How to Become a Rubik's Cube Speed Solver

Co-authored by Gavin Nelson

Last Updated: July 23, 2024 References

After you’ve mastered the basics of how to solve a Rubik’s cube , you can become a Rubik’s cube speed solver! Do this by speeding up the cube, learning to solve the cube faster, and using outside resources like the internet and community. Keep practicing, have some patience, and soon you can solve as fast as possible. On your mark, get set, go!

Method 1

Method 1 of 5:

Speeding up the Cube

Download Article

1
Invest in a quality Rubik’s cube. A quality cube's parts will move with ease, and they come in a variety of sizes, such as 2x2, 3x3, 4x4, or 5x5. Most people start off with a 3x3 cube. Go with options like Moyu, YJ, Dayan, Shengshou, GAN, or Fangshi (Funs puzzle).For speed-cubing stay away from the actual Rubik's brand. These cubes were not build for speed-cubing and are far worse than any speed cube. You can purchase them online or in stores.
- A good cube used to set past records only cost $9, though typically quality Rubik’s cubes cost around $15 and up (€4-20).
- A quality speed cube is helpful because turning takes very little force. Even if the layers aren’t perfectly aligned, the cube will still turn. You don't need to be completely accurate with every turn. ^{[1]
  X
  Research source}
Disassemble your cube by rotating the top face 45 degrees and popping out an upper edge piece. You can do this with your fingers, or use a screwdriver if you are having trouble. ^{[2]
X
Research source}

Advertisement
3
Apply a silicone-based spray or gel to the inside parts to lubricate your cube. Ensure you apply a light, even coat across all surfaces of your cube. Let your parts dry for about 10 minutes. You can also use petroleum jelly. Lubricating your cube can give you a move rate of 3 or 4 moves per second.
- Some heavy lubricants like cubicle weight 5, Traxxas, and Lubix will make your cube slow at first, though as you break in your cube, it will move faster and smoother.
- It may take a little while to get used to a Rubik’s cube moving this quickly. Practice solving your cube, and you’ll quickly notice how much faster you can solve the cube. ^{[3]
  X
  Research source}
4
Reassemble your cube and test out how fast the parts move. Start with the edge pieces, popping in the pieces on one side. You can fit four pieces on the core of your cube, and then place the completed face in the down position. Slide in the four corners, then slide in the edges of the middle layer from the top. Repeat this until you have all pieces assembled, and your cube will now move really fast.
- To help insert the last layer, start with an edge piece slightly turned to the side. ^{[4]
  X
  Research source}
The more you practice, the more familiar you will be with moving around your cube’s parts. And, the more you move your cube, the more you will break it in and make it easier to maneuver.

Method 2

Method 2 of 5:

Breaking Down the Process

Download Article

When learning how to solve a Rubik’s cube, it is helpful to start on the white side. Though, this isn’t always the easiest to solve. Be flexible and try different sides. The more you can maneuver your cube, the faster you can solve it. ^{[5]
X
Research source}
To understand how to move the Rubik’s cube, speed solvers mark every face of the cube with a letter: F- Front, U- Up, R- Right, B- Back, L- Left, and D- Down. Algorithms are codes made up of different movement combinations, and many different algorithms can be used to speed up the time it takes to solve. ^{[6]
X
Research source}
CFOP (also known as the Advanced Fridrich method) is the most popular method for speedsolving. There are four steps to this method: White cross, first two layers (F2L), orient last layer (OLL), and permute last layer (PLL). ^{[7]
X
Research source}

Method 3

Method 3 of 5:

Reducing Delays Between Moves

Download Article

1
Plan ahead to reduce delays between your moves. Scramble the cube, and then take a second to notice the details before you start trying to solve. Think about your first few moves before you solve it. A little planning can help increase your speed by cutting down on the seconds spend deciding where to move next.
- For example, if you're using the Fridrich Method, practice your F2L. While you're solving one pair, look ahead to find your next pair. This eliminates any pauses in between your moves. ^{[8]
  X
  Research source}
To be a speed solver, you must practice and practice some more. The more familiar you are with the cube and your moves, the easier it will be to speed up your solving time. ^{[9]
X
Research source}
If you get to be this speedy, you might be a contender for some world records! However, learn at your own pace to begin with. Understand that it takes time to master the moves and solve the cube super fast. ^{[10]
X
Research source}

Method 4

Method 4 of 5:

Using Finger Tricks

Download Article

1
Learn finger tricks and shortcuts to perform faster moves. Finger tricks are extremely fast moves performed with only one finger. These shortcuts can reduce your solving time by up to 10 moves per second. Try U, R, L, and B moves.
- Finger tricks are easier to complete if your Rubik’s cube is lubricated ^{[11]
  X
  Research source}
Push the top layer in your desired direction while keeping your other fingers away from the top layer. ^{[12]
X
Research source}
Keep your thumb on the bottom edge and your first three fingers on the top three pieces. Hold the cube with your left hand. Rotate your right wrist to perform the R and R2 move. ^{[13]
X
Research source}
Instead, use your left hand and hold the left face. ^{[14]
X
Research source}
Turn the cube as if the B face was the U face, and solve from this side. This move is tricky and rare in speedsolving. ^{[15]
X
Research source}
Using your thumb and first two fingers, hold the cube from the middle and top layers. Leave room for your pinky and ring finger behind the puzzle. Use either ring fingers to push the layer where you need to move it. D moves are the most difficult and take the longest to master. ^{[16]
X
Research source}

Method 5

Method 5 of 5:

Using Outside Resources

Download Article

Learn speed solving methods by watching other speed solvers online. There are many tutorials on YouTube. You can find videos on different techniques, algorithms, and finger tricks. ^{[17]
X
Research source}
2
Learn different methods and theories. Many of the top speed solvers offer their own methods to help other speed solvers. Learning different strategies will give you many more options as to how to solve. With some practice, these techniques can improve your time. You can find tutorials on how to solve with different methods on Google or YouTube.
- For beginners, try Joël van Noort's solution, Jasmine Lee's solution, or Blake O'Hare's simple solution.
- For intermediate or advanced cubers, try Dan Knight's Intermediate and Advanced speed solve methods.
- For experts, try the Lars Petrus and Jessica Fridrich solutions. Ron van Bruchem has several algorithms for the Fridrich method on speedcubing.com, as well. ^{[18]
  X
  Research source}
3
Use cube solving programs and software. Many speed solvers have created helpful programs and software to assist in solving the cube quickly.
- Cube Explorer and Cube Optimizer will help you discover the shortest algorithm for any cube. Download and install this program to try it out.
- Rubix Repair is an online cube solver, where you enter the colors on the cube and see a 3D representation of your cube.
- Dan Knights' Java Applet will show you the moves executed one step at a time, so you can follow along and learn how to solve them quicker. ^{[19]
  X
  Research source}
4
Join an online speedcubing community. Visit https://www.speedsolving.com or https://www.reddit.com/r/Cubers/ , and try Facebook and Google plus. Speedcubing communities can offer help and tips for all skill levels.
- Start your own community. Gather some friends interested in speed solving, and learn together. Sometimes you can learn so much by teaching others. You can all practice different techniques and provide feedback on ways to improve. ^{[20]
  X
  Research source}
5
Attend and enter competitions to learn speed solving techniques in person. The World Cube Association organizes competitions, and attending the tournaments is a great way to see how the professionals solve their cube. You can make friends and get hands-on help as well!
- Competitions are often organized by states, regions, or provinces.
- Find competitions on worldcubeassociation.org. ^{[21]
  X
  Research source}

Community Q&A

Search

Add New Question

Question

I learned the beginner's method in a few days. Will I get faster?

Community Answer

Yes, if you practice and challenge yourself to more difficult methods.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 43
Question

Is there anyone who can solve a Rubik's Cube in 1 second?

Itz Kool

Community Answer

There are quite a few robots that can solve the Rubik's Cube under 1 second. However, there are no humans who can solve a 3x3 in 1 second. The world record is now held by Yusheng Du with a time of 3.47 seconds.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 22 Helpful 83
Question

How can you solve a Rubik's cube in under 10 seconds?

Community Answer

Use the CFOP method, then you can solve by looking for a cross solution. This usually takes six moves. Also look for an f2l pair. When you start the timer and you do what you planned then just finish the remaining f2l slots looking ahead and avoiding cube rotations. Then do a fast and easy all for OLL and another alternative for OLL.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 16 Helpful 48

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

Getting to 10 seconds will be a lot of work. Don't expect it to happen quickly! It will probably take 3 months or longer.
Pro tip from a world class speed solver: Don't use Vaseline. Over time, it will melt your cube.
The most important things are lookahead, turns per second, and efficiency.
I've found that doing the cross without the daisy makes a faster solve.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Rubik's cube, preferably one made for speed cubing
Cube lubricant

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

Log in

How to Become a Rubik's Cube Speed Solver

Steps

Speeding up the Cube

Breaking Down the Process

Reducing Delays Between Moves

Using Finger Tricks

Using Outside Resources

Community Q&A

Video

Tips

Tips from our Readers

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories