What Kind of Reality Check Do I Need Quiz
Q&A for How to Put in an Above Ground Pool
Coming soon
Search
-
QuestionCan a pool be leveled after being filled?Community AnswerNo. Getting the site level is one of the most important things you need to do prior to erecting the pool.
-
QuestionHow do I reinsert a portion of the outer side wall that has slipped off the bottom rail?Dennis CookCommunity AnswerFrom the outside, dig out around where it has slipped out. Use tour fingers to locate it and lift up on the bottom rails as you place it back in. Pack sand or dirt under the rail to insure it will not settle again. Back fill it back up and feel around on the inside to fix any displaced sand under the liner from the correction and your fingers.
-
QuestionCan I back fill around an above ground pool once it's filled?Community AnswerYes. Most pool manufacturers recommend 4 inches up the side.
-
QuestionDoes a pool wall sit on top of the sand or do I have to fill the inside or the pool wall with 4" of sand?Community AnswerIt's really up to you, but if i were you i would cover it with about 4" with sand.
-
QuestionWhere do I put my backfill sand?Dennis CookCommunity AnswerAround the bottom of the entire pool. Be sure to cover the blocks on each post and in between each post on the outer wall.
-
QuestionCan I backfill sand around outside pool (3 ft)?Dennis CookCommunity AnswerBackfilling anything that much causes problems in the future. When changing liners or other services that the pool must be drained usually ends up in the backfill caving in on the pool and you are back to square 1.
-
QuestionCan I use top soil instead of sand?Dennis CookCommunity AnswerIt is not recommended. The sand keeps rocks or other things from coming through the liner over time, and the sand is softer on your feet.
-
QuestionCan an above ground pool be erected over existing paving, using it as its foundation?Community AnswerYou'll still need sand underneath. So, figure a way to create a barrier to keep the sand in the circle.
-
QuestionIf I have virgin soil, how much sand do I need to cover it?Dennis CookCommunity AnswerDepends on the size of pool you are installing. The average pool is 24ft and it takes at least 5 tons of sand.
-
QuestionWhat are the state guidelines for having a pool?Community AnswerYour state guidelines will depend on the state you're in. I would recommend doing some online research to find out what your states laws are regarding above ground pools on private property.
-
QuestionCan I put an above ground pool on pavers?Community AnswerI put my 22' x 52" Intex pool on pavers for 5 yrs now with no problems. I use the 6x6x2 from Home Depot.
-
QuestionHow do I install liner in a 30-foot metal-sided pool?Dennis CookCommunity AnswerDrain pool. Remove old liner. Fluff or fix the sand. Take off all top plates and caps. Put new liner in pool. Take 2 or 3 top rails off at once while installing new liner. Be sure to replace rails as you go to keep from collapsing. Work out wrinkles and fill. Replace all top plates and caps.
-
QuestionI have an 18' diameter pool (round) and want to put 2" of sand down first. How many yards of sand will I need?Community Answer2 1/2 tons is best for a 18' round; maybe 3, depending on how level your site is.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit