How to Wet Sand a Car

PDF download Download Article
PDF download Download Article

Wet sanding can be used on new paint to provide an even finish and remove what is commonly referred to as the “orange peel” effect, where the paint appears to have the texture of an orange skin. On existing paint, it can be used to remove scuffs or shallow scratches or restore the luster of the paint. Wet sanding can cause damage to the paint of the vehicle if not done correctly, so take your time as you progress through the process.

Part 1
Part 1 of 3:

Preparing to Wet Sand

PDF download Download Article
  1. Wet sanding can be an excellent way to restore your paint to its original luster, but it isn't always the best option. Deep scratches that reach the metal, for instance, often cannot be repaired through wet sanding alone. If the clear coat on the paint has scuffing and scratches, however, wet sanding may be the right solution for you. [1]
    • Scratches that are deep enough to expose metal cannot be resolved through wet sanding alone.
    • Wet sanding primarily repairs damage to the top layers of paint and clear coat.
  2. The damage that you are trying to repair will dictate how much sanding will be required, and with what type of paper. Significant clear coat damage will require multiple steps, but light scuffing can be resolved in one stage. [2]
    • If the damage to the paint is light, skip the 1200 or 1500 grit sandpaper and begin with 2000 or 3000 grit paper instead.
    • If you are wet sanding a newly painted surface, you can also jump directly to the 2000 or 3000 grit paper.
    Advertisement
  3. When repairing worn, scuffed or scratched paint, begin with a 1200 or 1500 grit sandpaper. You can purchase sandpaper at your local hardware store, large retail store, or auto parts store. [3]
    • Any less than 1200 grit sandpaper may produce scratches that are difficult to buff out.
    • The higher the grit number on the sandpaper, the finer the abrasive surface.
  4. Wet sanding requires a lubricant to prevent the sandpaper from burning the paint. Fill a regular bucket with water and a small amount of automotive soap. Do not use an automotive soap that also serves as a wax or a polish. [4]
    • You may also use dish soap for this application.
  5. Remove the sandpaper from its package and hold it like a sheet of paper, so the longer edges are on the right and left. Use a pair of heavy duty scissors to cut the sandpaper sheets lengthwise to double the number of sheets you have. [5]
    • The width of the cut sheets will wrap around most sand paper squeegees and handles better.
    • The strips need to be long rather than wide in order to dip half of them in water.
  6. Place the sandpaper sheets along the edge of the bucket so half of each sheet is soaking in the soapy water. Leave them to soak for five minutes or so. [6]
    • The halves that are soaking in the water should be completely saturated with soapy water before moving on.
    • The dry portion will allow you to attach the sandpaper securely to your tool of choice.
    7. Advertisement
Part 2
Part 2 of 3:

Wet Sanding the Vehicle

PDF download Download Article
  1. Before you begin wet sanding, be sure you remove any debris or film from the area you will be working on. Use a regular automotive soap and a sponge to wash it, then rinse it thoroughly with a hose. [7]
    • Do not use an automotive soap that is also a polish or a wax.
    • You will not need to wait for the area to dry to move on.
  2. Do not simply use your hands when wet sanding. The gaps between your fingers will create an uneven sanding surface, resulting in an inconsistent finish. Instead, wrap the sandpaper around a pad, handle or sandpaper squeegee based on your preference. [8]
    • Depending on the area you are wet sanding, there are flat, curved, and bendable handles you can choose from.
    • Read the instructions on the tool you opt to purchase to see how to secure the paper to it.
    • You can buy sanding tools at most hardware and auto parts stores.
  3. With the sandpaper thoroughly soaked, begin sanding the area with small circular motions and a light amount of pressure. If your sanding does not seem to be affecting the clear coat, apply a little more pressure so it will. Do not press hard enough to create scratches in the paint itself. [9]
    • It may take a little practice to determine just how much pressure you need to apply to the sandpaper.
    • Ease off of the sandpaper if it appears to be penetrating beyond the clear coat or damaging the paint.
  4. Switch the direction of your circular motions from time to time or approach the area from a different angle. This will ensure you sand the entire surface evenly. [10]
    • Uneven sanding can be difficult to identify while you work, but may be apparent in the final product.
    • Be careful not to increase pressure when changing angles or directions.
    • The color in the paint should bleed into the water and tint it slightly. If the water gets any darker, you are sanding too hard.
  5. Do not allow the sandpaper to become dry while wet sanding. Keep the area heavily saturated with soapy water throughout the process by dipping the sandpaper in the bucket often and even pouring some of the soapy water on the vehicle. [11]
    • As the sandpaper gets dry, it will produce heat which can burn the paint.
    • If you burn the paint, you may need to have that component of the body repainted.
    • Swap sheets of sandpaper out for new soaked ones as they sandpaper becomes worn out or too soggy to use.
  6. As you sand, you will likely feel a fair amount of fatigue in your hands and arms. When you get tired, you increase the chances that you will accidentally use the edge of the tool as opposed to keeping it flat on the vehicle. [12]
    • Take frequent breaks to combat fatigue.
    • Be careful not to scratch the paint with the handle of the tool or one of the edges the sandpaper is wrapped around.
    7. Advertisement
Part 3
Part 3 of 3:

Treating the Sanded Area

PDF download Download Article
  1. Once you have completely wet sanded the area with your 1200 or 1500 grit sandpaper, repeat the process with 2000 or 3000 grit paper. This will remove any shallow scratches or abrasions left by the first stage of wet sanding. [13]
    • If the damage you are trying to repair is light, you can do only this step.
    • Remember to keep the area completely wet as you sand with this paper.
  2. Once you have completed the wet sanding, use a hose to rinse off any soap or debris left on the vehicle. Be sure you rinse it thoroughly because you will need to apply a glaze or wax to the area once it dries. [14]
    • Touch the area with your hand to ensure there is no soapy residue left behind.
  3. The wet sanded area will need to be completely dry in order to buff properly. Do not allow the area to sit in direct sunlight, as it may damage or fade the paint. Instead, leave it to dry for a few hours in a shady area. [15]
    • You can use a towel to dry the area, but allow any remaining moisture to air dry completely before moving forward.
    • You may use a hair dryer or other heat source to expedite the drying.
  4. Once the wet sanded area is completely dry, apply some rubbing compound to a buffer pad and use a power buffer to polish the area . Use a medium speed and a light amount of pressure when buffing the rubbing compound into the paint. [16]
    • With the buffer running, rotate it in circles as it spins.
    • Applying too much pressure can burn the paint, so start light and apply more pressure if need be to rub in the compound.
  5. Once the area has been buffed, it should look like the finished product. Use a high quality automotive wax on the area to provide an additional layer or protection. Wet sanding can make that area of the paint slightly more shallow than the rest of the vehicle, so a layer of wax can help prevent it from fading at a different rate than the rest of the paint. [17]
    • You may want to wash and wax the entire vehicle to ensure no dust or debris from the wet sanding remains on the vehicle when you're done.
    • Waxing the car will protect the paint and create a more brilliant shine.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How long do you need to wait for the paint to dry before wet sanding?
    Angel Ricardo
    Auto Technician
    Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills.
    Angel Ricardo
    Auto Technician
    Expert Answer
    It really varies by the type of paint and clear coat you're using. It just totally depends from paint job to paint job. I'd recommend reaching out to someone who paints cars for a living and asking them based on what products you're using.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 3
  • Question
    How do I wet sand a car using a palm sander?
    Uglymug18
    Community Answer
    You cannot use a palm sander to wet sand. The palm sander will leave swirl marks in the paint and clear coat. You must hand-sand using a block.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 27
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Wash Your Car by Hand Like a Pro
      Best Ways to Clean the Outside & Inside of Your Car
      How to
      Wax Your Car
      How to
      Check the Fluids in a Car
      How to
      Buff a Car
      How to
      Remove Scratches from a Car
      How to
      Fix Alloy Rim Scratches
      How to
      Use Household Ingredients to Clean Your Car
      How to
      Deodorize Your Vehicle with an Ozone Generator
      How to
      Polish a Car
      How to
      Use a Rubbing Compound
      How to
      Buff Clear Coat
      How to
      Clean Fuel Injectors
      The Best Ways to Clean the Inside of Your Windshield
      Advertisement

      References

      1. ↑ http://www.drbeasleys.com/blog/2014/03/21/wet-sanding/
      2. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      3. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      4. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      5. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      6. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      7. ↑ http://www.drbeasleys.com/blog/2014/03/21/wet-sanding/
      8. ↑ https://www.motortrend.com/how-to/hrdp-0805-color-sanding/
      9. ↑ https://www.motortrend.com/how-to/hrdp-0805-color-sanding/
      1. ↑ https://www.motortrend.com/how-to/hrdp-0805-color-sanding/
      2. ↑ https://www.motortrend.com/how-to/hrdp-0805-color-sanding/
      3. ↑ https://www.motortrend.com/how-to/hrdp-0805-color-sanding/
      4. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      5. ↑ http://www.drbeasleys.com/blog/2014/03/21/wet-sanding/
      6. ↑ http://www.drbeasleys.com/blog/2014/03/21/wet-sanding/
      7. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new
      8. ↑ https://axleaddict.com/auto-repair/How-to-sand-and-polish-a-car-making-the-paint-look-brand-new

      About This Article

      Article Summary X

      To wet sand a car, soak 1200 or 1500 grit sandpaper in a mixture of water and automotive or dish soap for 5 minutes. Next, wrap the soaked sandpaper around a sanding squeegee or pad and sand gently in circular motions, switching directions occasionally to ensure you sand the surface evenly. Keep the sandpaper wet during the process, dipping back into the soapy water as often as necessary. Once you’ve wet sanded the entire area, switch to 2000 or 3000 grit sandpaper and repeat the process to remove any scratches left by the first stage. To learn how to buff and wax your car after wet sanding, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 319,629 times.

      Reader Success Stories

      • Ed Roberson

        Sep 22, 2020

        "I've done clear coat wet sanding lots of times but when you get old, it helps to go over it for a refresher. ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement