PDF download Download Article PDF download Download Article

If you've noticed your towels getting a little grungy—even after washing them—it might be time to try stripping them instead! Stripping towels is a great way to remove built-up minerals and residue from past washing and grime that sticks to the towel fibers during each use. Keep reading for a complete, step-by-step guide on how to strip towels and keep them feeling soft and fluffy for a long time.

1

Wash your towels normally.

PDF download Download Article
  1. If your towels are dirty, make sure to run them through the washing machine just like you usually would before you get started stripping them. You can also run them through the dryer if you want, but it's unnecessary. Towels don't have to be dry (since you'll be getting them wet anyway), but they do have to be as clean as possible! [1]
  2. Advertisement
2

Separate white towels from the dark ones.

PDF download Download Article
  1. While stripping doesn't include bleach and works for any color towel, it's best to group whites and dark colors together like normal laundry, to prevent white towels from getting colored. Ensure your tub isn't too full of towels, either—there should be enough room for water to move between and around each item in the load. [2]
    • If you want to strip a large pile of towels, complete multiple loads instead of overcrowding the tub.
    • Strip towels separately from sheets since they have such different textures. A towel should be stripped with items of the same texture, including other towels, washcloths, and hand towels.
3

Fill your bathtub with hot water.

PDF download Download Article
  1. Check the towels' tags if you're unsure how much heat they can withstand, and then turn on the heated water. [3] Keep it running until you've got roughly the same amount of water you'd use for a bath—a full tub, but not spilling over the sides.
  2. Advertisement
4

Add borax, washing soda, and detergent to the hot water.

PDF download Download Article
  1. You’ll need ¼ cup (55 grams) of borax , ¼ cup (55 grams) of washing soda , and ½ cup (110 grams) of powder laundry detergent . Pour the chemicals into the tub, then stir the water with a long tool; a broom handle, stick, large spoon, or pole would all work. [4]
    • Most people strip towels in their bathtub, but you can also use a large bucket to do the job if you don't have a tub.
    • Keep stirring and check the water to ensure that the powders fully dissolve before moving to the next step.
5

Submerge your towels in the water.

PDF download Download Article
  1. Make sure each towel you strip is completely underwater and soaked through. [5] Don't worry if you see some foaming when you submerge the towels or notice the water change color, either; both are totally normal parts of the stripping process!
  2. Advertisement
6

Let the towels soak for 5 hours.

PDF download Download Article
  1. Set a timer for 5 hours, and then go about your day! [6] While waiting, you don't have to monitor the towels—stripping will happen naturally. Return once per hour to stir the towels gently but let them sit in the water otherwise. Then, after 5 hours, remove the towels and drain your tub of water.
    • Stirring helps the washing soda and detergent get into each towel's fibers and strip away lingering buildup and residue.
7

Run the towels through a water-only rinse cycle.

PDF download Download Article
  1. You don't need to add any detergent or other cleaning supplies to the washing machine; just place the towels inside and set the machine to a rinse cycle. This way, dislodged residue will be washed away instead of spreading to the rest of your laundry. [7]
    • If your washing machine has a double-rinse cycle, select that option instead to ensure a thorough cleaning.
  2. Advertisement
8

Tumble-dry the towels.

PDF download Download Article
  1. Your towels have already been cleaned and stripped of unwanted odors, so dryer sheets aren't necessary. Set your dryer to whichever cycle or setting you normally use for towels, and dry them off completely. [8]
9

Repeat the process if your towels are still dirty.

PDF download Download Article
  1. Don't fret if they still seem a bit off-color or smelly; you can easily strip them again right away without damaging them. Keep stripping your towels with borax, washing soda, and detergent (the same way each time) until they're fresh and clean. [9]
    • Keep in mind that towels become hard and stiff if you use too much laundry detergent. So cut back on the detergent to have soft and fluffy towels. [10]
    • You can add vinegar in the wash cycle to remove all the residue from the towels. [11]
    • Do not overfill the washer so the towels can move freely. [12]
  2. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • If your towels smell musty, feel stiff, or look off-color and grimy, they will benefit from a good stripping. [13]
      • Residue from old detergent and fabric softener, hard water minerals, and natural body oils get embedded in towel fibers over time. Stripping helps get rid of that stuff!
      • Prevent future residue and mineral buildup by adding a small amount of borax or washing soda to your normal laundry. Check their labels first, as the amount needed will vary based on your mashing machine.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 38,094 times.

      Did this article help you?

      Advertisement