How to Measure an Arm Hole

PDF download Download Article
PDF download Download Article

If you plan to order or create a garment tailored to your figure, you'll need to know how to measure your armhole size. When you're creating the garment yourself, you'll also need to know how to measure the size of the armhole space provided on the pattern.

Method 1
Method 1 of 3:

Taking Your Armhole Measurement

PDF download Download Article
  1. Extend your arm straight out so that it is perpendicular to the rest of your body.
    • You can work with either the left or right arm.
    • It is easiest to take an accurate measurement for your Armhole if you have a second person helping you. Your helper will need to use the tape measure while you keep your arm in position.
    • If you do not have a helper to assist you, it might be easiest to measure the Armhole of your non-dominant arm while using your dominant hand to hold and maneuver the tape measure. You should stand in front of a full-length mirror, as well.
  2. Position the starting (zero) end of the tape measure flat against the center of your shoulder. Draw the tape measure down over the front of your shoulder and arm, pausing once it hits the center of your armpit.
    • This measurement is sometimes referred to as your Armhole depth. [1] It is not a full Armhole measurement, however, so you should keep going if you need the full measurement instead of the depth measurement.
    • Keep the tape measure flat against your body. It should also be vertically straight along the front of your body.
    Advertisement
  3. Continue wrapping the tape measure around your arm and shoulder, drawing it up from behind your shoulder until it meets the starting end. [2]
    • This measurement is your full Armhole measurement.
    • The tape measure must be vertically straight along the back and front of your shoulder. Make sure that it also lies flat against your body.
    • Note that your full Armhole measurement should be twice as large as your Armhole depth. Since it may not be exactly twice as large, though, it is best to take the actual measurement instead of mathematically doubling the depth measurement.
  4. With the tape measure held in place, move your arm around. Rotate it back and forth, then up and down. The tape measure should not be tight enough to restrict the movement of your arm in any way.
    • As a general rule, place two fingers underneath the measuring tape and against your body as you take the measurement. Do not stretch the tape, either. Following these two precautions should prevent the Armhole from being too tight.
    • When in doubt, a measurement that is slightly too large is better than one that is too small.
    • To ensure the arm hole is located in the right place, you should also measure the circumference of your chest; from the center of your back to the tip of your shoulder; and from the center of your back to your hip. [3]
    5. Advertisement
Method 2
Method 2 of 3:

Estimating Armhole Measurement from a Shirt

PDF download Download Article
  1. Choose a shirt with comfortable, appropriately sized arm holes. Spread this shirt out flat over a hard surface, like a table or desk.
    • Smooth out the material so that there is no bunching around the Armhole area.
    • The sleeve length of the shirt does not matter. It can even be sleeveless as long as it has an actual Armhole. Do not use a tank top with spaghetti straps, a halter top, or a strapless top, though.
    • This method is good to use if you do not have a helper to assist you in taking a traditional Armhole measurement.
  2. Make sure that the front of the shirt faces up. Position the starting (zero) end of the tape measure at the top of the Armhole seam, then carefully adjust the tape measure along the curve of the seam until it reaches the bottom.
    • You will need to keep the tape measure on its side as you wind it around the Armhole seam.
    • Keep the tape measure aligned to this seam as precisely as possible.
    • The resulting measurement corresponds to your Armhole depth. It is only about half of your full measurement, though.
  3. Flip the shirt over to the back. Smooth it out, then measure the back Armhole seam with your tape measure.
    • As before, position the starting end of the tape at the top of the Armhole seam. Extend the tape down the curve of the seam until it reaches the bottom.
    • Your front and back Armhole depth will usually be the same. The back Armhole depth can occasionally be larger by as much as 5/8 inch (1.6 cm), though, so it is best to take both measurements separately just to be safe.
  4. Add the front Armhole depth and back Armhole depth together to calculate your total Armhole measurement.
    • This is only an estimate of your true Armhole measurement, so it is not quite as accurate as a traditional measurement would be. Nonetheless, this estimate should still produce satisfactory results in most instances.
    5. Advertisement
Method 3
Method 3 of 3:

