PDF download Download Article
Learn exactly what supplies to use to create your eco-friendly menstrual pads
PDF download Download Article

One of the things some people will go through a lot in their life is menstrual pads. They can get very expensive, and some people find them uncomfortable to wear. Fabric menstrual pads are not only more economical and environmentally-friendly, but they are also more comfortable to wear. Made from breathable cotton, they cause less sweating and odor than regular pads. They may also lower the risk of toxic shock syndrome. Best of all, they are easy to make! [1]

Part 1
Part 1 of 3:

Creating the Pad Base

PDF download Download Article
  1. Begin with a diamond shape that has rounded edges. It needs to be it about 9 inches (22.86 centimeters) high and 8 inches (20.32 centimeters) wide. Cut the template out when you are done.
    • Make the top and bottom corners a little wider. They should be about 2½ inches (6.35 centimeters) wide.
  2. This will be the exterior of your cloth pad, so choose something that you like. You can use patterned fabric or a solid color. You can even use a pattern for one side, and a solid color for the other.
    • You can also use cotton fabric instead of flannel. Check out the quilting and calico section of your local fabric store for lots of colorful options!
  3. Pin the two pieces together first, with the right sides facing in. Sew around the piece using a ¼-inch (0.64-centimeter) seam allowance. You do not need to leave a gap for turning because you will be cutting a slit into it.
  4. Make sure that you are only cutting through one layer of fabric, not both. Position the slit right in the middle. It only needs to be a few inches/centimeters tall.
    • Consider cutting notches into the curved corners of the pad. This will help reduce bulk.
  5. Use your fingers to push the corners of the pad through the slit that you cut. If the edges/corners didn't turn out all, push them out with a pencil or knitting needle.
    • Press the pad base with a hot iron using the cotton setting.
  6. You can use a matching thread color or a contrasting one. You can even use a zigzag stitch to make it look more interesting. Backstitch at the start and end of your sewing, then trim the excess threads of as close to the fabric as you can.
Part 2
Part 2 of 3:

Creating the Pad Liner

PDF download Download Article
  1. Begin with a vertical rectangle that has a rounded top and bottom. Make the rectangle about 8 inches (20.32 centimeters) high, and 2½ inches (6.5 centimeters) wide. Cut the template out when you are done.
  2. You will need 3 to 4 pieces of soft toweling. Use the template to trace two more pieces out of flannel; this time, add a ¼-inch (0.64-centimeter) seam allowance. The toweling will make the liner. The flannel will make the liner cover.
    • Match the flannel to the base pad.
  3. Use a â…› to ¼-inch (0.32 to 0.64-centimeter) seam allowance. Go around the edge of the piece using a zigzag stitch. Set the stack aside when you are done.
    • Do not include the two flannel pieces in this stack.
    • The color of the thread does not matter. You will be putting this inside the liner cover.
  4. Pin the flannel pieces together with the right sides facing in. Sew around them using a ¼-inch (0.64-centimeter) seam allowance. Do not leave a gap for turning. You will be cutting a slit into the piece instead.
  5. Use the same technique as you did for the pad base. This time, make the slit about 4 inches (10.16 centimeters) tall. This will give you enough space to tuck the towel lining instead.
    • Cut notches into curved edges of the pad. This will help reduce bulk.
  6. Simply slip the towel liner through the slit, and into the flannel cover. Smooth out any bumps or buckles.
Part 3
Part 3 of 3:

Putting Everything Together

PDF download Download Article
  1. Turn the pad base so that the longer axis is vertical, and the side with the slit is facing up. Place the pad liner on top, with the slit facing down. Make sure that it is centered and oriented vertically. Pin everything together when you are done.
  2. Sew around the pad liner, using a â…› to ¼-inch (0.32 to 0.64-centimeter) seam allowance. Backstitch at the start and end of your sewing, then snip the thread as close to the material as you can. Remove the pins as you sew.
    • You can use a matching or contrasting thread color for this.
  3. Make sure that you are sewing ½ inch (1.27 centimeters) away from the topstitch and not the edge of the liner. Use the same thread color as you did before. This will help secure the liner further to the base and prevent buckling.
  4. You can use sew-on snaps or the kind that you have to set with a tool. You can also use Velcro instead. Avoid using self-adhesive Velcro, however. While it is convenient to apply, it does not last very long, and it will eventually come off.
    • The wings will close on the outside of your underwear, so plan accordingly.
  5. Place the pad base flannel-side-down onto the seat of your underwear; make sure that the liner pad is facing up. Fold the wings under the seat of your underwear, then close the snaps. Depending on your flow, the liner should last 2 to 4 hours.
  6. Store the pad in a dry bag until you get home. Rinse it promptly with cold water, then wash it with hot water and detergent. Finish off with a final cold rinse, then dry them in the dryer.

Expert Q&A

Ask a Question

      Video

      Tips

      • Wash all of your fabric beforehand so that your pad does not shrink in the wash. [2]
      • Make sure that the material you use is 100% cotton. Synthetic materials do not breathe well, and can contribute to sweating and odors. [3]
      • Consider spending a little more on high-quality fabric. It will feel nicer and last longer than the cheap kind. [4]
      Show More Tips

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Avoid using fabric softener on cloth pads because it could cause skin irritation. Just use liquid detergent with no softener added to keep them clean.
      • Use vinegar in a pre-wash to set the dye into the fabric. This can help prevent irritation if you have chemical sensitivities to fabric dye.
      • If you use velcro, be sure to round off the edges to prevent chafing or scratching.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You'll Need

      • Cotton flannel
      • Cotton toweling
      • Fabric scissors
      • Sewing pins
      • Sewing machine
      • Thread
      • Cardstock
      • Pen


      About This Article

      Article Summary X

      To make your own reusable menstrual pads, start by cutting 2 round-edged diamonds out of cotton flannel and sewing them together. Cut a vertical slit in 1 layer of the fabric, turn the material inside out through the slit, and stitch around the top to form the pad base. Once you’ve stitched the base together, cut 4 pieces of pad liner out of soft toweling, and 2 more out of flannel. When you’ve cut them all out, stack the toweling pieces together. Then, stitch the flannel pieces together and stitch them up so you have 2 thick liners. Next, cut a slit in the flannel stack and turn it inside out, like you did for the base. After you’ve turned it inside out, tuck the the towel liner into the flannel one to finish your pad liner. Finish by stitching your liner to the base and adding Velcro to the wings to help secure it to your underwear. For more tips, including how to cut your material to the right dimensions, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 469,175 times.

      Reader Success Stories

      • Simona Simion

        Jun 1, 2019

        "Six months ago I was looking for something ecological and natural to use, since pads contain harsh chemicals. Since ..." more
        Rated this article:
      Share your story

      Did this article help you?