A patchy and weedy lawn is unpleasant and unappealing. Luckily, there are ways you can get rid of the weeds and replant grass seed to have a lush lawn. Before you start, it's important that you purchase the right type of seed for your environment and you test your lawn so you know which kind of amendments and compost to use. If your lawn is really spotty and full of weeds, you should kill all of the weeds and old grass in your lawn and start over. If you only have a few weeds, you can spot weed and reseed.

Method 1
Method 1 of 3:

Testing Your Lawn and Getting the Right Seed

  1. Use a spade to dig 6 inches (15 cm) into the ground in 3 different spots on your lawn. Separate the dirt from rocks and grass and scoop them into a container. [1]
  2. Call a local garden center or extension office and ask them if they can test your soil for nutrient deficiencies and pH level. Send the soil to them after talking with them to get an analysis of what kind fertilizers and amendments you should use. [2]
    • You can also purchase a pH test at a gardening store, though it won't be as comprehensive as sending in your soil for a professional evaluation.
    • The garden center or extension office will also be able to identify any existing issues with your lawn.
    Advertisement
  3. If it gets cold in the fall and winter where you are, you’ll want to purchase cool-season grass seed such as bentgrass, bluegrass, and tall fescue. If you live in an area that has a warm climate year-round, you’ll want to get warm-season grasses such as Bermuda, centipede, and zoysia.
    • You can also purchase a mixture of seed to repair damaged lawns or protect your grass from drought conditions.
    • Warm-season seeds do better in hot drought conditions, while cool-season seeds do better in the shade and cold conditions. [3]
  4. If you are planting cool-season grass, you want to plant it in the fall or spring. During these times the soil is warm but the air is cool, creating the perfect grass growing conditions. If you are planting warm-season grass, you should plant the seed in late-spring or mid-summer. [4]
    Advertisement
Method 2
Method 2 of 3:

Performing Spot Weeding and Seeding

  1. Hold the spade or deweeding tool 1 inch (2.5 cm) away from the base of the weed. Angle your tool downward towards the center of the weed, trying not to sever any of the roots. Push down on the handle of your tool to uproot the weed. [5]
  2. Severed roots will cause new weeds to sprout. Dig up any weed stems that you see and discard them in a garbage bag along with the weeds. [6]
  3. Use a soil-based compost that’s high in organic material to promote the growth of new grass. Lay down 1–2 inches (2.5–5.1 cm) of compost. [7]
  4. Lay down a handful of seeds over the compost. The seeds should cover the area in a thin layer. The seeds should not pile up. If the compost you used was moist, you don’t need to water the seeds anymore. [8]
  5. Horticultural fleece or nets can be purchased at gardening stores or online. This will prevent animals like squirrels or birds from eating the grass seed before it has time to germinate. Lay the fleece over the area where you laid compost and grass seed. [9]
  6. Use small wooden stakes, nails, or branches to secure the fleece in all 4 corners. This should keep the grass seed covered. [10]
  7. Warm-season grass could take up to 24 days to germinate. Cool-season grass will typically germinate in under 2 weeks. Once the grass seed starts to sprout into grass, you can remove the fleece and allow the grass to mature. It may take several weeks for the spot to fully fill in. [11]
  8. There still may be weed seeds around the area. Once the grass has grown a little, you should watch for any new weeds. Regularly weed the lawn to stop their growth.
    Advertisement
Method 3
Method 3 of 3:

Reseeding the Entire Lawn

  1. To completely start over, kill the grass that is currently there. Applying black poly film over the entirety of your lawn will kill the grass underneath. Alternatively, you could lay wet newspaper or cardboard over the grass. Put 6 inches (15 cm) of compost on top of this layer. [12]
    • This method can take up to 2-3 weeks for the grass and weeds to fully die. Once the weeds and grass have died, remove the film or paper from your yard.
  2. Put a collection bag on the back of your lawnmower so that it collects all of the clippings and cut weeds. Set the mower to cut 1.5 inches (3.8 cm) and go over your entire lawn and cut it to the same length. [13]
    • Not using a collection bag can spread weed seeds back onto your lawn.
  3. Go over the lawn with a stiff rake and pile up loose grass and weeds. Put the excess weeds and old grass into garbage bags. Remove any excess weeds or grass that are on the surface of the lawn before moving onto the next step. [14]
  4. Wear a pair of gloves and start to spread the compost over the surface your lawn. Then, use a rake to level out the compost so that it’s even 1 2 inch (1.3 cm) layer on your lawn. [15]
    • If you got your lawn tested, you can use a compost with the specific nutrients that your lawn needs to be healthy.
  5. Fill the hopper in your broadcast spreader with a 9-3-4 balanced fertilizer. [16] Lay down 1 pound (450 g) of fertilizer for every 1,000 square feet (93 m 2 ).
    • You can rent or purchase a broadcast spreader from a hardware or gardening store.
    • This fertilizer will encourage the growth of your newly planted grass seed.
    • 9-3-4 stands for 9 parts nitrogen, 3 parts phosphorus, and 4 parts potassium. [17]
  6. Use a broadcast spreader to lay 7 pounds (3,200 g) of seed per 1,000 square feet (93 m 2 ) of lawn. Fill the hopper of the spreader up with the appropriate amount of grass seed. Then, run the spreader across the surface of your lawn. [18]
    • For example, if you had a 1,500 square feet (140 m 2 ) lawn, you'd need to distribute 10 pounds (4,500 g) of seed over the lawn.
  7. Distribute the seeds as evenly as you can with the backside of the rake so that it grows evenly. Rake around the compost so that it mixes in with the seeds and the seeds become embedded in the compost. [19]
  8. Lightly water the lawn so you don't wash away the seeds. Water the lawn once in the morning and once when the sun goes down. Continue watering the lawn 2 times a day until the seeds start to germinate and grass starts to grow. From there, you can regularly maintain your lawn. [20]
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I distinguish grass from weeds?
    Community Answer
    Grass is a single very thin leaf, weeds are multi-leafed thin stalks. You can let weed killer figure it out.
  • Question
    I've got a small lot on a river, so the soil is moist, and half of the lawn is just weeds. Any way that killing those weeds and throwing down some soil and seed over them work?
    Community Answer
    Kill the weeds first, try Weed-B-Gon in a pump sprayer. Depending on the hardiness of your weeds, do the Weed-B-Gon twice in a month with 2 weeks between applications. 2 weeks after your last weeding, throw down a liberal amount of seed. Water the seed area softly for 5 minutes at dinner or later daily for 2 weeks and you'll be growing. Finally, don't cut your lawn lower than 2 inches, so the grass can root well and shade out baby weeds.
Ask a Question

      Advertisement

      Things You'll Need

      Testing Your Lawn and Getting the Right Seed

      • Spade or shovel
      • Container
      • pH soil test (optional)

      Performing Spot Weeding and Seeding

      • Spade or deweeding tool
      • Moist compost
      • Grass seeds
      • Horticultural fleece
      • Wooden stakes

      Reseeding the Entire Lawn

      • Lawnmower
      • Black poly film
      • Rake
      • Compost
      • Balanced fertilizer
      • Grass seed
      • Water

      About this article

      Article Summary X

      To reseed a lawn with weeds, start by covering your lawn with a layer of wet newspaper or cardboard with mulch on top to kill all of the existing grass and weeds. Then, after a few weeks, remove the layer of newspaper or cardboard, and mow your lawn. Next, lay down a layer of compost, and spread some fertilizer over it. Finally, spread grass seed over the surface of your lawn, and water it twice a day until the grass starts to grow. To learn how to choose the right grass seed for your lawn, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 84,320 times.

      Reader Success Stories

      • Anonymous

        May 8, 2018

        "The pictures along with the step-by-step is super helpful. When I receive technical instructions, I don't want ..." more

      Did this article help you?

      Advertisement