PDF download Download Article PDF download Download Article

Loose powder sets your makeup and extends its life, so you look as fresh at the end of the day as you did at the start. You should begin by choosing a powder that provides the coverage you like. Apply your powder with a powder brush for a natural, dewy look. Loose powder applied with a Beauty Blender will give you full coverage. Apply your loose powder with a powder puff for a matte finish.

Method 1
Method 1 of 4:

Choosing Your Powder

PDF download Download Article
  1. A translucent powder will set your makeup without adding too much more coverage. This is a great option for setting your everyday makeup because it will look more natural. [1]
  2. Loose powder that matches your skin tone can correct any unevenness in skin tone. It can also brighten your face and correct redness. If you’re going to be in photographs or want to look more professionally done up, use a colored powder. [2]
    Advertisement
  3. When your loose powder meets the oils in your skin, it can oxidize, turning a slightly darker shade. If your skin is naturally oily, choose a loose powder a shade or half a shade lighter than your natural skin tone. [3]
  4. If you have dry skin or combination skin (sometimes oily, sometimes dry), you’re fine using a powder that matches your skin tone. It won’t oxidize and should maintain its color. [4]
  5. Advertisement
Method 2
Method 2 of 4:

Applying Powder with a Brush for a Dewy Look

PDF download Download Article
  1. Dipping your applicator directly into the container of powder risks spilling the powder everywhere. Instead, shake a bit of loose powder into the top and set the container aside. You can add more powder to the lid if you need it. [5]
  2. A kabuki brush, which has a large surface area and dense bristles, is best for applying loose powder. The size doesn't matter as much as the type of brush. Don’t smash the brush into the powder. Gently dip the tip of the brush into the powder, only covering the top of the brush. [6]
  3. This removes the excess powder from the top of the brush and works the powder into the bristles. You can also hold the brush vertically and tap the end of your brush on a hard surface to work the powder further into the bristles. [7]
  4. Use small circular motions to apply the powder to your T-zone, moving across your forehead and then down your nose. Continue to buff the powder onto your face, moving toward your hairline. When you’re finished, you shouldn’t see any lines in the powder or your makeup. [8]
    • You may need to reload the brush with powder a second time. If the bristles of the brush feel scratchy on your face, you need more powder.
  5. Reserve a brush just for removing loose powder. Once you’re done applying your powder, brush the clean brush lightly over your face. It will remove the powder without taking off your foundation. [9]
    • A blush or powder brush is best for removing excess powder. The size doesn't matter as long as you're using the right type of brush.
    • If you’re not sure if you’ve removed all of the excess powder, take a selfie using the flash on your smartphone. Any loose powder will show up as white splotches on your face.
  6. Advertisement
Method 3
Method 3 of 4:

Using a Makeup Sponge for Full Coverage

PDF download Download Article
  1. The sponge shouldn’t be dripping wet, but it shouldn’t be totally dry, either. If you have a small water bottle, you can spray the Blender a few times. Or you can run it quickly under water and then squeeze it out.
    • The water should be room temperature.
  2. You should only dip the tip of the sponge, up to about a third of the way down the sponge, into the powder. You can add more later if you need it, but if you start with too much, the powder can look caked on.
  3. Pressing the powder under your eyes will help set any concealer you have on. Press the sponge along your T-zone and the rest of your face to set your foundation. Then use small dabbing motions to press the powder onto the rest of your face.
  4. If you notice that while you're pressing the sponge to your face, no powder is transferring to your face, you need to reload the sponge. If you've put on too much powder, wet a clean sponge and press it gently against your face. It should remove some of the loose powder.
  5. Advertisement
Method 4
Method 4 of 4:

Using a Powder Puff for a Matte Finish

PDF download Download Article
  1. A powder puff is a flat, puffy pad that comes in some powder compacts. It's usually palm-sized. To use, add a generous amount of powder to the puff. Dip it into the powder and don’t knock the excess off by tapping the puff against the lid. [10]
    • If you're buying your own powder puff, look for one that's about the size of your palm.
  2. Applying the powder lightly at first will prevent the puff from smudging your makeup. Tap the puff lightly all over your face. Then press more firmly after a light layer has been applied. [11]
  3. If you’re applying powder under your eyes or around your nose, fold the puff in half. Then apply the powder as usual. A smaller puff gives you more control and prevents you from getting powder in places you don’t want it. [12]
  4. Run the back of your hand against your face. If your cheek feels smooth and dry, you’ve applied just enough powder. If your face still feels wet or sticky, apply a bit more powder. [13]
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      Applying loose powder helps to set your makeup and keep it looking fresh for longer. To get a dewy look, first shake a little powder into the lid. Then, dip your makeup brush into the powder and tap it against the lid to remove any excess. Buff your face with the brush in small, circular motions. When you’ve finished, lightly brush your face with a clean brush to remove any excess powder. For a full-coverage look, dip a damp makeup sponge into the powder and use small dabbing motions to transfer the powder to your face. You might need to dip the sponge in your powder again a few times if it runs out. For more tips from our Beauty co-author, including how to use a powder puff to get a matte finish, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 103,235 times.

      Did this article help you?

      Advertisement