PDF download Download Article PDF download Download Article

Weathered wood is appealing and beautiful in its own rustic way. It can be expensive to buy, but luckily it's cheap and easy to do yourself! In this article, we'll teach you how to age wood using vinegar and steel wool to get that weathered effect on your own at home. Let's get started!

Part 1
Part 1 of 3:

Preparing to Make Your Stain

PDF download Download Article
  1. This is a fairly simple process that requires minimal supplies. You may already have them at home. If not, you should be able to find everything you need at a dollar store, grocery store, or somewhere like Target or Walmart.
    • White distilled vinegar. Any brand will do.
    • Steel wool. Fine graded is ideal because it disintegrates best, but any grade will work. [1]
    • A container of some sort. This can be a bucket, a jar, a pot, a bowl, or whatever else you have on hand. If you dislike the smell of vinegar you may want to opt for a container you can close while the mixture sits, particularly if you want it to get quite dark, as this will involve letting it sit for a while.
    • Rubber gloves. These are optional, but a good idea if you are concerned about cutting your fingers on the steel wool, or if you plan on making a particularly dark solution that might stain your fingers.
    • A strainer. This is also optional, as you can apply the stain straight from whatever container you made it in. This will come in handy if you want to transfer the liquid to another container to store and use again later.
    • A paintbrush.
  2. Some woods will work better than others. You don’t want to go to the trouble of making a stain only to discover that it won’t stain. [2]
    • Wood with bifurcated grains is best, particularly where the wood grain is layered in hard/soft layers, so the soft layers are affected by the process but the hard layers are not, causing the wood to look old.
    • Softwoods are easier to work with than hardwoods. Southern yellow pine, western cedar, and fir are excellent candidates for aging. Red oak, maple, or other slow-growing, tightly grained woods are not. [3]
    • Hardwoods with a distinct grain, such as hickory, white oak, elm, or ash, can also work well. [4]
    • This method is not appropriate for laminate flooring, as the vinegar will likely cause the glue holding the layers together to fall apart.
    Advertisement
  3. Stains made with steel wool and vinegar range from a reddish, rusty brown, to a very dark, burnt brown. They also range in intensity from very subtle, to very intense. These factors are influenced by the ratio of steel wool to vinegar, and by how long you let the mixture sit. Before you begin, decide approximately color stain you want to create, and plan accordingly.
    • The color of the stain is determined by how long it sits. Stain soaked for just a couple days will have a dark, burnt tone. The longer it sits, the rustier in color it will become. [5]
    • The intensity of the stain is determined both by how many steel wool pads you use, and how long you let the mixture sit. 1-3 steel wool pads to a half-gallon of vinegar should work for most projects. If you want your stain to darken faster, try adding another steel wool pad. If it becomes too dark, simply dilute it with water.
  4. Advertisement
Part 2
Part 2 of 3:

Making Your Stain

PDF download Download Article
  1. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    This step is not strictly required, but it will help the disintegration process and speed things up. You will want to wear plastic gloves to avoid cutting your fingers. Break apart the steel wool pads, and put the pieces in the container you are mixing your stain in.
  2. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    This is pretty straightforward. Just pour the vinegar over the steel wool. Give it a good mix, and put the cover on. [6]
  3. You can create a very subtle stain in just 15 minutes or so, but you will probably want to wait longer. 2-4 days will make a stain suitable for most projects, but you can let the mixture steep for months at a time to create a more dramatic effect. [7]
  4. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    This is an optional step and is more important if you plan on storing the stain for later use. When it reaches the color you want, you can pour the mixture through a colander and into a new, sealable container. You can also use it straight from whatever container it is in.
  5. Advertisement
Part 3
Part 3 of 3:

Applying Your Stain

PDF download Download Article
  1. Without knowing what your stain looks like when applied, you might not want to brush it onto your furniture just yet. Brush some onto a scrap piece of the same sort of wood, or a part of whatever you are staining that is not usually visible, and wait an hour. If you don’t like the color you end up with, make adjustments to your mixture; add more steel wool or wait longer if you want it to be darker, wait longer if you want it to be redder, or dilute it with water if you want it to be more subtle. [8]
  2. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    Sanding your wood down before painting it can give it an even more dramatically weathered look. This step is optional, and your stain should look good with or without it. It’s just a matter of what effect you want to achieve. [9]
  3. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    There is no particular technique necessary for this. Brush in the direction of the grain, coating it evenly, and let it sit to allow the stain to penetrate the wood. [10] Then just let it dry, and sit back and admire your work.
  4. Watermark wikiHow to Age Wood With Vinegar and Steel Wool
    You can choose whether or not to do this based on how you want the final product to look. For a polished sheen, wait for the wood to dry completely, brush on the wax, let it dry for an hour, and polish it with a towel. If you want a more natural, weather-beaten look, skip this step.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Does the wood smell like vinegar after it has dried?
    Community Answer
    It may, but you can remedy the problem by sealing the vinegar stained item with either shellac or polyurethane.
  • Question
    Will it work on stained wood I haven't sealed it yet?
    Community Answer
    Yes, it will make any knot or grain run darker.
  • Question
    Can the stain be applied to painted wood, or does it have to be sanded?
    Community Answer
    As opposed to paints, most stains work by slightly penetrating the wood. You might get some effect on top of paint, but it likely won't be as dark, and may rub off easily, depending on the underlying paint.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      Fill a mason jar with a steel wool sponge and white distilled vinegar and let it sit for 2-4 days. Once you’ve strained the jar, your stain is ready to use! Use a brush to evenly coat the wood. For additional advice on how to create an aged look, read on...

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,968,435 times.

      Reader Success Stories

      • Sharyn Inzunza

        Apr 26, 2016

        "Great post. The videos and description were perfect. I'm returning the commercial stain I bought and will use ..." more
      Share your story

      Did this article help you?

      Advertisement