How to Mix Grout

Co-authored by Ryaan Tuttle

Last Updated: October 19, 2023 Approved

In addition to being aesthetically appealing, grout keeps materials in place and protects them from damage. Mixing grout is quick and easy, although smaller batches are best so you can apply them before the grout dries. If you haven't thought about which grout to use for your project, spend some time considering your options, as the wrong grout can lead to crumbling, poor protection, or discoloration.

Things You Should Know

To mix grout, you'll need an empty bucket, a container of water, a sponge, and a trowel .
Adding a polymer grout additive to your grout (if it doesn't already include one) will increase your grout's durability.
Before using mixed grout, let it "slake" for 5-10 minutes so it strengthens.

Part 1

Part 1 of 2:

Choosing the Grout

Download Article

1
Use sanded grout for wider grout lines. Sanded grout has been mixed with fine sand, which helps keep it in place across the entire joint instead of shrinking. Choose sanded grout when filling gaps ⅛ inch (3.2 millimeters) or wider. ^{[1]
X
Research source}
- Sanded grout is not ideal for narrow lines, as the sand can take up too much of the width and weaken the structure. ^{[2]
  X
  Research source}
2
Use non-sanded grout for narrow lines. Non-sanded grout, also called "unsanded" or "wall grout," is typically recommended for lines under ⅛" (3.2 mm) wide, but some prefer to reserve non-sanded grout for lines ¹ / ₁₆ " (1.6 mm) or smaller. Non-sanded grout will shrink significantly as it dries, but the more narrow the line, the less noticeable this is.
- This grout is also stickier and easier to work with than sanded grout, especially on vertical surfaces. ^{[3]
  X
  Research source}
Advertisement
3
Be cautious when treating polished stone. If you are applying the grout to polished stone, test sanded grout on an inconspicuous corner first to check for scratching from sand particles. If the stone does end up scratched, use non-sanded grout instead. If the grout joints are considerably larger than ⅛" (3.2 mm) wide, consider epoxy grout instead.
- Highly reflective polished stone is more likely to be scratched than honed stone, with a matte appearance.
4
Use epoxy grout only for high-risk areas. Epoxy grout resists grease, acid, and wear much better than ordinary grout, and can substitute for either sanded or unsanded grout. ^{[4]
X
Research source} It provides serious protection for kitchen countertops or other areas with high spill risk, but dries much faster and is much harder to apply than other forms of grout. ^{[5]
X
Research source} It also tends to be considerably more expensive. It’s usually only needed in commercial kitchens, such as the ones in restaurants.
- Epoxy grout can discolor some porous, unglazed, stone materials. Seal the stone first before you apply the epoxy grout. ^{[6]
  X
  Research source}
5
Use caulk to join surfaces at an angle. Caulk creates a more flexible seal. ^{[7]
X
Research source} Use it instead of grout when filling the gap between a wall and a floor, or another joint between two different planes.
- If you’re concerned about matching throughout, you can also purchase either sanded or unsanded grout caulk, which is a mixture of the two.
6
Choose a color. The safest choice is an unobtrusive grout that matches the material you'll be joining, but you can try for a striking contrast if you're certain you like the look. Because white grout turns dirty yellow or off-white over time, light grey or light brown are generally better options, especially in humid or wet environments. If you do not plan on sealing your grout, a darker grout may be a better option.
- Dust from black, green, and red grout tends to be more difficult to clean off surrounding materials, so make sure to wipe the excess grout away thoroughly if you choose one of these colors.

Part 2

Part 2 of 2:

Mixing the Grout

Download Article

A polymer grout additive increases the grout's durability, but read the grout's label first, as it may already contain an additive. If it does not, you may purchase an additive and follow the instructions on its label while mixing, replacing some or all of the water as directed. Otherwise, the process is the same as described below.
Epoxy grout products typically consist of two or three components, and the mixing proportions between these vary depending on the brand. For more traditional grout products, the steps below should work, but check the label first in case of unusual instructions.
You'll need an empty bucket, a container of water, and a sponge. Find a pointer trowel, margin trowel, or a mixer paddle drill bit to use to mix the grout and apply it. Finally, pull on a pair of gloves.
Measure out all of the grout powder required for the quantity of grout you’re producing and pour it into the bucket.
5
Add ¾ of the total water needed. Check the grout label to find out how much water you need for the amount of space you'll be covering. Pour ¾ of the amount of water required in with the grout powder.
- If you have a large area to cover, consider mixing half the grout at a time, so the grout in the bucket doesn't dry out before you're done.
6
Mix the grout with a trowel. Use your trowel to mix the powder into the water, until you've made a thick paste with no dry lumps. Tilt the bucket toward you slightly, rolling it on its edge as you scrape off any dry grout from the sides. ^{[8]
X
Research source}
- If you have a mixing drill and attached grout paddle, you can use that instead. Stay below 150 rpm to avoid weakening the grout with excess air bubbles.
7
Squeeze in more water with the sponge. Add water one squeeze at a time from a sponge, mixing it thoroughly into the grout. Aim for a smooth "peanut butter" consistency, with no lumps.
- If the grout gets watery, pour in a little bit more powder.
8
Leave the grout alone for 5–10 minutes. ^{[9]
X
Expert Source

Ryaan Tuttle
Home Improvement Specialist

Expert Interview. 13 January 2021.} Allow the grout to "slake," or strengthen through chemical reactions. ^{[10]
X
Research source}
- Leave your trowel on newspaper or other surface to prevent a mess.
9
Remix and apply. ^{[11]
X
Expert Source

Ryaan Tuttle
Home Improvement Specialist

Expert Interview. 13 January 2021.} Briefly mix together the grout again, as it will become slightly stiff during slaking. Use immediately, as most grout sets within 30–60 minutes.
- If the grout has already hardened, you'll need to discard it and make a new batch. Adding more water after slaking will not be effective.

Expert Q&A

Search

Add New Question

Question

Do I have to wait after mixing the grout before applying it?

Ryaan Tuttle
Home Improvement Specialist
Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.

Ryaan Tuttle

Home Improvement Specialist

Expert Answer

Yes, you need to let it sit for a few minutes. You don't want to immediately apply the grout since there's a chemical reaction that needs to occur after you mix it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 1
Question

How do I apply the grout after mixing it?

Ryaan Tuttle
Home Improvement Specialist
Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.

Ryaan Tuttle

Home Improvement Specialist

Expert Answer

You need a grout float to apply it. Then, wait 20-30 minutes and wipe it down with a damp, not wet, sponge. Make sure the sponge isn't wet or it can weaken the grout.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1
Question

How long does the grout need to dry before you use the sponge to clean off the excess?

Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.

Mark Spelman

Construction Professional

Expert Answer

Wait approximately 5-10 minutes after application before you clean off the excess. Begin by wiping gently while holding the sponge at an angle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 14

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Always save some powdered grout in case you need to add more to the mixture later, or in the event that you need to make another batch.

Thanks
Helpful 10 Not Helpful 6
When filling narrow or smaller crevices or spaces with grout, you can use less powdered grout for a softer mixture. For larger areas, make the grout firmer by using more of the powdered grout during preparation.

Thanks
Helpful 11 Not Helpful 16

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Do not try to use grout that begins to harden in the bucket or container. It will not set properly. Discard it and mix a new batch.

Thanks
Helpful 19 Not Helpful 8
Do not mix more grout than you can use within 30 minutes. When mixed grout is left in the container for long periods of time, it will harden and will not be usable.

Thanks
Helpful 19 Not Helpful 10
Grout should never have a runny or soupy consistency. If it does, it will not set up properly and will not be secure. It will also crumble easily when dried.

Thanks
Helpful 17 Not Helpful 12
Be sure to wear gloves. Because of the lime that it contains, grout is very abrasive to all skin types.

Thanks
Helpful 0 Not Helpful 3

Things You'll Need

Grout powder
Water
Trowel
Bucket
Sponge
Mixing drill with grout paddle (optional)
Gloves
Grout float

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

Expert Source

Ryaan Tuttle
Home Improvement Specialist

[10]

[11]

Log in

How to Mix Grout

Things You Should Know

Steps

Choosing the Grout

Mixing the Grout

Expert Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories