Making ornaments is a creative way to get into the festive, holiday spirit. They are both fun and easy to make, and the possibilities are endless. They will lend your tree a wonderful, old-timey feel. They also make great gifts and can become treasured keepsakes for years to come.

Method 1
Method 1 of 3:

Making a Honeycomb Ornament

  1. The circles can be any size you want, but something around 1½ to 2 inches (3.81 to 5.08 centimeters) would be ideal. Book pages, origami paper, tissue paper, and wrapping paper are all great options. Some scrapbooking paper may also work. Avoid using cardstock, as it is too thick. [1]
    • You can use the same color of paper for all of the circles, or experiment with using different colors. [2]
    • For a more interesting ornament, consider using double-sided paper.
  2. If you are using double-sided paper, make sure you are folding them all the same way. The pattern on side A should be on the inside, and the pattern on side B should be on the outside.
    Advertisement
  3. Make sure that the creases are all nestled inside each other. If you are using double-sided paper, make sure that the same design is facing upwards. [3]
    • If you are using two or more different colors, start with your first color, then stack the rest in groups of two. For example: Red, green, green, gold, gold, red. [4]
  4. If you don't have access to a sewing machine, you can tie thread around the middle, using the crease as a guide. Leave the tail ends long, as you will be using them to make the loop.
    • Consider using gold or silver thread for this. You will be using the tail ends to make a loop so that you can hang your ornament.
  5. The loop needs to be big enough to fit over a branch on your Christmas tree. You can also tie the tail ends around a small jump ring, then trim them off; make sure that the jump ring is flush with the top of the stack. This way, you can slip an ornament hook through the jump ring.
  6. Set the stack down on the table. Place a glue dot along the right edge of the circle, one-third of the way from the top. Place another glue dot one third from the bottom.
    • Use permanent glue dots; the stronger the hold, the better. [5]
    • If you don't have any glue dots, you can use a small dot of liquid glue. [6] Use paper clips to hold the paper together while the glue dries.
  7. Use the crease you made as a guide. Once you have the paper folded, run your finger along the edges to seal the glue dots.
  8. This time, place the glue dot right at the halfway point. It should be right between the first two glue dots.
  9. Alternate between using two glue dots and one glue dot. When you reach the end, flip the stack over, and do the other side.
  10. When you get to the end, seal the final two pieces of paper using one or two glue dots (depending which you are on). This pulls the paper into a sphere shape. You may have to slip your finger into the slots to help them open up. [7]
  11. If you added a jump ring, slip an ornament hook through the jump ring, then hang the ornament.
    Advertisement


Method 2
Method 2 of 3:

Making Paper Strip Ornament

  1. Use a pair of wire cutters to cut the wire. Pinch the end of your wire with a pair of round-nose pliers, then twist it until it forms a small loop. Pull the pliers out and set them aside. The loop will keep the bead from sliding off. [8]
  2. [9] You can leave the bead blank, or your can paint it first to match the color of your ornament. You can also use a glass or crystal bead for a fancier ornament instead. Set the wire with the bead on it aside when you are done.
  3. Cut your paper down to 4½ by 10½ inches (11.43 by 26.67 centimeters) first, then use a ruler and pencil to draw vertical lines, spaced ¾ inch (1.91 centimeters) apart. Cut your paper along the lines that you drew. You will need 6 strips. [10]
    • You can also use scrapbooking paper or construction paper.
  4. [11] Make sure that the hole is in the same spot on each strip of paper. A good way to do this would be to set the entire stack down on a piece of foam, then pierce the center and both of the narrow ends with a yarn needle or thumbtack.
    • If you don't have a yarn needle, you can use your wire instead. You will need to pierce the strips individually, however.
  5. Fan the strips out evenly, then place a drop of glue on top of the stack, right where the wire is. [12]
  6. Take the strip that is on the bottom of the stack, closest to the best. Thread the left end onto the wire, and then the right end. Secure the paper with a drop of glue. [13]
  7. Take the second strip of paper, and thread the left end and then the right end onto the wire. Work your way to the top, then seal the last strip with glue. [14]
  8. You can squish your papers down as much as you'd like. The more you squish them, the more oval your ornament will be. Use your round-nose pliers to make the loop, and your wire cutters to trim off any excess wire. [15]
  9. Tie the ends of the ribbon or twine to make a loop big enough to fit over a branch on your Christmas tree. When you are done, hang your ornament.
    • Alternatively, you can skip the ribbon/twine, and slip an ornament hook through the wire loop instead.
    Advertisement
Method 3
Method 3 of 3:

Making a Folded Circle Ornament

  1. You can make them all one color, or different colors. You can even use old Christmas cards. One of these circles will be your template. [16]
  2. Take one circle, and fold it in half both ways to make an X. Fold three edges towards the middle, each one overlapping the previous one, to make a triangle. Unfold your triangle, and cut off the flaps. Discard the cut-off flaps, and save the triangle. [17]
  3. Take your triangle, and set it down in the middle of your first circle, aligning the points with the edges. Fold the edges of the circle over the triangle, make a crease, then pull the triangle out. Do this for all 20 circles, and do not cut the flaps off. [18]
    • Once you have folded all 20 circles, you can discard the triangle.
  4. Take your first two pieces, and orient them so one is pointing up and the other is pointing down. Glue the flaps together. Glue the remaining 8 pieces in a similar manner to form a rope. [19]
    • If you don't have a hot glue gun, you can use regular glue instead, but you will need to use paper clips to hold the pieces together while they dry.
  5. Set the ring aside when you are done. This is the middle segment of your ornament.
  6. Arrange 5 pieces together to form a circle; make sure that they are all pointing upwards. Glue the flaps together, then set the top segment aside. Repeat this step one more time to make the bottom segment.
  7. Choose a ribbon that matches the colors of your ornament. Make sure that the loop is big enough to fit over a branch on your Christmas tree. [20]
  8. [21] Thread the loop onto a yarn needle, then push the needle up through the center of the top segment. Make sure that you are pushing the needle from the inside of the segment. Pull the yarn needle off the loop, and gently tug the loop until the knot is snug against the inside.
  9. Make sure that you align the flaps. Once the glue dries, your ornament is complete!
  10. Advertisement


Expert Q&A

Ask a Question

      Advertisement

      Tips

      Show More Tips
      Advertisement

      Things You'll Need

      Making a Honeycomb Bauble

      • Lightweight paper
      • Drinking glass
      • Pencil
      • Scissors
      • Thread
      • Sewing machine (highly recommended)
      • Glue dots
      • Hole puncher (optional)
      • Jump ring (optional)
      • Ornament hook (optional)

      Making Paper Strip Baubles

      • Colorful paper or cardstock
      • Ruler
      • Pencil
      • Scissors
      • 6 inches (15.25 centimeters) of thin wire
      • Wire cutters
      • Round-nose pliers
      • Wooden beads (2 per ornament)
      • Twine or ribbon

      Making a Folded Bauble

      • Cardstock
      • 2-inch (5.08-centimeter) hole punch
      • Hot glue gun
      • Hot glue sticks
      • Ribbon
      • Yarn needle
      • Scissors

      About this article

      Thanks to all authors for creating a page that has been read 26,433 times.

      Did this article help you?

      Advertisement