How to Sand Blast

Sandblasting is a great way to remove rust or paint from a material. By using an abrasive medium and pressurized air, a sandblaster quickly cleans a surface and leaves it like new. Before beginning, you need to make sure you pick up the right abrasive material and know how to safely use a blaster.

Part 1

Part 1 of 3:

Abrasive Options

Download Article

1
Opt for mineral sand to remove rust and paint. Mineral sands are composed of materials like olivine and staurolite and should be used on thick metal pieces with rust. This abrasive works quickly and can also be used to remove weathered coatings and scale.
- Silica sand is not commonly used due to the possibility of developing silicosis, a lung disease caused by inhalation of the silica dust.
- Sand creates friction as it is released from the blaster and generates heat. If you have a delicate or heat-sensitive material, it may deform.
- Sand can be reused if it’s collected, but some of the sand will blow away if working outdoors.
2
Use plastic or a soda abrasive around sensitive areas. For areas that are made of plastic or have electrical components, use a light abrasive. While these media work slower, they are more gentle to the material and will not damage the surface.
- Plastic beads are reusable if you use them in a blast cabinet.
Advertisement
3
Pick glass beads for a smooth finish. Glass beads are a harder material used to remove rust from metal without roughening the surface underneath. Use glass for cosmetic materials, like a car or tiling. ^{[1]
X
Research source}
- Glass beads are a great choice for polishing metal, like cast iron, stainless steel, and aluminum.
- Glass beads can be reused if they’re collected or used in a cabinet blaster.
4
Blast with walnut for an environmentally friendly alternative. Walnut is a gentle blast material that works for removing paint from any surface, but it will not be strong enough to remove rust. Use walnut to polish and clean surfaces without leaving any patterning on the surface.
- Walnut can only be used once since the shells break apart upon impact.

Part 2

Part 2 of 3:

Equipment Selection

Download Article

1
Use a cabinet blaster for smaller jobs. Cabinet blasters are small, enclosed sandblasters that have gloves and a nozzle built in. The top of a cabinet blaster has a window so you can see what you’re working on. ^{[2]
X
Research source}
- A cabinet blaster is perfect for smaller components or materials that you have removed from a larger piece.
If you’re working outdoors or on a piece of material that is too large to fit into a cabinet blaster, use a portable pressure blaster. This can be moved or maintained in any location for an easier, on-the-go sandblasting treatment.
3
Use a compressor with a minimum of 80 PSI at 5 cubic feet per minute (CFM). A consistent pressure is needed for you to use a sandblaster properly. If it is too strong, it could damage your material, but if it’s too weak, it won’t work efficiently. Check the specifications of the compressor before you choose which one to rent or buy. ^{[3]
X
Research source}
- The PSI you need will depend on what material you’re blasting. Start on a low setting and increase the pressure slowly until it fits your needs. Look up the material you’re blasting to determine what PSI you should be using.
- The size of your air compressor will depend on the size of the job you have. For larger projects, use a large industrial-sized compressor. For smaller jobs, a consumer grade air compressor will do.
4
Pick the right nozzle for the job. Depending on the job, you may select a different shaped nozzle. As a rule of thumb, select a nozzle that has a narrow opening that is about ³ ⁄ ₈ inch (9.5 mm) to have the most concentrated stream of abrasive. As abrasive passes through the nozzle, the interior walls of the nozzle will start to wear away.
- Select a straight bore nozzle for a concentrated stream of abrasive.
- A Venturi nozzle will spread out the abrasive more, but it will give a more uniform particle distribution.
5
Select a shorter hose to maximize the amount of pressure. Keep your compressor and your sandblaster near one another so the air doesn’t have to travel far. As air travels further away from the compressor, it will start to lose pressure.
- A wider interior diameter of the hose will reduce the friction of the abrasive inside.
6
Put on eye and ear protection, gloves, and a respirator. Since you’re working with small abrasives, it’s very easy for stray particles to blow back at you. Wear protection that covers your eyes, mouth, and nose to prevent inhalation or eye damage. ^{[4]
X
Research source}
- The abrasive comes out of the hose at high speed. Avoid pointing the nozzle at anyone or any part of your body. Wear long sleeves and pants to lower the amount of exposed skin.
- Wear coveralls to keep dust off of your clothes.
- Compressors are very loud and blasting abrasive only increases the volume. Wear earplugs or earmuffs to prevent hearing loss.
- Cabinet blasters have built-in gloves, but you should still wear eye and ear protection as well as a respirator.

