How to Bait a Fishing Hook

PDF download Download Article
An in-depth guide to baiting your hook with all types of bait
PDF download Download Article

Learn how to attach every common type of bait to your fishing hook! Some guidelines for when to use each one are included, but be sure to ask an experienced fishermen or bait shop employee for more specific local knowledge. Read on to learn every technique from threading a worm to creating a long-lasting bridle for live fish bait.

Method 1
Method 1 of 4:

Using Live Bait

PDF download Download Article
  1. This bait is widely used in many types of fishing. Use earthworms or manure worms in freshwater and bloodworms or sandworms in saltwater. Mealworms and other live grubs are usually used for trout or bass.
    • Pierce through several smaller worms or cut up worm halves to hide the hook in a mass of wriggling worms. Some hooks come with smaller hooks attached to the side for this purpose.
    • For large worms, thread a single worm along the hook until the hook is mostly or completely hidden.
    • For very large worms, pierce the hook through several points of the body. Leave a length at the end to wriggle and attract fish.
  2. Many fish feed on minnow, but make sure you pick a size appropriate for your target fish to eat. Sardines also make great bait and attract most fish. [1] Ask at the bait shop what kind of local fish your target eats, too.
    • If you are dragging the bait behind you in a moving boat (trolling), hook the fish under its jaw and exit through the top, or just through its upper jaw for especially large bait fish. Alternatively, you can hook it through both nostrils. Any of these hook methods will maximize the fish's ability to swim with a natural motion to attract predator fish. [2]
    • For fishing while still or moving slowly, hook the bait fish on its back just in front of the dorsal fin. Hook it underneath the spine to avoid paralyzing it. This forces the fish to swim more frantically and head-downwards, attracting attention. You can fine tune the depth by placing it further ahead of the dorsal fin; this causes it to swim at a shallower downward angle.
    • If you are freelining (fishing while stationary, using no floats or weights), you can hook the bait near the tail to make it swim forward. To force it to swim downward instead, hook into the mouth and exit through the gills. [3]
    Advertisement
  3. Fish that are attracted to crayfish bait include smallmouth bass, catfish, and walleye.
    • Thread the hook shallowly through the back or front of the crayfish, pushing it out again on the same side. Don't go any deeper than necessary to get under the main shell segment, or you may kill the crayfish.
    • Alternatively, thread the hook through the meaty tail. This can hide most of the hook and will not hit any of the crayfish's vital organs. Start at the end of the tail and push the hook out just before the body.
  4. Shrimp are a common, cheap bait that many inshore fish varieties feed on, including redfish, jacks, and grouper. [4] [5] These are similar in anatomy to crayfish, but you may need to use a thinner hook for small varieties.
    • Hook shallowly through the body or through the meat of the tail.
    • Remove a few segments of shell so the shrimp scent is stronger.
  5. During the summer when insects are plentiful, fishermen can simply catch adults from the ground or young nymphs from under the water surface to guarantee bait that's part of the local fish diet. Trout are especially attracted to insects. [6]
    • Insects should be handled carefully, as they area easily killed while baiting.
    • Tie a flexible thin wire to the shank of the hook, then wrap it carefully around the insect to affix it to the hooked section.
    • If you can't affix it with wire, hook through the rear section of the body. The vital organs are mostly in the front and should be avoided. It doesn't matter which direction the insect is facing.
    6. Advertisement
Method 2
Method 2 of 4:

Using Dead or Artificial Bait

PDF download Download Article
  1. This includes many saltwater fish such as sea trout and bluefish, as well as freshwater bottom feeders such as carp and catfish. [7]
    • If you are fishing from one spot (still fishing), cut the fish into chunks thick enough to hide most of the hook.
    • If you are dragging the fishing line behind a moving boat (trolling), cut the fish into long, thin V-shaped strips. Pierce the hook through the thicker end so the moving strip imitates a swimming fish.
  2. Any fish that hunts crayfish, such as pike or catfish, can be attracted by a severed tail with the hook pushed along the length of the meaty center. The same hooking process can be used to attract shoreline fish with a shrimp tail bait.
  3. Commercial doughball paste can be purchased in labeled varieties that attract bass, trout, or another specific species. You can also make your own by boiling hot water, flour, cornmeal, and molasses for a few minutes and letting it cool. Fishermen add anything from cheese to garlic to this recipe in their efforts to attract an individual fish species.
    • Form the paste into a ball over the entire hook. Press it into place so the hook is hidden completely. Some hooks include wire springs to help keep the doughball in place.
  4. Shellfish are great for attracting fish in their native area. Clams, mussels, liver, and other soft meat should be left out in the sun to harden before use, or else frozen beforehand and used when partially thawed.
    • Once the meat is hardened, pierce the hook through it in as many different places as possible. Hide the end of the hook in the meat.
    • If it still won't adhere to the hook or you suspect a fish could peel it right off, use fine thread or wire to tie it on.
  5. You can find artificial lures that sink, float, or stay just under the surface. In addition to customizing for your fish's habits, you can find artificial bait intended to attract a specific species by smell or appearance.
    • In order to hook a standard artificial "grub," thread the hook through the mouth of the bait until the front reaches the eye of the hook. Push the end of the hook out through the grub's stomach.
    6. Advertisement
Method 3
Method 3 of 4:

Making a Bridle

PDF download Download Article
  1. A bridle is tied between the hook and the bait fish in order to keep the bait fish alive for a long time and to increase the chance of a good hook, since it is difficult to pull the bridle off.
    • Bridling is most often used in saltwater fishing to catch larger fish, since the proportionally larger bait fish is less replaceable and more easily manipulated.
  2. A thick cord of Dacron (also called Terylene or Lavsan outside the U.S.) works well. [8] Don't use thin cord as this can cut right through the bait fish.
  3. Tie the ends of the line together . Make a loop with 1/4" to 1/2" (6mm to 12mm) ends, or "tags", sticking out.
  4. Yank both ends of the loop to fasten the knot as tight as possible without pulling the tags through.
  5. Hold the lighter flame over the two ends until they are melted enough that they cannot pass through the knot.
    • Pull your loop as hard as you can to make sure it doesn't come apart.
  6. . Place the fishing hook on top of your bridle, resting on a flat surface. Follow the next few steps to secure the two together if you don't know how to tie a "cow hitch".
    • The knot end should be positioned a short distance above the bottom of the hook's "J" shape (or the base of the "O" for a circle hook), with the rest of the bridle passing underneath the hook and extending below the J.
  7. It should pass above the J bend of the fishing hook and between the two sides of line next to the knot end.
  8. Pull the slack out of the line so it is tight against the J bend of the fishing hook.
  9. . Loop the side nearest to the hook end over the hook point and pull it tight against the knot. This keeps it from sliding along the hook.
    • Make a second "hitch" like this if you want to make it extra secure.
  10. Many fishermen prepare bridles and hooks of several sizes so they are prepared for any size bait fish they happen to catch. You can also bring your own in a bait tank or practice on dead bait to get the hang of it.
    11. Advertisement
Method 4
Method 4 of 4:

Bridling Live Bait

PDF download Download Article
  1. If the live bait needs to remain alive and natural looking for as long as possible, you can attach it with a secure bridle rather than a damaging hook.
    • Have a more experienced fisher make a bridle for you, or follow the instructions for Making a Bridle to create your own.
  2. You can do this through the eye sockets above or in front of the eyes (not through them), or through a hole in its back near the head. [9]
    • You can use an open eye live bait needle instead of a crochet needle.
  3. Use the end of the needle to catch the loop end of the bridle and draw it through the fish.
    • Keep hold of the loop so the fish's wriggling doesn't pull it back out again.
  4. You should now be able to let go of the line and just keep hold the hook and fish.
  5. This takes up slack in the line and brings the hook closer to the fish. Do this until there's only a small gap between the fish's head and the twists in the line.
  6. Thread the hook point between the two sides of the loop, just above the fish's head.
  7. If the bridle rig was made correctly, you should be able to use your live bait for hours without it escaping or dying. But let's hope you catch something before then!
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the best bait to catch fish?
    Michael Reynolds
    Professional Fishing Instructor
    Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW).
    Michael Reynolds
    Professional Fishing Instructor
    Expert Answer
    Try using something like shrimp, squid, or sardines to successfully catch fish.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
  • Question
    How do I prevent getting caught in the grass in the canal?
    Community Answer
    Use a weedless Texas rig for artificial and a helicopter rig for live bait.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If your bait keeps coming off your hook, switch to a hook with more barbs, or one better suited in size and shape to your fishing purpose.
        Thanks
        Helpful 2 Not Helpful 0
      • Ask someone at the bait shop if you're not sure what kind of bait to use in your area.
        Thanks
        Helpful 1 Not Helpful 0
      • Keep your fishing rod secure and let out enough fishing line that you can easily hold the hook.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use local live bait only and do not release excess bait in order to preserve the local environment.
        Thanks
        Helpful 0 Not Helpful 2
      Advertisement

      Things You'll Need

      • Bait (any type)
      • Hook
      • Gloves (If you prefer not to get your hands dirty)
      • Knife & chopping board (for cut bait)

      Making the Bridle:

      • Thick fishing line
      • Crochet hook or open eye live bait needle
      • Lighter (optional)

      You Might Also Like

      How to
      Bait a Hook with a Worm
      How to
      Tie a Palomar Knot
      How to
      Tie A Hook on a Line: A Guide to 10 Useful Knots
      How to
      Tie a Leader to the Main Line
      How to
      Use a Baitcaster
      How to
      Grow Your Own Fishing Worms
      How to
      Keep Fishing Worms Alive for Fishing
      How to
      Make Fish Bait Without Worms
      How to
      Keep Minnows Alive
      How to
      Texas Rig a Plastic Worm
      3 Simple Ways to Make Your Own Carp Bait
      How to
      Make Fish Bait Using Bread
      Advertisement

      References

      1. ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview. 26 February 2021.
      2. ↑ https://www.saltwatersportsman.com/how-to-hook-live-bait/
      3. ↑ https://www.saltwatersportsman.com/how-to-hook-live-bait/
      4. ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview. 26 February 2021.
      5. ↑ https://www.saltwatersportsman.com/how-to-rig-live-shrimp/
      6. ↑ https://www.trailervalet.com/blog/a-guide-to-freshwater-fishing-baits/
      7. ↑ https://www.mapquest.com/travel/outdoor-activities/fishing/fish-conservation/responsible-fishing/how-to-choose-bait-when-fishing.htm
      8. ↑ https://www.leadertec.com/tipsandtechniques/rigging_natural_baits/bridle_rig.html
      9. ↑ https://www.bdoutdoors.com/fishing/how-to-fish/offshore-acadeymy-bridle-bait/

      About This Article

      Article Summary X

      To bait a fishing hook, start by tying a loop at the end of some fishing line. Then, pass the loop end up over the fishing hook and under the knot, pulling the slack out of the line so it's tight against the hook. Next, wrap the loop around the hook one more time and pull it tight to secure it in place. When you're ready to attach your live bait, hook a needle onto the loop and pull the loop through the live bait in its back. Finally, bring the loop over the end of the fish hook and twist the line to secure the bait to the hook. To learn how to choose the best bait for fishing, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 190,334 times.

      Reader Success Stories

      • J. R. Smith

        Oct 10, 2016

        "I had never heard of bridle baiting! I will try soon. I use live and cut bait when fishing for catfish. Thanks ..." more
      Share your story

      Did this article help you?

      Advertisement