Download Article
Download Article
Wood furnishings and décor add a warm touch to homes and businesses. To keep the wood looking its best, it needs to be cleaned properly. Learn how to clean wood to avoid damaging décor and valuable heirloom pieces. Cleaning wood isn’t hard with the proper cleaning supplies like wood-specific cleaners, detergent, wax, and even homemade solutions.
Steps
-
Clean excess dust or dirt from the wood floor. The first step is to remove any debris from your floors. Grab a broom and sweep your floor clean. You may also want to mop it with warm water and a little bit of a water-based cleaner. [1] X Research source
- Remove loose surface dirt and dust with a clean, soft cotton cloth in specific areas, like under furniture.
- Suck up dust or surface dirt with a vacuum cleaner, using the hose and soft brush attachments.
- Cleaners that have a neutral PH balance won’t disturb the finish of your floor. Cleaners like detergents can remove dust and dirt, but have a higher PH balance. Only use these on older floors.
-
Damp-mop the floor. To get a real good cleaning in that lifts the dirt and grime you can’t remove by sweeping you can damp-mop your floors. Use a wood cleaning product that is designed for your hardwood floor. Dilute the product in water according to the instructions on the bottle. Then, dip a sponge or mop into your solution and wring it out until it is close to dry. Scrub your floor.- You want your sponge or mop to be damp and not wet so you don’t leave any standing water on your floor.
- Floor cleaners like Bona Hardwood Floor Cleaner are specifically made to be safe on hardwood floors, and will even get rid of scuff marks and hardened spills. [2] X Research source
EXPERT TIPCleaning GuruSusan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.Try cleaning with deionized water. Deionized water has had all its ions removed and has no charge. The water is chemical-free, won't damage any finishes, and dries quickly. Water is an underrated and fantastic cleaning agent. The suds and fragrances in many commercial cleaners are only there for effect.
Advertisement -
Remove marks. Before you go and start scrubbing at those scratches, marks, and stains, determine which kind of hardwood floor you have. If your stains are surface level, you probably have a hard urethane finish. However, if the stain goes deeper into the wood, you may have a soft oiled finish. [3] X Research source
- For hard finishes, only use a soft, clean cloth to wipe. Harder brushes, harsh chemicals with a higher PH balance, or steel wool can ruin your coating.
- For soft finishes, you can use No. 000 steel wool and wood floor wax. If the area doesn’t lighten up, apply vinegar to warm water and soak the area for about an hour. Then rinse with a clean damp cloth. As a general rule for soft finishes, use steel wool and floor wax for tougher marks, and a light cloth with dishwashing detergent and water for lighter, or oil-based stains.
Advertisement
-
Dust your furniture. Use a soft, lint-free cloth to go over all of your furniture before you wipe it down. This will lift any dust and other small particles that might otherwise get ingrained into your furniture when washing.
- Feather dusters aren’t as effective for furniture because a feather duster won’t lift any particles. Some feather dusters also have sharp quills which could scratch your furniture.
-
Start on a small surface. Unless you know for sure what kind of finish your furniture is, paint, stain, or another treatment, it’s best to start with the least harmful cleaning products on a small area. Grab a cotton ball or soft cloth. Moisten your cotton ball or cloth with warm water and add a drop of dish soap or dishwashing detergent. Start wiping an inconspicuous area of your wooden furniture like the inside of a leg.
- Right now, you want to test to see if the detergent is going to be harmful to your wood furniture. Let the treated area sit for a minute or so and look for any discoloration.
- If you don’t notice any unwanted change, your solution is safe.
- If you do notice a change, then continue with only warm water and a damp cloth.
-
Mix water and dish soap. If you didn’t notice a change when you tested your furniture. You can mix water and dish soap in a bucket. Mix 1 gallon (3.8 L) of warm water and 1/2 cup of liquid dish detergent. You want to add enough soap so your water is soapy. Start wiping down your furniture with a damp cloth that you dipped in your solution.
- Be careful not to soak the wood. Keep your cloth or sponge damp but not soaking wet. Too much water will ruin the wood.
- You can also use mineral oil to clean your wood in addition to or as a substitution to detergent.
-
Wax or polish your wood . After you’ve thoroughly wiped down your wood, protect it by applying a wax or finish. You can find a variety of wood-specific sprays and polishes at any home goods store or grocery store. Look for sprays that contain silicone oil for protection. For waxing, use only a soft cotton cloth or wax brush. Apply the wax a little at a time and rub it into the wood in a circular motion.
