Wireless security is very important these days. You don't want anyone siphoning bandwidth or getting into your network to perform malicious attacks. Since every wireless router is different, this article will discuss the basics and use one of the most popular wireless routers, the Linksys WAP54G as an example. The steps for your router may differ. This guide assumes you are connected to your router (either through a network cable or over its wireless signal) using DHCP correctly.

Steps

  1. To find this:
    • Go to Start > run, and type cmd
    • Type ipconfig and press enter. It will list the default gateway here. [1] Once you have your default gateway address, open your web browser and type it in the URL bar.
    • Default for Linksys products is usually username: (blank) password: admin
    • Default for Netgear routers is Username: admin password: password
    • Default for Dlink routers is Username: Admin; Password: (blank).
    • Default for Siemens routers is Username: Admin; Password: admin (all lowercase).
    • Default for zyxel-p600-t1a is 1234
    • Default User Names and Passwords can be found sometimes on the bottom of the router, on the label or using Google.
    • If you are having trouble finding the UN and PW then try http://www.portforward.com this website is usually used for opening ports for P2P programs and games,but when it shows you how to open your ports it tells you the default UN and PW for the router. The router list is extensive.
    Advertisement
  2. From the Router's user interface you will probably have a setting to log Users going through the router--enable it if not already. [2]
  3. Get a pen and paper, and use the steps shown above finding the default gateway to find your MAC or also called physical address of all computers/devices that use wifi/wireless in your home or that will be using it and write them down. From time to time check the log to see if any unknown addresses show up. If so, then someone is leeching off your internet. MAC/physical addresses are unique hexadecimal code that identifies each Network card inside every PC that uses Ethernet. No two MAC addresses are the same.
    Advertisement
Method 1
Method 1 of 2:

Finding who is on your network

  1. If it isn't enabled, enable it.
  2. This list will tell you the computer name of everyone connected to your network on DHCP (DHCP automatically configures a computer's IP and DNS settings. This only works if everyone connected uses DHCP. If someone connects and uses their own static address, then this will not show them.)
    Advertisement
Method 2
Method 2 of 2:

Other Ways to Find who is on your network

  1. If you notice an unknown device, use mac ban to block it.
    Advertisement


Community Q&A

Search
Add New Question
  • Question
    How can I receive a network Wi-Fi password on an iPhone?
    Community Answer
    The only way to receive one would be if someone tells you what it is, since even if your phone has the password, you won't be able to see what it is.
Ask a Question

      Advertisement

      Video

      Tips

      • Turn off your wifi router when not using it.
      • If you want to deal with assigning your own IP address, disable the DHCP server on your router. You will have to assign your own internal IP address, but it will keep some people out that do not know your subnet (or how to find it).
      • Installing a firewall will HELP prevent cracking of your computer
      Show More Tips
      Advertisement

      Warnings

      Advertisement

      About this article

      Thanks to all authors for creating a page that has been read 1,605,300 times.

      Reader Success Stories

      • Anonymous

        Oct 24, 2017

        "Learning about encryption and that it keeps someone from using my WiFi helped."

      Is this article up to date?

      Advertisement