How to Turn on a Skateboard

Co-authored by Jon Depoian

Last Updated: June 24, 2024 References

When you’re first learning how to skateboard, it can be difficult to pick up new skills. You’ve gotten comfortable standing on the board, and can even push off and cruise a short distance in a straight line. Next, you’ll need to learn how to turn. Steering on a skateboard is done one of two ways: leaning your weight over one side of the board for gentle, sweeping turns, or lifting the tail and pivoting the nose for sharp, sudden changes of direction.

Things You Should Know

You can turn via the leaning method or by using the tail to achieve a kick-turn.
For the leaning method, ride with your feet over the board's bolts, lean forward or backward to turn your board, and finally, try to stay upright.
To do a kick-turn, ride with your feet properly placed, move your back foot over the tail, push down just slightly, and finally, as the nose lifts up, use your front foot to guide your board in the right direction.

Method 1

Method 1 of 2:

Leaning Into a Turn

Download Article

1
Push off and start riding. Place your front foot on the board just behind the nose and push off against the ground with your back foot. Give yourself three or four strong pushes to get moving at a decent speed. Set your back foot on the board. You should now be cruising along, aimed straight ahead. ^{[1]
X
Research source}
- It’s recommended that you get comfortable with the basics of skateboarding before attempting to learn how to turn.
- Strap up with the proper protective gear—a helmet, wrist guards and knee and elbow pads—to safeguard yourself against scrapes, bruises and more serious injuries. ^{[2]
  X
  Research source}
2
Position your feet near the center of the board. Rest your lead foot right above the bolts that attach the board’s trucks to the deck. Slide your back foot forward until it’s in the same position over the rear trucks. This will ensure that you’re in the most stable position to keep your balance while turning. ^{[3]
X
Research source}
- Your feet should be lined up straight across the deck to create the leverage needed to generate the turn.
- Keep your feet away from the nose and tail. Putting too much weight on either edge will lift one set of wheels or the other off the ground.
Advertisement
3
Lean your weight in the direction you want to turn. Decide whether you want to steer to the left or to the right. If you ride regular (left foot up front), initiate a mild left turn by leaning your weight back over your heels, so that more pressure is put on the rear edge of the deck. Right turns can be performed by leaning over the toes. ^{[4]
X
Research source}
- The general idea is to simply lean in the direction you want to go. The fine-tuned mechanics of the skateboard will take care of the rest.
- These directions should be reversed for goofy riders (those who place their right foot up front). ^{[5]
  X
  Research source}
4
Try to keep your balance. As the deck tilts, all your weight will be over the wheels on one side of the board. This will cause them to veer in the direction you’re leaning, resulting in a smooth, gradual turn. Bend your knees and lower your center of gravity slightly as you steer to keep from being forced off balance by the motion of the turn.
- If you find yourself falling off to the side of the board, you’re probably leaning too hard. Don’t be too heavy-footed. Try repositioning your weight delicately at first and working your way up to wider curves.
5
Adjust your board to make turning easier. If you find that it’s difficult to perform leaning turns on your board, it may be because your trucks are too tight. Use a crescent or socket wrench to take a little tension out of the nut that secures and tightens the trucks. This will enhance their range and ease of motion, allowing you to glide into turns effortlessly. ^{[6]
X
Research source}
- Looser trucks will make leaning turns easier, but will reduce the overall stability of the board, as the deck will be able to move around more freely around the wheels. ^{[7]
  X
  Research source}
- Trucks are the metal axles that hold the wheels on, and there is one in the front and one in the back of the board. ^{[8]
  X
  Expert Source
  
  Jon Depoian
  Skateboarding Instructor
  
  Expert Interview. 5 June 2020.}
- Play around with different levels of tightness in the trucks to strike the right balance between stability and ease of movement.

Method 2

Method 2 of 2:

Using the Tail to Kick-Turn

Download Article

1
Get moving. Push off and begin riding. Work up a little bit of speed before you approach your turn. Stay poised on the balls of your feet, ready to shift your weight.
- If you’re not moving fast enough when attempting a kick-turn, you’ll most likely just end up spinning in place over the rear wheels.
- You'd use a kick turn for a sharper turn or, for instance, to go up on a ramp, turn, then ride down the same way you came. ^{[9]
  X
  Expert Source
  
  Jon Depoian
  Skateboarding Instructor
  
  Expert Interview. 5 June 2020.}
2
Place your feet in the proper position. As with the leaning method, keep your front foot rooted over the bolts of the front trucks. To perform a kick-turn, however, your back foot will need to be on the tail (the upturned rear edge of the board). Slide your rear foot back until it is in the center of the tail. You’re now in position to turn by lifting the front end of the board. ^{[10]
X
Research source}
- Keep your weight centered over the middle of the board. There’s no need to lean one way or the other as there is for an easier turn.
- Don’t put any weight on the tail until you’re actually ready to start turning. This is a good way to get acquainted with the concrete.
3
Push down carefully on the tail. Using a slow, controlled motion, push down on the tail with your back foot and distribute your weight evenly between both feet momentarily. Pushing down on the tail while your center of balance is situated over the rear wheels will cause them to act like a teeter-totter, raising the nose of the board. ^{[11]
X
Research source}
- Pushing down too hard or too fast will force the tail into the ground, killing your speed, at best, or resulting in a nasty spill.
- Lifting the nose to steer will probably feel pretty foreign at first. Practicing the “manual”, a skill that involves balancing on the back wheels while rolling or stationary, may help you get a feel for negotiating your weight on the tail. ^{[12]
  X
  Research source}
4
Redirect the nose to turn. From here, you can rotate the nose of the board in whichever direction you wish to turn. Guide the front end of the board with your lead foot and use a winding action of the shoulders and hips to swing the nose around. Using this technique will enable you to perform much sharper, more drastic turns, and will also come in handy for learning skills such as cornering, carving, etc. ^{[13]
X
Research source}
- These pivots will likely be smaller rotations, only a couple degrees, when you first start. It's called "tic tac toe." ^{[14]
  X
  Expert Source
  
  Jon Depoian
  Skateboarding Instructor
  
  Expert Interview. 5 June 2020.}
- Kick-turns can be used change the direction of the board up to about a 30 degree angle while moving. Any sharper than that and you’re likely to lose control.
- Be careful—the longer the front wheels stay off the ground, the greater the chance of the board flying out from under you.
5
Return the front wheels to the ground. Once you’ve completed the turn, shift your weight to your lead foot to set the front wheels back down on the ground. Make sure to touch down with the front wheels nice and easy to avoid clumsily dropping the nose or throwing yourself off balance. Keep riding, pushing off to generate more speed. Congrats! You’re now fully mobile!
- Both methods of turning, leaning and kick-turns, are essential basic techniques to master when you’re learning how to skate.

Expert Q&A

Search

Add New Question

Question

How do you turn on a skateboard?

Jon Depoian
Skateboarding Instructor
Jon Depoian is a Skateboarding Instructor and the Owner of Intro2Skateboarding, an organization based in Orange County, California that provides professional private, home-school, after-school, birthday party, and summer camp skateboard lessons for beginners and experienced skateboarders alike. Jon has over 21 years of skateboarding experience and over 10 years of skateboard instruction experience. He also has extensive experience producing street skateboarding videos and skating competitions.

Jon Depoian

Skateboarding Instructor

Expert Answer

If your trucks are looser, you can turn by leaning on your toes or heels. For sharper turns, you can do a kick turn. For those, you push on your tail, lift up your front foot, and do a pivot.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 11
Question

Can I practice on a road?

Elizabeth Milchefski

Community Answer

Yes, but make sure it is an abandoned or not busy road. If you are just starting out in skating and don't know how to turn away from a car quickly, that could result in something pretty bad. So practice on a road with caution.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 62
Question

Do I need wrist guards, or will elbow and knee pads suffice?

Elizabeth Milchefski

Community Answer

Elbow and knee pads should be sufficient, as long as you know how to fall on them.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 45

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Reader Videos

Submit a Video Tip!

Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!

Submit a Video

Tips

Practice, practice, practice. The more comfortable you get with each technique, the faster you will make progress.

Thanks
Helpful 0 Not Helpful 0
Try practicing kick-turns on a soft surface like grass or carpet before taking it to the street.

Thanks
Helpful 0 Not Helpful 0
For both turning methods, balance is key. Keep your body relaxed and responsive.

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

You need to be moving with a fair amount of speed to be able to turn effectively, but don't go too fast. High speeds will make learning new techniques more complicated and potentially dangerous.

Thanks
Helpful 14 Not Helpful 3
Falls will inevitably happen, especially when you're first starting out. Make sure you're wearing a helmet, along with other protective gear like knee pads, elbow pads and wrist guards.

Thanks
Helpful 8 Not Helpful 3

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

Expert Source

Jon Depoian
Skateboarding Instructor

[9]

[10]

[11]

[12]

[13]

[14]

Log in

How to Turn on a Skateboard

Things You Should Know

Steps

Leaning Into a Turn

Using the Tail to Kick-Turn

Expert Q&A

Reader Videos

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories