How to Break a Glass with Your Voice

PDF download Download Article
PDF download Download Article

Thanks to a clever commercial that aired in the 1970s, the image of singers shattering glass with their voice alone has become seared into America's collective consciousness. [1] This may have led you to wonder, “Could I break a glass with my voice?” While there are many factors that will affect how easily you succeed in this task, with enough time and effort, you may be able to reduce a glass to shards with only your voice. [2]

Method 1
Method 1 of 3:

Setting the Stage for Glass Shattering

PDF download Download Article
  1. Remember, success in this task will result in broken glass, so you might want to practice in a room with hard floors to make clean up easier. Choose a room with good acoustics and little to no echo. You’ll also need a power outlet to plug in your amp if you've chosen to use a microphone, as well as a platform on which your glass and amp can sit.
    • If you plan on using your voice alone to shatter your glass, you'll only need a sturdy platform to place your glass upon. The platform should be relatively high so that you can stand while singing to get the best volume and tone.
    • Lay down a large drop cloth if you attempt this in a carpeted area. Small splinters of glass can become embedded in carpet and cause harm later. A drop cloth will keep shattered glass from getting in your carpet.
    • When using an amp and microphone, the amp should be placed facing your glass and relatively close to it. A sturdy coffee table might be sufficient to hold both speaker and glass while limiting distorting vibrations, though the ground might also work well. Try to position your amp so it isn’t blasting sound in the direction of people who might be bothered by it, like your neighbors.
    • Your glass should be directly in front of the amplifier's speaker. Look through the material covering the front of your amplifier and find the exact location of the speaker cone. Position your glass right in front of the cone. [3] [4]
  2. Shattering glass can produce very small fragments that can cause permanent damage to your eyes. Wearing simple eye protection, like safety glasses or goggles, will prevent this from happening.
    • If you don’t happen to have protective eyewear handy, you could use a pair of cheap sunglasses or swimming goggles. Be sure that your eye protection covers your entire eye. Half-lens reading glasses will not be adequate. [5]
    Advertisement
  3. Flick the glass with your fingernail gently and listen carefully to the ringing sound. This is the resonant frequency of your glass, and you will have to match and sustain this pitch to cause it to break. It may help you to hold onto the pitch if you hum it softly to yourself even after the glass has finished ringing.
    • You can also cause your glass to hum its resonant frequency by moistening your finger and rubbing it along the rim of your glass. Circle the rim of the glass with your finger until it resonates audibly. Then try to hold that pitch in your head.
    • You may find using an instrument or tool, like a piano or a pitch finder, can help you identify, hold, and narrow in on the resonant frequency while you’re trying to sing.
    • Empty your glass completely, remove decorations from it, and place it on a sturdy, regular surface while you are checking its resonant frequency. Things that are inside, on top of, or connected to your glass could alter this tone. [6]
  4. Holding a pitch in your head for a period of time usually results in a flat pitch. [7] A flat resonant pitch won't make your glass shatter. To help prevent yourself from going flat, you may want to hum along or sustain the note with some kind of tool, like an instrument, pitch pipe, or pitch finder/tuner. Hearing very slight differences in tone can be difficult even for talented musicians.
    • Check your pitch frequently as you attempt to shatter the glass with your voice. Simply flick the bulb of the glass gently with your fingernail, listen carefully to the resulting tone, and tweak your pitch to match it.
  5. Professional vocalists and opera singers are generally the people who attempt this kind of feat due to their vocal strength. You'll need to at least reach a volume of 100 - 110 decibels and match the resonant pitch perfectly for several seconds if you're going to shatter a glass. This can be a difficult feat if you are untrained, in which case you might use a microphone.
    • The 100 - 110 decibel range is similar to the noise produced by a nearby power mower, power saw, or motorcycle. To shatter glass, you'll have to reach this volume or louder while singing the resonant pitch. [8] [9]
    6. Advertisement
Method 2
Method 2 of 3:

Breaking a Glass with Your Voice Alone

PDF download Download Article
  1. With enough practice and vocal strength , you should be able to shatter a glass from a more comfortable distance. Most normal people, however, will have difficulty sustaining the volume necessary for breaking a glass. Being very close will focus your sound energy and give you the best chance possible of making it break.
    • To check just how loud you are singing, you might want to download a sound measuring app from the app store on your phone or buy a sound level meter from an online retailer. If you notice that, even at your loudest, you're nowhere close to the 100 - 110 decibel range, you might want to consider using a microphone. [10]
  2. Begin singing the resonant tone at a normal speaking volume. Listen carefully to the sound of your voice. Does it sound sharp (above the resonant pitch) or flat (below the resonant pitch)? If so, make slight adjustments to your tone. When you are confident that you are singing the pitch perfectly, slowly increase your singing volume into you are singing as loudly as you can.
    • If you feel discomfort, pain, or notice a significant change in the quality of your voice, you may be straining your voice by singing too loudly or too long. To prevent permanent damage, you should stop immediately, drink some water. Hold off singing until your voice is back to normal. [11]
    • Vowel sounds will be less obstructed, enabling you to achieve higher volumes. In particular, the "ee" vowel sound has the highest volume rating. The vowel “ay” is also rated very highly for volume.
    • Sustain your note as long as possible while making slight adjustments. Even if you hit the resonant frequency dead-on, you’ll have to hold the pitch perfectly for a few seconds before the glass vibrates enough to shatter. More likely you’ll have to “slide” your voice slightly up and down and make slight adjustments to match the resonant pitch.
  3. Some glasses will have more microscopic imperfections than others. More imperfections in the glass means you’ll have a better chance of causing it to shatter. By rotating between several different glasses, it’s more likely that at least one will have the imperfections you need to break the glass.
    • You might also want to try glasses of various shape and size. Be sure you check the resonant frequency of each glass with a flick of your nail; each glass will have its own slightly different resonant frequency.
  4. Dispose of the broken glass carefully when you succeed. Wear gloves when cleaning up to prevent yourself from getting cuts or scraped by a sharp edge. Then examine the area thoroughly to make sure you've picked up even the smallest fragments. A flashlight can help you spot small slivers.
    • You may want to avoid using a vacuum cleaner to suck up your glass fragments. Doing so can cause damage to your vacuum. Instead, sweep up as much as possible with a broom, and capture tiny slivers by pressing a piece of bread into the fragments. [12]
    5. Advertisement
Method 3
Method 3 of 3:

Breaking a Glass with a Microphone

PDF download Download Article
  1. The amplifier will need to be turned up fairly loud in order for this to work, so you should protect your ears from potentially harmful sound levels. A good pair of earplugs might be sufficient, but for very loud volumes, specialty sound dampening ear protectors might be best. [13]
  2. Plug in and switch on your amp. You should hear a faint tone caused by the electricity running through it. This means your amp is ready for input. Take the cord end of your mic and plug its audio jack into your amp.
    • You’ll also need to plug a microphone into your amplifier. You should place your mic as far away from the amplifier as the cable will allow to prevent distortion and mic feedback.
    • Use a microphone stand if you have one available. Singing hands free will allow you to focus more intensely on the task at hand.
    • Remember to wear your ear protection. Also, to minimize your exposure to loud volumes, you should stand behind the amp, or behind it and off to the side.
    • If your mic doesn’t work, check it for an on/off switch. If your mic is already switched on but still is not working, check the audio jack to make sure your it is fully connected to the speaker.
  3. If you are using an unfamiliar amp, test its volume at a medium level before attempting to put it on the maximum setting. Most glasses will require you to reach a minimum of 100 to 110 decibels, which is about the volume of a passing motorbike, a nearby car horn, or the music in a nightclub. [14] [15]
    • You may want to layer the wall your amp is pointed at with sound dampening material, like heavy blankets or cushions. This will prevent the loudness of your amp from aggravating others.
    • Other sound dampening measures you might make use of include acoustic panels, soundproof curtains, and other techniques.
  4. You’ll want to save your voice from unnecessary strain by singing at a soft to moderate volume. Slide your voice in very small increments around the resonant pitch until you feel confident that you have it perfectly. Then increase your volume until you are singing into the microphone directly at a moderate volume.
    • If your glass refuses to break, check your pitch with a pitch finder. The pitch you are singing might only be off a slight bit, but this can prevent your glass from breaking.
    • Vowels are less obstructed and will help you to achieve louder volumes. In particular, the "ee" vowel sound has the highest volume rating. The vowel “ay” is also rated very highly for volume.
    • Sustain your note as long as possible while making slight adjustments. Even if you hit the resonant frequency dead-on, you’ll have to hold the pitch perfectly for a few seconds before the glass vibrates enough to shatter. [16]
    • Since you are using amplification, you shouldn’t need to shout into the microphone. Speaking loudly puts strain on your voice and can do permanent damage if you’re not careful. Sing into the microphone at a moderate volume and take a break whenever your voice feels tired. [17]
  5. Dispose of the broken glass carefully . A pair of rubber gloves will help prevent you from getting any nicks or cuts from the glass while cleaning. You may want to use a flashlight to help you find difficult to see fragments. Pick up and throw away large pieces of glass with your hands, sweep up smaller fragments, and use care when vacuuming. Glass fragments may cause damage to your vacuum cleaner. [18]
    • A common trick for picking up small shard and slivers of glass uses a slice of soft sandwich bread. Press your bread into the floor wherever you see glass. The glass should get caught into the bread, which you can throw away when the glass is clean or the piece of bread is full of glass. You may need to use several pieces of bread to clean the entire area.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Won't the shattering of the glass injure my face if I use my voice? How would the glass break?
    Community Answer
    The glass would most likely not hurt you, as, most of the time, the glass breaks in large pieces. The glass would break in big and sometimes small chunks, but it will fall down. Just be prepared.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 29
  • Question
    I'm 12 and I tried to break glass and it didn't work. I tried all the methods. What can I do?
    Community Answer
    That's a physics question. It's called resonance. If you tried singing louder and louder until it breaks, you're on the wrong track. You'll need to sing at the right pitch for long enough.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 24
  • Question
    Can I use any glass?
    Kayla
    Community Answer
    Yes.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 24
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You can also break the glass by singing its resonant frequency (the pitch that causes an object to “hum”) an octave higher (twice the frequency) or an octave lower (half the frequency). [19]
        Thanks
        Helpful 0 Not Helpful 0
      • Every glass will be different and have a unique resonant frequency. Even imperfections that are invisible to your naked eye can cause a glass to resonate at a completely different pitch. [20]
        Thanks
        Helpful 0 Not Helpful 0
      • Crystal glasses will likely work better for this than with other types of glass. [21]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Breaking a glass with your voice without amplification is extremely difficult. In the beginning, it’s unlikely you’ll succeed. However, with practice and training, you could learn how to shatter glasses with a high rate of success, or even shatter multiple glasses at once.
        Thanks
        Helpful 6 Not Helpful 1
      • Be careful to avoid flying glass. Heavy metal singer Jim Gillette has been cut by glass when performing this feat, so exercise caution while attempting.
        Thanks
        Helpful 6 Not Helpful 2
      • Shattered glass can be dangerous. Use care when cleaning up broken glass.
        Thanks
        Helpful 8 Not Helpful 6
      • Turning up your amplifier to its maximum volume can result in damage the amplifier, your speakers, and possibly your eardrums as well. [23] [24]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      Breaking a Glass with Your Voice Alone

      • A crystal glass (that you don't mind breaking)
      • Safety goggles
      • Pitch finder (optional)

      Breaking a Glass with a Microphone

      • Amplifier with microphone input
      • Crystal glass (that you don't mind breaking)
      • Ear protection (e.g. earplugs, earmuffs)
      • Microphone
      • Pitch finder (optional)
      • Safety goggles

      You Might Also Like

      How to
      Develop Relative Pitch
      How to
      Get Perfect Pitch
      How to
      Sing High Notes
      Best Ways to Warm Up & Exercise Your Vocal Chords
      How to
      Breathe Correctly to Protect Your Singing Voice
      How to
      Develop a Strong High Singing Voice
      How to
      Sing
      How to
      Throat Sing
      Best Ways to Safely Clear Your Voice & Throat for Singing
      What Is the Dark Meaning of “Ring Around the Rosie”? A History of the Rhyme
      How to
      Use AI Singing Voice Generators
      How to
      Sing Beautifully
      How to
      Get on The Voice
      How to
      Play the Guitar and Sing at the Same Time
      Advertisement

      References

      1. ↑ https://large.stanford.edu/courses/2007/ph210/scodary2/
      2. ↑ https://www.scientificamerican.com/article/fact-or-fiction-opera-singer-can-shatter-glass/
      3. ↑ https://wonderopolis.org/wonder/how-can-a-voice-break-glass
      4. ↑ https://large.stanford.edu/courses/2007/ph210/scodary2/
      5. ↑ https://earthsky.org/human-world/resonant-frequency
      6. ↑ https://hyperphysics.phy-astr.gsu.edu/hbase/sound/reson.html
      7. ↑ https://www.musicradar.com/tuition/tech/96-vocal-production-tips-437031
      8. ↑ https://wonderopolis.org/wonder/how-can-a-voice-break-glass
      9. ↑ https://www.gcaudio.com/resources/howtos/loudness.html
      1. ↑ https://www.explainthatstuff.com/soundlevelmeters.html
      2. ↑ https://www.nidcd.nih.gov/health/taking-care-your-voice
      3. ↑ https://www.goodhousekeeping.com/home/cleaning/tips/a24001/surprising-trick-for-cleaning-broken-glass/
      4. ↑ https://www.nhs.uk/Livewell/hearing-problems/Pages/tips-to-protect-hearing.aspx
      5. ↑ https://wonderopolis.org/wonder/how-can-a-voice-break-glass
      6. ↑ https://www.nhs.uk/Livewell/hearing-problems/Pages/tips-to-protect-hearing.aspx
      7. ↑ https://hyperphysics.phy-astr.gsu.edu/hbase/sound/reson.html
      8. ↑ https://www.drugs.com/health-guide/vocal-cord-disorders.html
      9. ↑ https://www.goodhousekeeping.com/home/cleaning/tips/a24001/surprising-trick-for-cleaning-broken-glass/
      10. ↑ https://hyperphysics.phy-astr.gsu.edu/hbase/sound/reson.html
      11. ↑ https://hyperphysics.phy-astr.gsu.edu/hbase/sound/reson.html
      12. ↑ https://www.physlink.com/Education/AskExperts/ae479.cfm
      13. ↑ https://www.physlink.com/education/askexperts/ae479.cfm
      14. ↑ https://www.audioholics.com/home-theater-connection/avoid-blowing-speakers
      15. ↑ https://www.nidcd.nih.gov/health/noise-induced-hearing-loss

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 554,775 times.

      Did this article help you?

      Advertisement