Q&A for How to Make a Door

A batten door consists of rows of parallel boards that are held together by perpendicular and diagonal support battens. It's a simple, but sturdy door design. The battens that hold it together provide extra support and strength.

A door is considered a "flush door" when it's designed with plain, flat facings on both sides. The core can be solid, hollow, or stave, but if both sides of the door are a plain face, then it's a flush door.

As its name implies, a paneled door is constructed with multiple panels. They're usually arranged in a decorative pattern and installed between the frame of the door for extra support. They're commonly made out of 4 or 6 panels that are connected to form a cohesive whole.

Try sanding the edges down, coating them in compound, and then sanding again. You'll probably want to paint it though.

Yes, you can make your door out of plastic as long as it can open and close properly.

Yes, you can use a hand saw to cut plywood, as long as you cut in a straight line and your angles are accurate.

It depends on the mistake. If the door is too big, you might be able to sand or cut it down. However, some errors, like incorrect angles, might not be fixable.

You would likely need a more durable material, like aluminum or stout oak, as it needs to protect your house from weather and potential intruders. A strong door also enhances the overall aesthetic of your house.

Standard wood glue will work; you can find it at most hardware stores. It's best to choose a mid-priced brand to ensure quality and reduce the risk of failure.

Any wood glue from a hardware store should be sufficient; choosing a mid-priced option can ensure good quality.