Download Article
Download Article
Ceramic flower pots are known as earthenware. They are made of clay, which is hardened by firing them at a high temperature in a kiln. Ceramic pots are usually fired again with a glaze, and those are they type you usually purchase in a garden center. Unglazed pots are available at craft stores. The steps below explain how to paint both glazed pots you have on hand that you want to spruce up, and unglazed ceramic flower pots.
Steps
-
Use a hose or your kitchen faucet to rinse your ceramic pot inside and out. -
Wash and scrub it with detergent and water using a scrub brush or abrasive pad. You can also use an old toothbrush to clean underneath the lip of the pot.Advertisement -
Rinse the pot well inside and out. -
Set the pot in the sun and allow it to dry thoroughly. -
Purchase glossy interior/exterior spray paint, 200-grit sandpaper, paintbrushes and a can of latex primer. -
Put the pot outside on a table, preferably on a day that is not windy or rainy. Put a piece of cardboard, plastic sheeting or some newspapers on the table to protect it from the paint. -
Sand the pot with sandpaper just enough to roughen up the glossy surface. -
Wipe the pot down with a clean, damp cloth. -
Apply the primer with a brush, and let it dry thoroughly. Latex primer adheres well to roughed-up ceramic. You can apply a second coat of primer to make sure you have perfect coverage. Let all coats dry completely. -
Read the directions on the can before you begin painting. You usually need to shake the can vigorously first. -
Spray the interior of the pot, using even, sweeping strokes. -
Allow the inside paint to dry thoroughly. (If you don’t want to apply color to the inside, turn the pot upside down and proceed with the next step.) -
Spray the exterior of the pot. Use sweeping motions so that the color goes on evenly. -
Allow the pot to dry in the sun. -
Save any leftover paint in case you need to do touch-ups. -
Wait at least 24 hours after painting before you repot your plant.
Advertisement
-
Purchase unglazed ceramic pots at a craft store. These stores also carry a variety of paints, water sealers, finish glosses and brushes that are suitable for painting unglazed pots. -
Choose a work area that is well-ventilated. -
Cover your work surface with plastic or newspapers to protect it. -
Remove seams on the pot that were created from the mold. Use a chisel to gently chip the seams off or sand them lightly with fine to medium grade sandpaper. This step is necessary for a smooth surface, and the paint will adhere better if you lightly sand it first. -
Brush the pot off with a soft paint brush or a dry cloth. You can also blow off any dust and dirt with a hair dryer. -
Wipe the pot down with a damp cloth. -
Allow the pot to dry completely. -
Spray the inside of your pot with a waterproof sealer. A sealer will help prevent moisture from soaking through the pot, which could ruin the outside finish. -
Let the sealer dry completely. -
Apply a primer to the ceramic pot using a paintbrush. The primer helps the final coat of paint adhere and it covers any small imperfections or discolorations. -
Let the primer coat dry completely. -
Brush a thin coat of acrylic paint on the entire pot. Use the best brush you can afford; the bristles on cheap brushes invariably come loose and get stuck in the paint. -
Allow the paint to dry. -
Apply another thin coat of paint to the ceramic pot and let it dry. -
Use a thin coat of acrylic gloss to protect the paint. -
Allow at least 24 hours of drying time before you put soil in the pot.
Advertisement
Community Q&A
Search
-
QuestionWhere can I obtain a ceramic pot?Beth H.Community AnswerMany places sell these pots inexpensively, such as Dollar Stores, Walmart, and yard sales.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Wash, dry and paint multiple pots at a time. Save some of them to give as gifts.Thanks
- Try painting 3 or 4 pots the same color and group them together on your patio.Thanks
- Art fixative spray will also protect the finished paint on your ceramic pots.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Wear safety glasses and a mask while spraying paint or fixatives.Thanks
- Never put ceramic pieces in the dishwasher.Thanks
- It’s best to use any type of paint, sealer or fixative spray outdoors. If you must paint inside, make sure the room is well-ventilated.Thanks
Advertisement
Things You’ll Need
- Glazed ceramic flower pot(s)
- Unglazed ceramic pot(s)
- Spray paint
- Latex primer
- Waterproof sealer
- Acrylic paint
- Glossy sealer or fixative spray
- Clean rags
- Paint brushes (at least 2)
- Newspapers or plastic cloths
- Chisel
- Sandpaper
References
About This Article
Article Summary
X
To paint a ceramic pot, you’ll need sandpaper, primer, and paint. Start by sanding the pot to make the surface easier to paint. Then, apply a coat or 2 of primer with a paintbrush. Once the primer’s dry, paint the pot. If the pot’s already glazed, use spray paint. If it’s unglazed, use acrylic paint instead. Let it dry and paint another coat to achieve the right color. If you’re painting an unglazed pot, you should also cover it with a thin coat of acrylic gloss to protect the paint. Leave the pot to dry for 24 hours before you put anything in it. For more tips, including how to reduce fumes from spray paint, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 269,424 times.
Reader Success Stories
- "I am glad to know that I can change the color of my favorite shaped pot. I really didn't want to get rid of it." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I am glad to know that I can change the color of my favorite shaped pot. I really didn't want to get rid of it."
..."
more
"Need to wipe with damp cloth after a light sanding. Also, use of hair dryer, never considered that."
"Applying primer helped."