Part 3

Part 3 of 3:

Using a Pressure Blaster

Download Article

1
Lay down a tarp in an open space to collect your blasting media. Work in an open space clear from other people and materials. Make sure the tarp covers the full area you intend to blast. This catches your abrasive so it doesn’t spread too far and so you can reuse the material. ^{[5]
X
Research source}
- Confined spaces will grow thick with dust if the area is not properly ventilated.
- If you’re using a cabinet blaster, you do not need to lay out a tarp. The blasting material will stay inside the cabinet and be recycled.
2
Add the blasting medium into the hopper. Tear off a corner from the bag of your abrasive. Either use a hand scoop or pour the medium directly from the bag into the hopper. Fill the hopper to the top with the abrasive. ^{[6]
X
Research source}
- Use a funnel to avoid spilling any medium.
3
Attach a hose from the compressor to the hopper. There will be a port on the back or side of the hopper to attach a hose. Make sure the hose is securely attached to the hopper and the compressor. ^{[7]
X
Research source}
- The compressor provides pressurized air to the hopper and will propel the abrasive material at high speeds.
4
Turn on the compressor and test the blaster on a scrap piece of material. Lay the scrap piece of material on the ground. Make sure it’s the same material you plan on blasting. Use short bursts of spray on the material to see if it causes any damage. If your PSI is too high, it may cause warping to the surface. ^{[8]
X
Research source}
- This can also be done on an inconspicuous section of the larger material.
- Place the material inside of a cabinet blaster before securing it closed. Place your hands in the gloves and grab the built-in nozzle to spray the material.
If the nozzle is too close, the material will be damaged or warped. If the nozzle is too far away, the abrasive will spread out and be ineffective in removal. ^{[9]
X
Research source}
Overlap your strokes in the area you’re blasting so you remove all of the residue. Don’t focus on a specific area. Instead, move around the material evenly and revisit spots that may be more difficult. ^{[10]
X
Research source}

Expert Q&A

Search

Add New Question

Question

Are there any other types of sandblasters?

Evan Ernst
Classic Automotive Enthusiast
Evan Ernst is a Classic Automotive Enthusiast based in Spokane, Washington. Evan and his twin brother Nick are the founders of ClassicNation, an automotive enthusiast website. With over 36,000 YouTube subscribers, Evan and Nick share videos covering one of their many classic car restoration projects, an interesting 'featured ride', or helpful how-to repair videos.

Evan Ernst

Classic Automotive Enthusiast

Expert Answer

There are a couple of variations of sandblasters. Sandblasting cabinets provide a self-contained environment, ideal for smaller parts. Users insert their arms through rubber gloves, allowing them to sandblast relatively small machine parts in a confined space. On the other hand, a dustless blast system resembles a wheeled air compressor, designed for use in larger outdoor spaces. This system is suitable for bigger components like chassis or body panels and is often used for heavy-duty rust or corrosion removal. It utilizes a separate medium, such as sand or synthetic beads, in a process known as media blasting. While the process remains similar, the choice between these two distinct styles depends on the size and nature of the components you're cleaning with the sandblaster.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Let your neighbors know beforehand if you are sandblasting in a residential neighborhood. The process is loud and messy.

Thanks
Helpful 0 Not Helpful 0
Contact a commercial company to see if they have an area that you can use to sandblast or if they can help you.

Thanks
Helpful 0 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Wear safety glasses, earplugs, gloves, and a respirator to protect yourself while you sandblast. Wear long pants and long sleeves to prevent skin exposure.

Thanks
Helpful 3 Not Helpful 0
The abrasive stream can cause physical damage and tear open skin.

Thanks
Helpful 0 Not Helpful 0

Things You’ll Need

Gloves
Respirator
Earplugs
Eye protection
Tarp
Air compressor
Blasting medium
Hopper

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

Log in

How to Sand Blast

Steps

Abrasive Options

Equipment Selection

Using a Pressure Blaster

Expert Q&A

Tips

Warnings

Things You’ll Need

You Might Also Like

Expert Interview

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories