Moving into a new home and want to install window treatments? Looking to upgrade those boring old vinyl blinds with something a little more impressive? If so, you’re in the right place! Choosing and installing blinds might seem like a daunting task, but it’s actually a lot easier than you’re probably imagining. In fact, once you’ve chosen the type of blinds you want, most of the difficult decisions have already been made. Read on to learn everything you need to know about choosing and installing blinds.

Things You Should Know

  • Install your blinds by driving pilot holes for the brackets, screwing them in, and then sliding the blinds into place.
  • Measure carefully before ordering your blinds by checking the width and height of multiple points in each window. Use the narrowest width you can find, and the tallest height.
  • Choose the type of blinds you want based on how much you want them to stand out in your room.
Method 1
Method 1 of 3:

Assembling and Installing the Blinds

Download Article
  1. The vast majority of blinds are installed the exact same way—you drill brackets into the window frame and then you slide the top of the blind into the hardware before closing it. However, your blinds may have unique adjustments you’ll need to make before installation can take place. Read the instructions thoroughly to understand what you’re doing.
    • To install blinds, you will need a drill, pilot bits that are slightly smaller than the screws that came with your blinds, and a ladder.
    • If you’re installing outside mount blinds (which are above the window, not inside of the frame), you’ll need a level.
    • You won’t need to construct your blinds. They’ll arrive preconstructed and ready for installation.
    • This process is identical for cellular shades, roller blinds, shades, mini-blinds, and vertical blinds.
  2. Pick a window to start with. Take the bracket that opens to the right and hold it up against the top left of the inside of the window frame. Attach a pilot bit slightly smaller than your screws to your drill. Then, drill pilot bits through the openings for the screws in the bracket. Repeat this process for the bracket on the right. [1]
    • You can either hold the bracket still with one hand while you drill with the other, or use a pencil to mark the location of each pilot hole.
    • If your window is especially wide, you may need to drill pilot holes for a center bracket to support the weight. Use a measuring tape to find the center of the frame before you drill!
    • This is for an inside mount. For an outside mount, drive pilot holes into the drywall above the window frame. Use a level to ensure both brackets are even.
    Advertisement
  3. Remove the pilot bit from your drill and put the Phillips screw bit back on. Hold the lefthand bracket in place and drill the screws into the pilot holes you’ve made. Drill each screw in as far as it will go to fully secure the bracket in place. Repeat this process on the opposite side of the frame. [2]
    • Most blinds come with 2-4 screws for each bracket. Use as many screws as you can for the most secure fit.
    • If you have a bracket for the middle of your blinds and you’re adding it to support the weight of an especially long window blind, install that as well.
  4. With both brackets installed, lift the blind up to the top of your window and slide the bulky, top railing of the blind inside of both brackets. Close the bracket by folding the top tab of the bracket down, or by sliding the separate cover piece into the bracket. This will pin the blind inside of the window frame. [3]
    • How each blind bracket is closed differs from style to style, but there are two general categories of closure. The first is a folding hinge on top of the bracket that slides over the top. The other is a separate piece that usually slides into the bracket to close it.
  5. If you have higher end blinds, you likely have a valence—which is a cover that goes over the top railing of your blinds to cover the brackets. Refer to your blinds directions to determine how to install the valence. Typically, you attach 2-3 clips to the top railing of the blinds and then slide the valence over it. [4]
    • You may need to slide the wand over a small hook to attach the part of your blinds you rotate to open or close them.
    • Once your valence is attached, you’re all good to go! Continue to install the remainder of your blinds the same way you installed the first one.
  6. Advertisement
Method 2
Method 2 of 3:

Measuring and Ordering the Blinds

Download Article
  1. Grab a notebook, a pencil or pen, and a measuring tape. Starting at the very top of the window frame, write down the length. Then, measure the length of the window in the middle. Finish by measuring the very bottom and jot all of these numbers down. [5]
    • Windows—as we’re sure you’re about to find out—are not perfectly even at each point. Unless the home is brand new, the wood frame will have expanded and contracted over the years, leaving it uneven and asymmetrical.
    • For each window you’re measuring, you will take a total of 6 measurements.
    • This process is for inside mounted blinds. For outside mounted blinds, measure the width of the entire window above the trim (on the drywall), down to whatever height you want the blind to go to (normally the bottom of the window frame).
  2. Use your measuring tape to measure the height of the window on the leftmost vertical edge of the window frame. Then, measure the middle of the window from the top to the bottom. Finish by writing down the vertical height of the window frame on the right side. [6]
  3. You now have two sets of numbers—3 lengths and 3 heights. Take the longest height and use that measurement for your blind’s height. For the length, use the smallest measurement you’ve taken. [7]
    • Blind manufacturers automatically remove a little bit of material from whatever measurements you submit to ensure the entire blind fits, so don’t make subtractions!
  4. Go online and look for a blinds manufacturer with pricing and options that suits you. The larger blinds manufacturers are all very high quality, so it’s hard to go wrong if you’re buying from a bigger name. Well-known companies for window treatments include Blinds.com , Blindster , The Shade Store , Lowes , and Home Depot . [8]
    • Some blinds manufacturers will even send you free samples of slat and shade textures if you aren’t sure about what you’re ordering!
    • You can go to your local home improvement store and sort through their in-store stock, but they’re very unlikely to have the specific measurements you need for your windows. You’re almost always better off ordering the blinds.
  5. Advertisement
Method 3
Method 3 of 3:

Choosing a Type of Blind

Download Article
  1. Blinds can be expensive, but vinyl blinds tend to be very cheap if you’re on a budget. They do have a metal-ish, plastic quality that a lot of people don’t like, though. Real wood tends to feel very high-end. It’s stiff, and has a weight to it that tends to look good. Faux wood offers the best of both worlds—it’s a little cheaper than real wood without feeling quite as cheap as vinyl. [9]
    • Expect to spend $15-30 per vinyl blind depending on the size. Faux wood can range anywhere from $30-120, while real wood tends to be slightly pricier than faux wood (but not dramatically so).
    • For a whole home, you may be spending anywhere from $300 to $3,000 depending on how many windows you have and what material you choose.
  2. There are a variety of different styles when it comes to blinds. While all of these blinds will perform the same job—they let light in or cover it up—they have different aesthetic impacts on your space. [10] Your options are:
    • Cellular shades . Also known as honeycomb shades, these shades are pleated layers of fabric that help insulate the window and absorb sound. They tend to do well in modern spaces.
    • Roller shades . Roller shades are single layers of fabric, cloth, or thick paper which rolls up into a bundle when you pull a chain. These shades are super slick and tend to work in modern spaces.
    • Vertical blinds . These old school blinds have vertical slats instead of horizontal slats. These blinds tend to do well in more vintage spaces.
    • Horizontal/Venetian blinds . This is what most people mean when they say “blinds.” Horizontal, aka Venetian blinds contain horizontal slats that slide up and down when you raise the window. These blinds will work anywhere.
  3. The thinner your slats are, the smaller the blinds will look in your window. However, larger slats tend to be considered “classier” and more elegant. Choose the width of your slat based on how noticeable you want the blinds to be and how big your window frames are. [11]
    • Bigger 2 in (5.1 cm) blinds will stand out and make a much larger statement than smaller 1 2  in (1.3 cm) blinds.
    • 1 2  in (1.3 cm) blinds are probably ideal if you want to minimize how noticeable the blinds are or your room is very small.
    • The size of your window may limit you here. If the frame on the inside of your window is only 1 in (2.5 cm) wide, you have to use 1 in (2.5 cm) blinds or smaller.
  4. Blinds typically come in 3 different colors—white, black, or wood/brown. White blinds tend to make a room brighter and warmer feeling, while black blinds are trendier and stand out a bit more. Wood/brown blinds tend to be a little more rustic and old school. [12]
    • There are more unique colors out there if it’s something you’re really interested in, but it can be tough to make non-neutral blinds work.
    • Blackout blinds and shades are almost always black. They’ll completely block out light to keep the room as dark as possible.
  5. Inside mounted blinds go on the inside of the window frame so that the trim of the window is entirely visible. Outside mounted blinds are installed on the drywall above the window frame so the trim at the top is covered when the blinds are down.
    • Most blinds can be installed either with an inside or outside mount. However, measuring for each type of blind is slightly different.
    • Inside mounted blinds are exponentially more popular than outside mounted blinds. The reason is that outside mounted blinds “hide” the window entirely, which can be less attractive. They also tend to make the room feel smaller. Still, they’re an interesting choice if you have some beautiful blinds and the room is very large!
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Should bedrooms have drapes or blinds?
    Karen Parziale
    Home Stager & Interior Designer
    Karen Parziale is a Home Stager, Home Organizer, and the Founder of The Real Estate Staging Studio based in Hoboken, New Jersey. Karen has over 15 years of home staging and decorating experience and has staged over 5,000 homes. She specializes in project management, space planning, material selections, and builder, architect, and client relationships.
    Home Stager & Interior Designer
    Expert Answer
    Take a look at the size of your windows first. If your bedroom has really big, sprawling windows, you might be better off choosing going with drapes.
  • Question
    Which type of blinds are best?
    Karen Parziale
    Home Stager & Interior Designer
    Karen Parziale is a Home Stager, Home Organizer, and the Founder of The Real Estate Staging Studio based in Hoboken, New Jersey. Karen has over 15 years of home staging and decorating experience and has staged over 5,000 homes. She specializes in project management, space planning, material selections, and builder, architect, and client relationships.
    Home Stager & Interior Designer
    Expert Answer
    Faux blinds are great! They're about 2 in (5.08 cm) thick and are a lot more stylish-looking than aluminum blinds.
  • Question
    Can I hand screw in the brackets? I have no drill.
    Community Answer
    It depends on what the wall is made of. If it is wood, it will be very difficult.
See more answers
Ask a Question
      Advertisement

      Tips

      • Go with blinds or drapes, but not both. It’s just too messy visually if you go for both blinds and drapes on a single set of windows. [13]
      • You might think the height of the blind doesn’t matter so long as the height of the blind at least reaches the bottom of the window. Unfortunately, if the blinds are super long, the “stack” at the top of the window when you open the blinds will be absolutely massive. It just won’t look very good. Aim to keep the height of the blind as close as possible to the actual height of the window.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Pencil
      • Spirit level
      • Laser level (optional)
      • Pilot drill bit
      • Drill
      1. https://www.homestratosphere.com/types-blinds/
      2. Karen Parziale. Home Stager & Interior Designer. Expert Interview. 21 April 2020.
      3. Karen Parziale. Home Stager & Interior Designer. Expert Interview. 21 April 2020.
      4. Karen Parziale. Home Stager & Interior Designer. Expert Interview. 21 April 2020.

      About This Article

      Article Summary X

      To install blinds, start by making marks on the wall where you want to hang the blinds, either inside the window frame or on the wall above it, depending on your preference. Next, open the door on the each mounting bracket and line it up with the mark you made. Then, attach the brackets by drilling screws through the holes on the back of the bracket. Once the brackets are attached, snap the valance clips onto the head rail of the blinds before placing the rail into the brackets. Finally, close the bracket doors and attach the valance to the head rail. For tips on how to measure your windows before ordering blinds, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 593,266 times.

      Reader Success Stories

      • Bill Lowe

        Oct 7, 2018

        "Wish I had read this before I began installing my blinds. It would have made my work smarter rather than harder."
      Share your story

      Did this article help you?

      Advertisement