How to Add Coolant to Your Car

PDF download Download Article
When and how often to top up your car’s coolant
PDF download Download Article

Having ample engine coolant is vital to keeping your car running smoothly. You'll need to top up your coolant reservoir, which is found under the hood and near the engine, once or twice a year, otherwise your car’s internal parts may become damaged. We’ll show you how to do just that, as well as fill you in on exactly when you’ll need to add or replace your coolant to keep your car ship-shape.

Things You Should Know

  • Turn your engine off and let it cool down for 15 minutes, then pop the hood and locate the coolant reservoir near the engine.
  • Uncap the coolant reservoir and use a funnel to add coolant to the reservoir up to the “MAX” or “FILL LINE” indicators on the side.
  • Replace the coolant cap and let the car idle for 5 minutes while you check the pipes and connectors on the reservoir for leaks.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Section 1 of 3:

Adding Coolant to Your Car

PDF download Download Article
  1. If you can, park on level ground to get a more accurate gauge of your coolant levels. Then, let the engine cool down for 15-20 minutes. Engines can get incredibly hot to the touch, and if you’re lacking coolant, the danger of a burn is only increased as your engine runs even hotter. [1]
    • While you’re waiting, check your car’s owner’s manual to see if it specifies a coolant type. Most cars can take any general-purpose coolant, but some are a bit pickier.
  2. Open your car’s hood (often by pulling a lever by your driver’s seat) and take a look at your engine block to find the coolant reservoir. Often, it’s a white, semi-translucent tank near the engine. [2] It’s sometimes labeled with “COOLANT,” a thermometer symbol, or just a warning not to touch it while it’s hot.
    • If you can’t locate your coolant reservoir, find your radiator instead. This is the grate at the front of your car which has a metal cap where you’ll add the coolant.
    • The coolant reservoir runs to your radiator, so it doesn’t really matter which you add the coolant to. That said, you’ll be able to add more coolant directly to the reservoir, which means you can go longer without topping up again.
    Advertisement
  3. Most reservoirs have labels on the side reading “MIN,” “MAX,” or, “FILL LINE,” which indicate the minimum amount of coolant you should have, the maximum amount, or to which level you’ll fill the reservoir, respectively. Compare the amount of coolant in your reservoir to these lines (the reservoir is semi-translucent for exactly this purpose). [3]
    • If your coolant is near the MIN line, or well beneath the FILL LINE, add more coolant immediately.
    • If your coolant is at or near the MAX or FILL LINE, there’s no need to add more, but check back in a few weeks to keep an eye on it.
    • There aren’t many situations in which your coolant is above the “MAX” line, unless you previously overfilled it. In which case, use a turkey baster to remove some.
  4. Unscrew or pop off the cap to the reservoir (make sure it’s totally cooled off, first), then, for easier application, place a funnel in the opening. Carefully pour coolant into the reservoir until the level reaches just below the MAX or FILL LINE. [4] Take care not to overfill it, which may cause damage to the reservoir.
    • You may hear some hissing as the pressure releases. If you do, pause for moment before it dissipates, then slowly continue to remove the cap.
    • If you’re adding coolant to the radiator instead, unscrew the radiator cap and pour coolant into the pipe until the coolant level sits just beneath the lip of the pipe’s opening, which indicates that the radiator is full.
  5. Let the engine run for about 5 minutes to let it take in new coolant. The coolant level in the reservoir may go down, but that’s normal. While the engine is running, examine the pipes and connections that lead to the reservoir, and take note of any apparent leaks. If you spot dripping liquid, take your car to a mechanic sometime in the next couple weeks to have it professionally examined.
    6. Advertisement
Section 2 of 3:

When do you need to check or add coolant?

PDF download Download Article
  1. If your engine is healthy and your car is running as usual, check your coolant once in the spring and once in the fall. [5] That way, you can add or replace your coolant before the hottest and coldest times of the year, protecting your car against extreme temperatures.
    • It helps to check your coolant every time you change your oil, since you’re already under the hood of your car.
  2. Keep an eye on the temperature gauge on your dashboard, just behind the steering wheel and marked with a thermometer symbol. If the needle on the gauge points to red, you might either be lacking coolant, or your car’s cooling system may be faulty. [6] Check the reservoir to see if the coolant is low. If there is coolant, but your car is running hot anyway, consult a mechanic immediately to diagnose the problem.
  3. Old coolant becomes acidic and can start to corrode your engine block and your coolant system. Use a coolant flush kit to drain your coolant, or have a mechanic replace your coolant, every 30,000 miles you drive. [7] This helps keep your car running efficiently, keeping the overall temperature in a healthy range.
    4. Advertisement
Section 3 of 3:

Coolant vs. Antifreeze

PDF download Download Article
  1. While the terms are often used interchangeably, they’re different things. Antifreeze is a solution that prevents other liquids from freezing. Coolant is a mixture of water and antifreeze—the water cools your engine, and the antifreeze keeps it from freezing in low temperatures. [8]
    • Antifreeze must be mixed with water before using it as a coolant. Many commercial antifreezes come premixed, in which case they’re labeled as “coolant.”
    • Antifreeze has no particular application on its own, and in fact many experts advise against adding pure antifreeze to any part of a car, since it may corrode the internal mechanisms.

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If your car is overheating but you don’t have any coolant, you can add just water to the reservoir, but only as a last resort—drive immediately to a mechanic. [9]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Pump Your Own Gas
      How to
      Add Oil to Your Car
      How to
      Add Windshield Washer Fluid to Your Vehicle
      What Happens if You Put Too Much Oil in a Car? Your Questions Answered
      How to
      Check Clutch Fluid Level
      How to
      Drain Your Car's Fuel Tank
      How to
      Change the Oil in Your Car
      How to
      Flush Power Steering Fluid
      How to
      Fill & Use a 2 Types of Gas Cans
      How to
      Change Transmission Fluid
      How to
      Get Gasoline Smell Out of Clothes
      How to
      Cap a Gas Line
      How to
      Make Ethanol Fuel at Home
      How to
      Use Starting Fluid
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance, check out our in-depth interview with Duston Maynes .

      References

      1. ↑ https://vehq.com/how-to-add-antifreeze/
      2. ↑ https://vehiclefreak.com/how-to-put-coolant-in-a-car-adding-antifreeze-the-right-way/
      3. ↑ https://youtu.be/42h6aK6O6K4?t=15
      4. ↑ https://vehq.com/how-to-add-antifreeze/
      5. ↑ https://theculturechronicle.com/how-often-should-i-add-antifreeze-to-my-car-.htm
      6. ↑ https://theculturechronicle.com/how-often-should-i-add-antifreeze-to-my-car-.htm
      7. ↑ https://vehq.com/how-to-add-antifreeze/
      8. ↑ https://vehiclefreak.com/how-to-put-coolant-in-a-car-adding-antifreeze-the-right-way/
      9. ↑ https://www.consumerreports.org/cro/news/2010/07/what-to-do-if-your-car-overheats/index.htm

      About This Article

      Thanks to all authors for creating a page that has been read 35,539 times.

      Reader Success Stories

      • Richella H.

        Apr 8

        "Helpful to know that old coolant turns acidic, and will corrode your block and coolant system. Thanks!"
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement