If the paint job on your concrete porch screams "ugly," you can hide it, or you can remove it. Because removal is difficult and time consuming, hiding it with fresh paint or another coating more to your liking is an alternative really worth considering. If you're determined, however, to get down to bare concrete, you can do it mechanically or chemically. Keep reading for detailed instructions.

Steps

  1. First assess whether your under-surface is poured concrete, mortared concrete block, or block with some kind of coating over it such as stucco. Poured concrete can stand up relatively well to mechanical cleaning methods such as sand blasting, pressure washing, or scraping. The aesthetic of poured concrete may be the look you're after, so read on.
  2. If you've got a mortared block or block with a coated or stuccoed surface, mechanical paint removal methods could seriously damage your walls, so are not recommended.
    Advertisement
  3. Paint showing poor adhesion can be scraped off by hand using a metal paint scraper and wire brush. Hand scraping and wire brushing is the safest way to go. If paint is loose, this method is easy but tedious. If you don't think you've got the patience, buy a dozen scrapers and wire brushes and invite a group of friends willing to pitch in for an all day porch scraping party. Have safety masks for everybody to avoid breathing any paint particles.
  4. If you don't have concerns about damaging your walls or concrete floor, old paint can be powered off with a pressure washer or sand blaster. If you don't already own a pressure washer or sand blaster, you can rent these from local tool rental stores or your nearest big box home supply store. [1] Start early and you should be able to complete a porch in one day. Carefully follow the directions that come with the power tool you've rented. Use eye protection and take care never to aim pressurized sand or water at your own feet, your pets, or anyone else. If you have neighbors located close to your porch, take into consideration that particles and overspray could drift their way. [2]
  5. Once you can see the underlying surface of your wall/floor, you can determine whether old paint failed due to some sealant or other priming issues on your concrete surface. More importantly, you can determine whether there has been water seepage or some other problem that damaged the old paint and should be corrected.
  6. If the area you're dealing with is not huge, and especially if the old paint is adhering well to the concrete, you may opt for chemical removal. Chemical cleaning may be your best option if the paint you're removing is not a full coat but only a paint spill or splatter spotting that hasn't come off when you scraped or wired brushed it.
  7. The most effective is formic acid. Formic acid has been distilled for centuries from the venom of stinging ants. Don't inhale the fumes. Prolonged exposure to the fumes can damage your optic nerves. Using formic acid in an open, ventilated area such as a porch should not cause any problems, as long as you protect yourself with rubber gloves, long sleeves and pants, eye protection against splashing, and a breathing mask. [3]
  8. Allow it to remain on the paint long enough to dissolve the paint. How long can vary depending on how old and hard the paint is. When the paint is soft, you can pry it off with a hand scraper and wire brush, then rinse with fresh water. On a porch, you can accomplish this with your garden hose.
    • After this, you will end up with a clean spot on the concrete, so it will be a noticeable spot until it gets dirty again.
  9. If you suspect that the paint residue contains lead, contact your local trash collection authorities before you start your project for information on proper handling and disposal. [4] If you suspect the paint contains lead, local laws may require you to hire a pro for this project, so check before you start. [5]
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I clean a white watering hose?
    Community Answer
    To clean a white watering hose you will need a sponge, a bucket of water and soap.
Ask a Question

      Advertisement

      Tips

      • If you use a sand blaster, cover nearby windows, doors, and frames with plastic sheeting to avoid damage to the glass and frames.
      • If you use a pressure washer, avoid blasting water directly onto window or door frames as you could force water through to the inside of your house.
      • Cover nearby landscaping with plastic sheeting to protect plant beds from over-splash of acid, flushed paint particles, or scrapings.
      Show More Tips
      Advertisement

      Warnings

      • If you suspect that the paint residue contains lead, contact your local trash collection authorities before you start your project for information on proper handling and disposal. If you suspect the paint contains lead, local laws may require you to hire a pro for this project, so check before you start.
      • Formic acid in 85% concentration is not flammable. It decomposes to carbon monoxide and water. In the U.S. and Europe, a diluted form is actually used as a feed preservative. [6] As with all chemicals, read the label carefully and store any unused chemical strictly according to the label instructions. Formic acid at a concentration higher than 85% could become unstable over time if not properly stored.
      Advertisement

      About this article

      Thanks to all authors for creating a page that has been read 137,174 times.

      Reader Success Stories

      • Ree Day

        Apr 27, 2016

        "It gave me exactly how to go about removing the paint off my porch. So now I'm ready to take on the project. ..." more

      Did this article help you?

      Advertisement