How to Size & Shorten a Metal Watch Band at Home

PDF download Download Article
Learn to resize your watch band and get the perfect fit
PDF download Download Article

Many wristwatches come with ready adjustable wristbands that are made of leather or plastic with holes and clasps for easy adjustment of the size. However, many designer brand watches and metal watch bands require the removal of metal links to adjust the size down. This may seem like a difficult task at first, but you can do this yourself at home with a few simple tools. Taking the watch to a jeweler or repair place isn't necessary and will cost you money.

Part 1
Part 1 of 2:

Sizing Your Watch

PDF download Download Article
  1. You will need to note how big the watch is. [1]
    • If the watch is very loose, you will have to remove lots of links.
    • If the watch is just slightly loose and you aren't in danger of it falling off, you might consider leaving it as is unless it is bothersome.
    • If your watch is too small, you will have to buy extra links from the manufacturer to make the band larger.
  2. Pinch the band evenly from the clasp until it is the proper size. [2]
    • Make sure you have an equal number of links on either side of the clasp that need to be removed.
    • This will make sure the watch itself stays centered on the wrist band.
    • Write down the number of links that need to be removed from either side of the clasp.
    Advertisement
  3. There are several things you will need to adjust your watch band. [3]
    • You will need one or two push pins. You will use these to push the pins that hold the links together out of their holes.
    • Get a pair of needle nosed pliers to help you remove the pins.
    • You will need a small jewelry hammer.
    • Make sure you are working on a flat surface with good lighting. You will need to collect any pins you remove from the band.
    4. Advertisement
Part 2
Part 2 of 2:

Removing Links from the Wristband

PDF download Download Article
  1. Be sure to leave about 1 ⁄ 2 centimeter (0.2 in) of space between the bottom of each removable link and the flat surface. [4]
    • Count up the number of links you will need to remove.
    • Find the pin holding the last link in place.
    • This is where you will remove the links.
  2. Watermark wikiHow to Adjust a Watch Band
    Use one of the pushpins to push out the pin holding the wristband link in place. [5]
    • Push the sharp end of the pushpin against the head of the link pin.
    • If it doesn't give, use your jewelry hammer to force the head of the pushpin into the hole for the link pin.
    • A small amount of the push pin should now be protruding from the other side of the link.
    • Use the hammer to drive the push pin in further to get more of the link pin out.
  3. Watermark wikiHow to Adjust a Watch Band
    You will have to pull forcefully to get the pin out. [6]
    • Once you have enough of the link pin out of the hole on the other side of the wrist band to grasp it with the pliers, you can use the pliers to get it out.
    • Grasp the end of the pin tightly with the needle nose pliers.
    • Pull it out.
    • The links you need from one side of the clasp should be removed now.
    • You need to repeat the process for the other side of the wrist band now.
  4. You will need to do this to put it back onto your wristband. [7]
    • Detach it using the same method you did for the links.
    • There should be a pin holding the clasp onto the links. Remove it using the hammer, pushpins, and pliers.
    • You will now re-attach the clasp to the wristband.
  5. Watermark wikiHow to Adjust a Watch Band
    Line up the link on the clasp with the last link on one side of your wristband. [8]
    • You should see a clear hole where a pin should go to hold the clasp on.
    • Take one of the pins you removed and insert it into this hole.
    • It should go most of the way in on its own, except for the last little bit on the end.
    • Use the hammer to gently pound the pin into the hole the whole way.
    • Repeat this process on the other side of the clasp.
    • Your watch band is now adjusted and assembled.
  6. It should now fit without being too big or too small. [9]
    • If you have over-adjusted the watch, try adding a link to each side of the watch band.
    • If you haven't taken enough links out, re-assess how many need to be removed for the watch band to be tight enough and comfortable.
    • Wear the watch for a few days to make sure its comfortable.
    7. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    Can I adjust a watch band without removing the links?
    Bill Green
    Jewelry & Watch Expert
    Bill Green is an Expert Jeweler and Appraiser. He is also the Founder & Creative Director of Jewelry & Timepiece Mechanix, and the Founder and Designer of Amaroo Handmade Opal Jewelry, based in Haddonfield, New Jersey. With over 40 years of industry knowledge, he and his team are known for restoring everything from new watches to vintage jewels and being one of the few shops that still design and make jewelry and watches. Jewelry & Timepiece Mechanix is part of the American Society of Jewelers and Gemologists and Ethical Metalsmiths. Bill studied at the Miami Jewelry Institute and the Gemological Institute of America as well as apprenticed with many accomplished craftspeople.
    Bill Green
    Jewelry & Watch Expert
    Expert Answer
    Yes, you can adjust a watch band without removing the links, depending on the type of watch. Some watches feature a snap-down deployment buckle with holes along the side. These holes indicate the positions where the bracelet can be adjusted using a spring bar mechanism. By depressing the spring bar and moving the buckle closer to the center, you effectively shorten the bracelet without removing any links. This method allows for minor adjustments to improve the fit. However, the availability of this feature varies depending on the watch model.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 14
  • Question
    What about watches with an arrow? Which way do I go?
    Community Answer
    Push the pin out in same direction that arrow points. Do the opposite when reassembling.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 48 Helpful 131
  • Question
    Can I add links to my watch? Because it's too tight.
    Community Answer
    Yes, that is perfectly possible. You may need to buy them from the manufacturer if you do not have any extra links.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 31 Helpful 55
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • Use a hard flat surface for this procedure, so as to minimize movement of the watch as you're trying to adjust it.
        Thanks
        Helpful 6 Not Helpful 6
      • If your watch band is too loose, and you're thinking of just throwing it away, why not sell it instead? You'll make some of the money back towards a new watch.
        Thanks
        Helpful 5 Not Helpful 7

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • If you don't have a watch holder, trace the outline of your watch on a piece of foam and cut it out. This will hold your watch in place so you can see the top of the pin.
      • If you don't have a pushpin, you can use a sewing needle to push out the pin holding the watch link in place.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Push pins
      • Hammer
      • Needle nosed pliers
      • Watch with adjustable band

      You Might Also Like

      How to
      Change 4 Different Watch Band Styles
      How to
      Size a Casio Metal Wristband
      How to
      Adjust a Watch Band
      3 Easy Ways to Open the Back of a Watch With Household Items
      How to
      Set the Time and Date on a Digital Watch
      How to
      Set the Time & Date on Your Armitron Watch
      How to
      Fix a Fast-Draining Apple Watch Battery: 14 Ways
      How to
      Change a Watch Battery
      How to
      Set the Time on a Baby G Watch
      How to
      Tell if a Rolex is Real or Fake: 11 Signs of Authenticity
      How to
      Remove Scratches from Watch Glass
      How to
      Measure Wrist Size
      How to
      Wear a Watch
      How to
      Find Bulova Model Number
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about watch repair, check out our in-depth interview with Bill Green .

      References

      1. ↑ https://youtu.be/TaSqbEuc4i8?t=24
      2. ↑ https://youtu.be/blI063pLuuI?t=180
      3. ↑ https://youtu.be/o3NfebIjLlU?t=29
      4. ↑ https://youtu.be/o3NfebIjLlU?t=60
      5. ↑ https://youtu.be/o3NfebIjLlU?t=75
      6. ↑ https://youtu.be/blI063pLuuI?t=340
      7. ↑ https://youtu.be/blI063pLuuI?t=540
      8. ↑ https://youtu.be/blI063pLuuI?t=600
      9. ↑ https://youtu.be/TaSqbEuc4i8?t=293

      About This Article

      Article Summary X

      To adjust your watch band, first put your watch on and squeeze the links together around the clasp to count how many links you need to remove. Then, take your watch off and lay it flat. Find the small opening on the side of the first link you want to remove. Slide a pushpin into the opening of that link until the pin holding the band in place sticks out of the other side. You may need to tap the back of the pushpin with a rubber mallet or small hammer. Grab the portion of the pin that’s sticking out with a pair of pliers and pull it out of the link to unlock that side of the band. Then, repeat the process on the next opening to unlock the link from the band entirely. Once you've removed enough links, slide the 2 open links together. Slide one of the pins you removed into the hole over the clasp where the 2 links meet. Push it back into place or tap the back with a rubber mallet to finish adjusting your watch band. For tips on getting the clasp back on your watch band, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,701,539 times.

      Reader Success Stories

      • Zoraya Martinez

        Jul 10, 2018

        "I work in a department store and was transferred from the men's department to the jewelry department, so I am ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement