How to Apply Clear Coat on Wood

PDF download Download Article
PDF download Download Article

Applying a clear finish to wood brings out the wood’s natural beauty, while sealing and protecting the wood’s surface. Oil-based polyurethane is an excellent product to use for this purpose. Start by sanding the surface thoroughly and wiping it down to remove any dust. Create a homemade sealer by thinning the polyurethane with mineral spirits and use this for your first coat. Follow up with 2 coats of undiluted polyurethane straight from the can. Sand the surface once more, then apply your final clear coat.

Part 1
Part 1 of 4:

Sanding and Cleaning the Surface

PDF download Download Article
  1. In order to properly apply a clear coat to wood, you want to work in an environment with as little dust as possible. Good lighting, such as natural light or bright artificial light, will enable you watch out for streaks and bubbles in your work. [1]
  2. Watermark wikiHow to Apply Clear Coat on Wood
    Use 80 or 100-grit sandpaper to lightly go over the entire surface of your project, taking care to get into the nooks and crannies. Use medium grit sandpaper to eliminate any major scratches, notches, or blemishes in the wood. [4]
    • If you're working on a very large project, you may want to use an electric sander or sanding block to get the job done.
    • You can use sanding sponges for corners and complex areas where a power sander cannot reach. [5] [6]
    • Wear protective gear if you use power tools. [7] [8]
    Advertisement
  3. Watermark wikiHow to Apply Clear Coat on Wood
    After smoothing out the larger blemishes with medium grit sandpaper, use fine 100-grit sandpaper to level and smooth the surface. Follow that up with an extra-fine 220-grit sandpaper to create the smoothest surface possible. [9] [10]
    • The smoother the surface, the better your clear coat will adhere and look.
  4. Watermark wikiHow to Apply Clear Coat on Wood
    Use a vacuum with a soft bristle attachment to get rid of all the dust on your project's surface. Vacuum the area around the project, as well. It's important that you rid the area of all dust generated by your sanding. Otherwise, that dust can end up trapped and visible beneath the clear coat. [11]
  5. Watermark wikiHow to Apply Clear Coat on Wood
    Use a lint-free cloth to ensure no traces of the cloth's material are left behind. Dampen the cloth with mineral spirits and wipe down the entire surface. Be sure to get into the nooks and crannies. Then go over the surface one final time with a dry tack cloth. [12]
    6. Advertisement
Part 2
Part 2 of 4:

Sealing the Surface

PDF download Download Article
  1. Oil-based polyurethane in a satin sheen is an excellent all-purpose clear coat that is relatively easy to apply. Purchase this and your foam brush at a hardware or home improvement store. [13]
    • Foam brushes are recommended because they are inexpensive, and you can toss them out when you’re done.
    • Natural bristle brushes are also a great choice, although they are more expensive and not disposable.
  2. Watermark wikiHow to Apply Clear Coat on Wood
    You can create your own homemade sealer by thinning the polyurethane with paint thinner. Stir the polyurethane well, then combine it with the mineral spirits in a glass jar or plastic bucket. Stir gently with a wooden wand to combine the ingredients.
    • Creating a homemade sealer is the easiest and most economical choice.
  3. Watermark wikiHow to Apply Clear Coat on Wood
    Dip your brush into the sealer to load it with product. Starting on 1 side of your project and working systematically to the other side, brush on the sealer with long, even strokes. [14]
    • Watch for dripping. If you notice any drips, brush over them to smooth them out.
  4. Because the sealer is pretty thin, dripping can be a problem. You definitely don't want any drips to dry on the surface, since this will disturb your smooth finish. Give the coat of sealer about 5 minutes to dry, then examine the surface once more for drips. Smooth out any that you see with your brush. [15]
    • Leave this to cure for 12-24 hours.
    5. Advertisement
Part 3
Part 3 of 4:

Applying the First 2 Coats

PDF download Download Article
  1. Watermark wikiHow to Apply Clear Coat on Wood
    Dunk your brush into the full-strength polyurethane and brush it onto the surface. Start on 1 side of the project and work systematically to the other side. Use long, even strokes. Stretch out the finish as thin as possible. [16]
  2. Watermark wikiHow to Apply Clear Coat on Wood
    Once the entire surface is wet with your first coat, go back over it with another coat of full-strength polyurethane straight from the can. Use long, even strokes. Overlap each stroke to ensure smoothness. [20]
    • Watch for any drips and smooth them out with your brush as they occur.
  3. Wait 5 minutes after application and then examine the surface a final time for drips. If you find any, use your brush to smooth them out. Before moving on to your final coat, let the first 2 cure completely over a 24 hour period.
    • Make sure the surface is fully dry to the touch before proceeding.
    4. Advertisement
Part 4
Part 4 of 4:

Applying the Final Coat

PDF download Download Article
  1. Watermark wikiHow to Apply Clear Coat on Wood
    Rub the sandpaper over the surface of your wood until it feels smooth to the touch. Inspect the surface closely and smooth out any major bubbles, specks, and runs. You want the wood to be as smooth as possible before adding the last coat of polyurethane. [21]
  2. Watermark wikiHow to Apply Clear Coat on Wood
    A tack rag is a sticky cloth that you can purchase at home improvement stores. Use it to remove as much sanding dust as you can from the surface. The smoother the surface, the better the project will look after the final coat. [22]
    • If you don’t have a tack rag, you can use a moistened lint-free cloth or a vacuum cleaner.
  3. Watermark wikiHow to Apply Clear Coat on Wood
    Just as you did with the initial coats, brush the polyurethane onto the surface, working systematically from one side of the project to the other. Pop any bubbles you see by brushing back over the finish. Move in the direction of the wood grain. [23]
    • Always stretch the polyurethane as thin as you can.
    • Let the surface cure for 24 hours.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I get a smooth clear coat finish on wood?
    William & Shannon Latil
    Furniture Refinishing & Home Remodeling Specialists
    William & Shannon Latil are Furniture Refinishing & Home Remodeling Specialists and the Founders of Furniture Refinishing Services based in Houston, Texas. With over 30 years of experience, William and Shannon specialize in repairing and restoring wood furniture, refinishing kitchen cabinets, remodeling kitchens, and building live-edge wooden tables. William and Shannon have won Awards for Excellence from the Better Business Bureau and the Houston Chronicle Best Small Business Award. Their work has also been featured in Houston Press Magazine - Kitchen Design. Additionally, the Furniture Refinishing Services team has conducted major refinishing work on venues such as NRG Stadium and Minute Maid Park.
    William & Shannon Latil
    Furniture Refinishing & Home Remodeling Specialists
    Expert Answer
    Sanding the wood will leave it very, very smooth to the touch. In order to not rash, make sure you apply the finish evenly over the entire piece — if you apply too much finish, it will be too tick and will rash.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 3
  • Question
    What's the difference between clear coat and varnish?
    Community Answer
    Varnish is usually used on wood and is made of resins, oils and solvents. It typically dries with a glossy finish. Clear coat may be used on cars or wood to protect paint and add shine. It is composed of a resin base and a hardener. Clear coat is harder and more durable, while varnish is softer.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    What does "rash" mean? I just had wall-to-wall bookcases built, and they look very nice. However, I failed to finish the shelves, and they are rough to the touch. A handyman stained the cases.
    Snakey006550
    Top Answerer
    "Rash" likely refers to a rough or uneven texture on the wood, caused by not properly sanding the shelves before staining or sealing them. The roughness could also result from the wood grain raising after staining. To fix this, lightly sand the rough surfaces with fine-grit sandpaper and then apply a clear finish, such as polyurethane, to smooth and protect the shelves.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Oil-based polyurethane
      • Foam or natural bristle brush
      • Clean bucket or glass jar
      • Paint thinner
      • Lint-free cloth
      • Wooden wand or stirrer
      • 100-grit sandpaper
      • 150-grit sandpaper
      • 220-grit sandpaper
      • 280-grit sandpaper
      • Tack rag (or vacuum cleaner)

      You Might Also Like

      How to
      Restore Wooden Furniture
      How to
      Tie Chair Sashes
      How to
      Refinish a Coffee Table
      How to
      Stain Veneer
      How to
      Wax Furniture
      How to
      Refinish a Desk
      How to
      Oil Teak Furniture
      How to
      Remove Shellac
      How to
      Remove Wood Stain
      The Easiest Way to Lacquer Furniture Yourself
      How to
      Decoupage a Table
      How to
      Cover Furniture with Wallpaper: DIY Furniture Makeover Tips
      How to
      Clean Shellac
      How to
      Sandblast Cabinets
      Advertisement

      References

      1. ↑ https://www.popularwoodworking.com/techniques/finishing/finishing-for-first-timers
      2. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      3. ↑ William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
      4. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      5. ↑ https://thediyplan.com/what-is-a-sanding-sponge/
      6. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 10 August 2021.
      7. ↑ https://www.mymove.com/home-inspiration/painting/remove-paint-from-wood/
      8. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 10 August 2021.
      9. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      1. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 10 August 2021.
      2. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      3. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      4. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      5. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      6. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      7. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      8. ↑ William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
      9. ↑ https://www.popularwoodworking.com/techniques/finishing/finishing-for-first-timers
      10. ↑ William & Shannon Latil. Furniture Refinishing & Home Remodeling Specialists. Expert Interview. 29 October 2021.
      11. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      12. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      13. ↑ https://www.familyhandyman.com/project/how-to-apply-polyurethane/
      14. ↑ https://www.thisoldhouse.com/ideas/all-about-polyurethane

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 81,940 times.

      Did this article help you?

      Advertisement