- Once the wax begins to look dry or hazed over, grab a new cotton cloth or wax brush and buff the wax going in small circles over the waxed area.
- Different waxes will require you to wait different amounts of time before buffing. Read the directions on your wax for best results.
- Test a rub-on oil, spray, or wax on a small area of wood to ensure it does not cause damage to the wood's finish.
Advertisement
-
Use non-harmful homemade cleaners. If you have other wood items or surfaces, especially wooden bowls, you can clean these items with safe ingredients that are safe to digest.
- You make an effective and harmless wood cleaner with a lemon, olive oil, and water.
-
Mix your ingredients. Take one lemon and cut it in half, then strain the juice in a container. It’s best to strain the pulp and seeds out for your solution. Add a tablespoon of olive oil and water each.
- You can stir your mixture together, but it’s best to mix your ingredients in a container with a lid and shake it up to diffuse the lemon juice and olive oil into the water.
- You can also use distilled white vinegar if you don’t have a lemon.
- If you’re mixing olive oil and vinegar, add one tablespoon of vinegar for every three tablespoons of olive oil.
-
Wipe your surfaces. With a clean cotton cloth, dip it into your solution and ring the cloth out so it’s moist, not wet. Simply wipe down your surface with your homemade solution.
- Test your solution on a small area first just to make sure it reacts well with your wood.
- This homemade product is not only safe for you, but it won’t leave a film or streaks behind.
Advertisement
Community Q&A
Search
-
QuestionI need to clean 50 years of caked-on grime on a wooden carving with intricate detail. What should I do?Community AnswerTough one. I would brush on a mixture of turpentine and linseed oil and wipe off immediately. Repeat, perhaps leaving mixture on a little longer, until you get the desired results. I'm a hobbyist, not a pro, but work with wood finishes a lot.
-
QuestionHow do I restore wooden doors that have been damaged by rain water?Community AnswerLet them dry out really well if there is any chance they are still wet. Sand them down with progressively finer grits of sandpaper (with a dust mask on) while determining if they are really worth your effort. If so, and the doors have a natural wood finish and look great after all your sanding, then seal them with either oil or water-based polyurethane (depending on the type of coating they had). If they need paint, prime them first with a good raw wood primer, then paint and seal with poly. If after sanding the damage is visible, but you're dedicated, then go OUTSIDE and apply coats of real shellac first before painting them. Shellac covers anything, but has a short working time. Read the label.
-
QuestionHow can I clean wood paneling?Community AnswerUse 1 part white vinegar to 5 parts water. Spray on the panels and wipe them down with a clean, dry cloth.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Test small, hidden areas of wood to ensure the cleaning method you want to use does not cause any damage.Thanks
- Homemade cleaners that are made with digestible ingredients are great for cleaning wood tables, bowls, and other dinnerware.Thanks
- Follow the instructions on any cleaning products you buy to ensure you don’t harm your wood.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not try to clean bare wood, such as wall paneling. It is not sealed, which means it will soak up water.Thanks
- Do not allow water to stay on finished wood.Thanks
Advertisement
Things You'll Need
- Cleaning and dusting cloths
- Vacuum with hose and soft brush attachment
- Wood cleaners
- 2 buckets
- Warm water
- Mild liquid dish detergent
- Mineral spirits
- Cotton swab
- Soft bristle brush
References
About This Article
Article Summary
X
To clean wood furniture, start by dusting it with a soft, lint-free cloth. Then, mix 1 gallon of warm water with ½ a cup of liquid dish detergent, making it as sudsy as possible. Next, dampen a cloth in the mixture, and try cleaning just a small area on your piece at first. If the solution doesn’t damage or change the look of the wood, wipe down the whole piece. Once it’s completely clean, you can protect your wood by putting furniture wax or polish on it. To learn how to clean your hardwood floor or wooden salad bowl, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 179,052 times.
Reader Success Stories
- "Very helpful. I had the white vinegar and olive oil on the shelf so I could finish my project without braving icy roads and swirling snow. I cleaned an old woven wood fireplace basket getting rid of smells, dirt, stains and dust balls in one cleaning." ..." more
Advertisement
"Very helpful. I had the white vinegar and olive oil on the shelf so I could finish my project without braving icy roads and swirling snow. I cleaned an old woven wood fireplace basket getting rid of smells, dirt, stains and dust balls in one cleaning."
..."
more
"Just wanted to know the best way to clean wood furniture naturally. Thanks."
