron supplements, be careful not to spill it on your sidewalks or other surfaces, as it could leave a stain. [21]
        Thanks
        Helpful 0 Not Helpful 0
      • Some folk remedies recommend burying scrap iron under a tree to fix an iron deficiency. However, it's not a good idea to bury sharp, rusted metal in your lawn. [22]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Diagnose Animal Holes in Your Yard
      9 Effective Ways to Get Rid of Stickers in Your Yard
      How to
      Keep Dogs off Your Lawn
      How to
      Jump Start a Lawn Mower
      How to
      Mow the Lawn: Top Tips for Cutting Grass
      How to
      Clean Artificial Grass
      How to
      Install Plastic Lawn Edging
      How to
      Grow a Lawn Easily
      How to
      Clean Dog Urine Out of Artificial Grass
      How to
      Overseed a Lawn
      How to
      Edge a Lawn with String Trimmer
      How to
      Install Artificial Turf
      How to
      Replace an Old Lawn
      How to
      Get Rid of Weeds Without Killing Grass
      Advertisement

      References

      1. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
      2. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
      3. ↑ https://extension.arizona.edu/sites/extension.arizona.edu/files/pubs/az1415.pdf
      4. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
      5. ↑ https://extension.usu.edu/forestry/trees-cities-towns/tree-care/preventing-iron-chlorosis
      6. ↑ https://extension.arizona.edu/sites/extension.arizona.edu/files/pubs/az1415.pdf
      7. ↑ https://ipm.ucanr.edu/PMG/GARDEN/PLANTS/DISORDERS/irondeficiency.html
      8. ↑ https://extension.okstate.edu/fact-sheets/identifying-and-correcting-iron-deficiencies-in-ornamentals.html
      9. ↑ https://ipm.ucanr.edu/PMG/GARDEN/PLANTS/DISORDERS/irondeficiency.html
      1. ↑ https://extension.okstate.edu/fact-sheets/identifying-and-correcting-iron-deficiencies-in-ornamentals.html
      2. ↑ https://losalamosextension.nmsu.edu/documents/iron-chlorosis.pdf
      3. ↑ https://losalamosextension.nmsu.edu/documents/iron-chlorosis.pdf
      4. ↑ https://www.missouribotanicalgarden.org/gardens-gardening/your-garden/help-for-the-home-gardener/advice-tips-resources/insects-pests-and-problems/environmental/iron-chlorosis
      5. ↑ https://www.missouribotanicalgarden.org/gardens-gardening/your-garden/help-for-the-home-gardener/advice-tips-resources/insects-pests-and-problems/environmental/iron-chlorosis
      6. ↑ https://cmg.extension.colostate.edu/Gardennotes/223.pdf
      7. ↑ https://cmg.extension.colostate.edu/Gardennotes/223.pdf
      8. ↑ https://extension.sdstate.edu/how-prevent-iron-deficiency-spring-greenhouse-plants
      9. ↑ https://extension.sdstate.edu/how-prevent-iron-deficiency-spring-greenhouse-plants
      10. ↑ https://extension.umn.edu/crop-specific-needs/managing-iron-deficiency-chlorosis-soybean
      11. ↑ https://extension.umn.edu/crop-specific-needs/managing-iron-deficiency-chlorosis-soybean
      12. ↑ https://pubs.nmsu.edu/_h/H171/index.html
      13. ↑ https://pubs.nmsu.edu/_h/H171/index.html

      About This Article

      Thanks to all authors for creating a page that has been read 70,003 times.

      Did this article help you?

      Advertisement