How to Install Decomposed Granite

PDF download Download Article
PDF download Download Article

Decomposed granite is a type of surfacing material made up of crushed rock. Since it is firm and water-resistant, it is often installed as a natural alternative to material like pavement. It also happens to be relatively easy to install on your own even if you don’t have much construction experience. A successful installation depends on excavating and flattening a well-drained spot. After surrounding the area with edging to hold the granite in place, fill in the hole and smooth out the material to create a level finish. The finished surface is great for gardens, driveways, patios, and many other projects.

Part 1
Part 1 of 3:

Excavating the Ground

PDF download Download Article
  1. Decomposed granite can be washed away by flowing water, so choosing flat ground makes it last longer. For example, don’t place it near the bottom of a hill, since water will flow down toward it. When you see areas that aren’t level, dig out excess soil and rake the ground flat. Also, be aware of any utility lines that could be in the area and call your local utility company to mark their location so you don't accidentally damage them.
    • You may need to level out some parts of your yard in order to install the granite. For example, if you’re planning on building in a recessed area, excavate nearby raised areas as well to prevent runoff from flowing toward the granite.
    • You may need to work around utility lines unless you’re willing to pay to move them, which can cost $300 USD or more.
    • Keep the granite away from your home's foundation, especially if the roof doesn’t have gutters. Rain will roll off the roof and onto the granite, ruining it.
  2. Mark the spot you plan on excavating for the installation. Doing this will help you plan out the work so the granite layer is consistent and even on all sides. The easiest way to create the outline is by using chalk spray paint. Make the outline as accurate as possible, taking time to measure the lines as needed to ensure they are the correct length for what you plan on building. [1]
    • Getting the outline correct is important since the construction work could cause problems later if it is done incorrectly. Note the outline’s location and dimensions to ensure that the granite will fit where you intend on placing it.
    • All of the tools you need for the installation, including chalk and granite, are available online and at most home improvement stores.
    Advertisement
  3. The exact depth will depend on the project, but a 4 in (10 cm) layer of granite is enough for most areas that will receive heavy traffic. Use shovels to remove soil from the excavation area. This will be where you pour the granite later, so make sure it is cleared out sufficiently. If you don’t dig deeply enough, the granite layer could end up being shallow or uneven.
    • A 4 in (10 cm) depth is a good starting point for most pathways. For patios, driveways, and other areas that experience heavy foot traffic, try installing a 6 in (15 cm) for extra durability.
    • If the soil is soft or sandy, plan on installing a thicker layer of granite. Try making excavating 6 in (15 cm) or deeper.
    • You can always dig deeper to fit more granite. It increases the cost of the project, but the thicker layer helps ensure the granite lasts longer.
  4. Dig up any rocks, tree roots, and other debris left in the hole. Once the area is clear, rake the soil to finish flattening it. Then, use a tool like a plate compactor to compress it. To use a compactor, turn it on and push it over the soil several times. The soil has to be consistent so the granite doesn’t shift after the installation. [2]
    • If you don’t have a compacting tool, check with your local home improvement store. Some places rent out mechanical plate compactors.
    • You could also use a handheld tamper, which is a square tool you can push against tough to reach areas to flatten them. For a more makeshift option, lay down a wood board and hammer it to flatten the soil.
    5. Advertisement
Part 2
Part 2 of 3:

Framing the Construction Area

PDF download Download Article
  1. Header boards are basically boundaries meant to keep the granite packed into the hole you dug. The most common type of edging material is called redwood bender boards. The boards are flexible, making them useful for framing even curved granite paths. Bend the boards by hand, pressing them into the soil to place them. Overlap each board by about 1 in (2.5 cm) so it can expand with the weather. [3]
    • There are several different types of edging you can use for your project. Metal is a sturdy alternative to wood that works well for almost any project. Plastic is also useful, especially around gardens.
  2. Choose 12 in (30 cm) wood stakes if you’re using wood bender boards. Start at one end of your project and measure out from there, planting stakes as you go. Put the stakes on alternating sides, keeping them right up next to the boards. Plant them by hammering them down into the soil until they are 1 in (2.5 cm) below the tops of the boards, then secure them to the boards with screws or nails. [4]
    • Secure each stake with a single screw or nail. Position the fastener against the middle part of the stake on its outer edge. When you secure everything together, the fastener will pass through the stake and into the header boards.
    • Metal headers often have slots for metal stakes, so you don’t need to screw them in place. Plastic edging material often does not require stakes.
    • When you’re done installing the stakes, you can hammer the boards down until they are level with the ground if you wish to hide them.
  3. If you suspect that weeds will be an issue, get a roll of weed barrier fabric and some galvanized garden staples. Roll the fabric out so it covers the area you excavated. Place the staples about every 1 ft (0.30 m) along the edges of the fabric. Then, hammer them through the fabric to secure it to the ground. [5]
    • You may need to cut the fabric to fit it into the hole, especially if you’re making a curved path. Use a utility knife to cut it to size.
    • Installing a weed barrier is optional, although it often works well for garden areas and paths.
    • A weed barrier is meant to stop weeds from growing underneath the fabric. Over time, weeds may eventually settle on top of it. The fabric can also prevent water from draining through the granite as quickly as it usually does.
    4. Advertisement
Part 3
Part 3 of 3:

Adding the Granite

PDF download Download Article
  1. Measure the length, width, and depth of the hole you dug in feet. If it is uneven, such as for a path, measure its entire length, then measure the width where the path is widest. Multiply all 3 measurements together to determine the overall size of the hole. Decomposed granite is often sold by the cubic yard, so divide the size measurement by 27, the number of cubic yards in a cubic foot, to determine how much granite you need. [6]
    • For example, a hole 20 ft long, 10 ft wide, and 4 in deep is about 66 cubic feet. Divide 66 by 27 to convert it into about 2.47 cubic yards of stone.
    • For additional help, look up a coverage calculator for decomposed granite or stone. Type the hole dimensions into the calculator to determine how much granite you need to buy.
  2. It is pre-treated with a stabilizer that causes it to stick together, making it very effective for pathways and patios. It is also efficient to install. If you get regular granite, you could also treat it with a liquid stabilizer to get it to stick together. You can usually buy sacks of granite at home improvement stores and then pour the stones into the construction area yourself. [7]
    • Regular, or natural, decomposed granite, is the least expensive type and is very porous. It works well as a mulch around gardens or other areas that require efficient water drainage.
    • Resin decomposed granite is treated for extra stability and durability. Since it’s similar to asphalt, it’s useful for areas that experience a lot of heavy traffic, like roads or driveways.
    EXPERT TIP

    Sina Kamran

    Hardscape Specialist
    Sina Kamran is a Hardscaping Specialist and the Owner of Design Scapes, Inc. in Santa Monica, California. With over 15 years of experience, he specializes in customized, site-specific hardscaping and landscaping design/build projects. He's a certified National Concrete Masonry Association (NCMA) designer, a certified installer with the Interlocking Concrete Pavement Institute (ICPI), and a Rain Bird Certified Irrigation Professional. Additionally, Design Scapes, Inc. has many 5-star rated reviews.
    Sina Kamran
    Hardscape Specialist

    Choose decomposed granite for an eco-friendly patio. Decomposed granite, made from crushed rock, is a great natural alternative to pavement for outdoor surfaces. It creates a firm, water-resistant layer for walkways, patios and more. With its natural look that blends into landscaping, it's an eco-friendly, visually pleasing surfacing choice.

  3. Scatter the granite by hand, with shovels, or with a wheelbarrow. Make sure it is roughly the same depth throughout the hole. If you’re uncertain about the layer’s thickness, measure it with a ruler or tape before filling in the entire area. When you’re done, smooth out the granite with a steel rake or shovel. [8]
    • The exact depth of the layer isn’t as important as its consistency. If it isn’t level now, the finished project may not turn out the way you envisioned.
    • Decomposed granite surfaces are layered, so don’t fill in the hole all at once. The layers adhere to one another, making the surface stronger. It also gives you more of an opportunity to keep the granite compact and level.
  4. Hook a garden hose up to a nearby water source, then spray all of the granite. Make sure you use enough water to reach the stones at the bottom of the layer. The entire layer will turn muddy and sticky as it absorbs water. [9]
    • One way to check for water absorption is to stick a metal pole through the granite. Note the height of the mark left by the granite on the pole. It should be the same as the layer’s thickness.
  5. It has to be completely dry before it can be built upon and covered by additional material. Wait for it to feel dry to the touch, but check the entire area to make sure there aren’t any hidden spots that haven’t finished settling yet. The required drying time may vary depending on the conditions and can take as long as 24 hours. [10]
    • Cold, damp weather will prevent the granite from drying out as quickly as you would like. If you’re unsure, wait a full 24 hours to ensure it has plenty of time to dry out.
  6. Use a plate compactor for the easiest possible time finishing the gravel layer. It is a machine that rolls over the granite to solidify it into a firm, consistent layer. Go over the granite a few times to ensure it’s packed as tightly as possible. The granite layer loses about 1 in (2.5 cm) in height when it’s compacted, allowing you to build additional layers over it. [11]
    • Most home improvement stores rent out compactors. Compactors are heavy, so you may need to bring a friend along to help you transport it.
    • If you don’t have a compactor, get a heavy roller instead. It’s a heavy, wheel-like tool that you can roll over the granite by hand. A tamper tool can also be helpful, especially for areas you can't reach with a roller.
  7. Add another layer of granite, soak it, and then compact it. Remember to smooth out each layer before adding water. You will also need to wait for each layer to dry before compacting it. Most projects require 3 layers, so keep adding more granite until you reach the desired height. [12]
    • The wait is the longest part, but take your time. The sturdy, level surface you end up with is well worth the patience.
    • Note that the finished height will vary depending on your design. In most projects, the decomposed granite will be level with the rest of your yard. If you’re making a patio, you may wish to elevate it a little more to prevent mulch or other material from spilling over onto it.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • To strengthen decomposed granite, you could add at least 4 in (10 cm) of gravel underneath it. Gravel helps with leveling and water drainage.
        Thanks
        Helpful 0 Not Helpful 0
      • Keep in mind that decomposed granite is sticky and can track into your home. It can scratch your home’s floors if you don’t take time to wipe your shoes clean before going inside.
        Thanks
        Helpful 2 Not Helpful 0
      • Granite will wear away over time. When you notice this happening, water the granite and compact it again to keep it well-conditioned.
        Thanks
        Helpful 0 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Decomposed granite
      • Shovel or excavator
      • Bending boards or other edging material
      • Stakes for edging material
      • Hose
      • Water
      • Plate compactor or roller
      • Tamper tool
      • Weed barrier fabric (optional)
      • Weed barrier staples (optional)

      You Might Also Like

      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make a Brick Kiln
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Drill Through Granite
      How to
      Remove Efflorescence from Brick
      How to
      Clean Soot from Brick
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about working with brick, check out our in-depth interview with Sina Kamran .

      References

      1. ↑ https://www.bobvila.com/articles/3677-how-to-install-landscape-edging/
      2. ↑ https://www.bobvila.com/articles/landscape-fabric/
      3. ↑ https://www.bobvila.com/articles/3677-how-to-install-landscape-edging/
      4. ↑ https://www.familyhandyman.com/landscaping/the-best-garden-bed-edging-tips/
      5. ↑ https://www.bobvila.com/articles/landscape-fabric/
      6. ↑ https://www.youtube.com/watch?v=Q1bdeS19kQU&t=42
      7. ↑ https://www.youtube.com/watch?v=Y1Z8UznTrRw&t=24
      8. ↑ https://www.youtube.com/watch?v=HUEY3rnduns&t=501
      9. ↑ https://www.youtube.com/watch?v=obz4vZoWPPQ&t=116
      1. ↑ https://www.youtube.com/watch?v=HUEY3rnduns&t=525
      2. ↑ https://www.youtube.com/watch?v=obz4vZoWPPQ&t=159
      3. ↑ https://www.youtube.com/watch?v=HUEY3rnduns&t=552

      About This Article

      Thanks to all authors for creating a page that has been read 92,563 times.

      Reader Success Stories

      • Rocco

        Jun 4, 2022

        "Article very helpful to identify install nuances for a parking pad. I'm using cloth, 4" road base and ..." more
      Share your story

      Did this article help you?

      Advertisement