Measuring a Pattern Armhole

PDF download Download Article
  1. Look at the front pattern piece and identify the stitching line along the Armhole opening.
    • The stitching line is the dotted line indicating where you will actually make your stitches. Do not measure along the outer perimeter of the Armhole since that measurement would not accurately reflect the dimensions of the eventual hole.
    • If you are drafting the pattern from scratch instead of working with a commercial pattern or previously made pattern, you will need to sketch the stitching line in place. Use a French curve or curved ruler to make sure that the seam allowances are the same all along the Armhole.
  2. Place the starting (zero) end of the tape measure at the top of the Armhole stitching line, just beneath the seam allowance. Extend the tape down along the curve until you reach the bottom seam allowance. [4]
    • You should not include the seam allowances in your measurement since they have no impact on the size of the actual opening.
    • The tape measure will need to stand on its side as you work with it. Make sure that the tape follows the stitching line precisely.
  3. Locate the stitching line on the back pattern piece. Place the starting end of the tape measure at the top of the Armhole stitching line, then wind it down the curve until it reaches the bottom.
    • As with the front pattern piece, you should not include the seam allowances in your measurement. Doing so would skew the results.
  4. Add the front Armhole measurement to the back Armhole measurement. The sum of the two will indicate the dimensions of the total Armhole measurement.
    • The back Armhole measurement might be larger than the front Armhole measurement by 1/2 inch to 5/8 inch (1.25 to 1.6 cm). If the measurements are off by more than this amount, however, the balance is off.
    • Also note that the back Armhole measurement should not be smaller than the front Armhole.
  5. The total Armhole measurement should be altered as needed to allow for ease of movement in the final piece.
    • The material can make a difference. If you're working with a pattern drafted to woven fabrics but choose to work with a knit fabric, shorten the ease by 1/2 inch (1.25 cm). If you are working with a knit pattern but want to convert it for use with woven fabrics, lengthen the ease by 1/2 inch (1.25 cm).
    • If you took your Armhole measurement and added some slack into the measurement already, you do not need to add in extra ease here.
  6. If the Armhole on the pattern is too large or too small, you may need to adjust it before cutting and sewing your material.
    • The simplest way to do this is to make the curve of the Armhole deeper or more shallow. The curve should be deeper if you need the Armhole to be bigger. It should be more shallow if you need the hole to be smaller.
    • Do not alter the shoulder or side seams to change the Armhole measurement.
    • Keep in mind that no matter what you do, the base of the Armhole from the front pattern piece must meet with the base of the Armhole from the back pattern piece. The same applies to the top points of the Armhole.
    • When you alter the Armhole size of a pattern, you will also need to alter the shoulder opening of any sleeve you plan to attach so that the two measurements will match.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you measure mid-arm circumference?
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Expert Answer
    Take the measurement from under the armpit to the elbow. The middle will be the thickest part of the arm, and according to the size that part comes out to, you can adjust the circumference of the sleeve.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
  • Question
    Should I measure along curve of armpit shirt hole?
    Community Answer
    Yes you should. Otherwise you get a piece of flabby materiel under your arm.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 6
  • Question
    How do you measure arm hole?
    Drew Hawkins1
    Community Answer
    You can measure your arm to find your arm hole measurements. Raise your arm and hold it parallel to the floor. Either arm is fine, though it will be easiest to do your measuring with your dominant arm and use your non-dominant arm for reference. Place the “0” mark against the bony part of your shoulder joint, right where your arm meets your torso. This will serve as the starting point for your measurement. Use the pad of your thumb or forefinger to pin the end of the tape in place. Draw the tape down the front of your shoulder and under your armpit and wrap it all the way around to the original starting point. That's your measurement!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Measuring tape
      • Mirror (optional)
      • Tailored shirt (optional)
      • Shirt pattern (optional)

      You Might Also Like

      A Simple Guide to Threading a Needle and Tying a Knot
      How to
      Take Your Shoulder Measurements (With or Without Help)
      How to
      Make Your Own Sewing Patterns
      How to
      Measure Arm Length
      How to
      Sew Straight by Hand
      How to
      Hand Sew Leather
      How to
      Sew Using Patterns
      How to
      Attach Sew-On Snaps to Your Latest Sewing Project
      How to
      Read a Sewing Pattern
      How to
      Line a Skirt
      How to
      Sew Canvas
      2 Ways to Stitch Corners: Boxed and Mitered Techniques
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=YnGJiHWQ-oM
      2. ↑ https://www.youtube.com/watch?v=ixRDc0AIIzQ
      3. ↑ Alessio Iadicicco. Apparel Manufacturing Specialist. Expert Interview. 20 May 2021.
      4. ↑ https://www.youtube.com/watch?v=ixRDc0AIIzQ

      About This Article

      Article Summary X

      Measuring your arm hole size is important if you’re tailoring a garment to your figure, and all you need to get started is a shirt that fits well and a tape measure. First, flatten out the shirt so there are no folds or creases on the arms. Position the tape at the top of the arm, keeping it on its side and as close to the seam as you can. Then, stretch the tape to the bottom of the arm, and take note of the measurement. Flip your shirt over and repeat the process on the back, since your back arm hole depth can sometimes be different. To get your total arm hole measurement, add the 2 results together. For tips on how to measure a patterned arm hole, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 282,624 times.

      Reader Success Stories

      • Yetunde Samuel-Samuel

        Feb 15, 2022

        "This is very helpful. Thanks for taking out time to provide this info. Much love."
      Share your story

      Did this article help you?

      Advertisement