How to Fix a Fire Alarm Beeping All the Time: 6 Tips You Should Try

PDF download Download Article
Find out why your fire alarm is beeping after installing a new battery
PDF download Download Article

Is your fire alarm still beeping even though you put a new battery in it? The beeping signals that the alarm isn't working properly, allowing us to fix it before any issues arise. You might need to clear residual charge or replace the entire unit. Read on to learn more about getting your fire alarm working properly.

Fixing a Beeping Fire Alarm with a New Battery

To quickly fix this issue, clear residual charge or replace the unit. Remove the battery, then press and hold the "Reset" button for 15-30 seconds to reset it and drain any residual charge. Fire alarms and smoke detectors last 7-10 years, so replace them if they're that old.

Section 1 of 5:

Clearing Residual Charge

PDF download Download Article
  1. Clearing the residual charge is the first troubleshooting step after you replace the battery.
  2. 2
    Open the cover and take out the battery. Do this even if you just put a new battery in the alarm.
    Advertisement
  3. 3
    Press and hold the "Reset" button for 15-30 seconds. Doing so will completely reset the alarm and clear out the residual charge that's causing it to beep.
  4. 4
    Put the battery back in and close the battery compartment. If you haven't replaced the battery yet, do that now.
  5. 5
    Clean the unit of dust and debris. Any gunk on the outside or in the vents can also cause the fire alarm to beep, so clean it with a microfiber cloth or can of compressed air.
    • Vacuum the outside with a brush attachment to get any debris that won't clean using a cloth and canned air.
  6. 6
    Press the "Test" button before remounting the fire alarm on your ceiling or wall. The test will be loud, but it will let you know if your alarm is working properly or not. [1]
    7. Advertisement
Section 2 of 5:

When to Buy a New Fire Alarm

PDF download Download Article
  1. If clearing the residual charge did not stop the beeping, you might need to replace it. Check the manufacturing date on your alarm to see if it's expired; most units last 7-10 years after the manufacturing date.
Section 3 of 5:

Other Causes

PDF download Download Article
  1. In this case, your fire alarm may continue to beep (or chirp) once a minute for 15 minutes before resetting.
  2. 2
    Other devices make a similar noise. If you have a device like a weather radio, it might be making the same beeping noise if it's low on battery.
  3. 3
    The "new" batteries you replaced in the fire alarm might be old. If you stored the batteries for a while before putting them in the fire alarm, they might not have enough power to run the unit. Check the package for the batteries for a freshness date to make sure they are still good.
    • According to Firefighting Expert David Decker, you should replace them twice a year and test them once a month.
  4. 4
    Loose or improper battery placement. Your fire alarm will continue to beep if any of these criteria are met:
    • The battery isn't securely installed (it doesn't fit or it's backwards).
    • The battery compartment door won't close.
    • Battery connections may not be making good contact with the battery.
      • You can fix this by taking out the battery and putting it back in.
  5. 5
    Poor environmental conditions. Humidity, steam, and condensation will trigger false alarms. You also want to avoid placing the fire alarm in an area with excessive air flow, like near a vent, a ceiling fan, or an open window.
    • Fire alarms work best in 40-95 degrees Fahrenheit.
  6. 6
    AC interconnected alarms chirp every 5 seconds if grounded. The interconnect wire should not be grounded, so this chirp is meant to indicate that something is not right.
  7. There might be a loose or damaged wire that's restricting how much power the alarm is getting from your home's electrical system. In that case, it'll most likely use up the backup battery and chirp like it's low on battery charge. [2]
    8. Advertisement
Section 4 of 5:

Types of Fire Alarm Beeps

PDF download Download Article
  1. Your alarm will make different noises for different events. Here are the sounds you can hear:
    • Continuous beeps : The alarm will beep continuously if it detects smoke or fire. If you have one alarm in your fire alarm system, the fire or smoke is coming from that area; however, if you have multiple alarms on one system (think apartment building), the fire or smoke can be triggering any one of the alarms.
    • Single beeps : Hearing a beep once every 30 seconds or so usually indicates a battery issue. This can also signal to you to replace the unit, clean the sensors, or that it's grounded.
    • Multiple beeps : The frequency and amount of beeps you'll hear depend on the type of alarm you have. For example, you might hear 4 beeps if your fire alarm/smoke detector also has a carbon monoxide detector and detects something. If you have a First Alert detector, 3 beeps indicate the device is malfunctioning, and 5 beeps signal the unit has reached EOL and needs to be replaced.
      • However, for a Universal Security alarm, you'll hear 2 beeps, a 3-second pause, then 2 beeps again when smoke is detected.
Section 5 of 5:

FAQ

PDF download Download Article
  1. 1
    What is the normal lifespan of a smoke detector? Ideally, the detector will live 10 years. However, you should test it every month and replace the batteries every 6 months.
  2. 2
    Why does your alarm go off in the middle of the night? When the temperature in your house drops at night, power drains faster from your batteries, causing it to beep. But when the temperature rises during the day, the power draw from your battery decreases, which means the alarm doesn't beep during the day.
  3. 3
    Why does your alarm go off when you change the batteries? An alarm with new batteries will beep for about 10 seconds; that's the same for hardwired alarms when they receive more power. The beeping indicates that it detects a new power source.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Each manufacturer has different meanings for lights and chirps/short beeps; refer to your user manual for more specific help.
        Thanks
        Helpful 0 Not Helpful 0
      • For example, if you have a First Alert-branded smoke alarm, see this wikiHow article for some tips on beeping and chirping alarms.
        Thanks
        Helpful 0 Not Helpful 0
      • Working fire or smoke alarms are very important to have in a home – they can alert you to potential danger before you see it.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Disable a Fire Alarm
      3 Ways to Tell the Difference Between a Smoke and Carbon Monoxide Detector
      Why Is Your First Alert Smoke Alarm Beeping/Chirping?
      How to
      Fix a Beeping Fire Alarm: Low Battery & More
      Common Reasons Why a Fire Alarm Sounds 3 Times
      6 Troubleshooting Tips for a Randomly Beeping Fire Alarm
      Advertisement

      References

      1. ↑ http://support.firstalert.com/s/article/alarm-chirps-with-new-battery
      2. ↑ https://www.kidde.com/home-safety/en/us/support/help-center/browse-articles/articles/what_causes_intermittent_beeping_or_chirping_.html

      About This Article

      Thanks to all authors for creating a page that has been read 130 times.

      Did this article help you?

      Advertisement