Rabbits are known for their quick and effective breeding in the wild. Because they are a prey species, it is important for them to have a lot of offspring in order for the species to survive. [1] X Research source However, breeding rabbits at home can be a lot of work and may not be for everybody. If you are simply looking for a pet, it might not be a good idea to breed rabbits yourself. However, if you are looking to breed rabbits for food or attempting to reproduce a specialty breed, you will need to have a good breeding pair, prepare for success (or failure), and understand how much work you have ahead of you.
How to Breed Pet Bunnies
Choose the breed of rabbit you want to breed. Select a healthy buck and a doe that are at least 6-9 months old. Place the doe in the buck's hutch and leave them together for about 30 minutes. 10-14 days after mating the rabbits, feel the doe’s abdomen to check for pregnancy.
Steps
-
Decide why you want to breed rabbits. Breeding rabbits is a huge responsibility that takes time, commitment, and patience. Before you begin breeding rabbits, decide why you want to do this. Are you planning on selling them? Do you want them as pets? Are you breeding them for meat? Decide if this is something you truly want to commit to doing. If you don't have the time, think you will get tired of it, or eventually want to send the rabbits to a shelter, rethink your plans.
- Rabbits are the third most common animal in shelters, after dogs and cats. Other rabbits get released into the wild, where they die from predators, lack of care, or starvation.
- Only a small percentage of rabbits at pet stores find safe, loving owners. They may be sold to inexperienced owners who may accidentally kill them.
- Breeding rabbits won't turn a significant profit. Plus, there isn't a high demand for rabbits, especially as pets, because there are already so many pet rabbits trying to be sold. [2] X Research source
EXPERT TIPVeterinarianDr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.Pippa Elliott, a licensed veterinarian, advises: "When considering breeding your rabbit, ask yourself this question: 'Could I look after and care for all the litter, should they not find homes?' If the answer is 'No', then do not breed."
-
Research available rabbit breeds. There are a wide variety of rabbit breeds available to home breeders. Before you choose a rabbit just because it is cute, be sure that it will fulfill your needs. Here is some basic information about several common rabbit breeds (but this list is by no means exhaustive): [3] X Research source
- American: The American rabbit breed is a large-sized breed that is a good meat and fur breed. It is typically 9 - 12 pounds, a hardy breed, and they produce large litters. [4] X Research source
- Angora: There are several types of angora rabbits, including English, French, Giant, and Satin. These rabbits are typically bred for their wool. The wool is hand spun into yarn, which is knitted into light-weight and soft garments. Because of the nature of angora coats, this breed needs a lot of grooming, usually once or twice a week.
- Flemish Giant: Flemish giant rabbits are the largest breed of rabbits. They can weigh up to 22 pounds. They come in seven colors, from black through white. Flemish giants were originally bred for meat and fur, but are now largely bred for show or as pets, as they are expensive to feed and have a very pleasant docile nature. [5] X Research source
- Himalayan: The Himalayan rabbit is a small, white breed that is used in laboratories and bred for show. Due to its small size, it is relatively cheap to feed and raise. [6] X Research source
- Chinchilla: The chinchilla rabbit breeds are typically bred for their fur but also make excellent pets. They are medium sized, from 9 to 12 pounds, and have docile and curious personalities. Above all, however, their fur is their winning feature, as it is exceedingly soft and enjoyable to pet.
Advertisement -
Choose the right rabbits to breed. The breed you choose might depend on availability, price, and preference. What you plan on doing with the rabbits also determines which breeds you choose. Some people want to sell and show the rabbits, while others want to keep them as pets, and others breed for meat.
- If you want to sell or show the rabbits, make sure to mate rabbits of the same breed. If you are planning to sell the rabbits, mixed breeds have little value. Mixing the breeds when you mate the rabbits also lessens the quality of the stock. [7] X Research source A rabbit can't be considered pedigree if there is mixed-breed blood.
- If you want the rabbits for meat or genetic experimentation, you can mix the breeds of rabbits. [8] X Research source
- Never breed full siblings. You can breed half siblings, father-daughters, mother-sons, cousins, and so on. Unless you have a lot of knowledge about genetics and inbreeding, try not to breed pairs that are too closely related. [9] X Research source
-
Breed your rabbits at the proper age. You want to start breeding does (female rabbits) when they are reaching maturity. For small-medium breeds, they can be bred at 6-7 months old. Larger breeds can be bred at 8-9 months. [10] X Research source Bucks (male rabbits) are usually ready around 6 months old if a small breed, 7 months if medium, and 9 months for a large breed. [11] X Research source
-
Ensure that you will have homes for the kits (babies) before you breed. Check that you will have spare hutches for when the kits are weaned, and that you will be able to afford the costs of breeding. Decide what you are going to do with the kits when they have been weaned.
- Male and female kits must be separated when they are 8 weeks old. By 10 weeks old for bucks and 3-4 months old for does, rabbits need their own private cage. You must have enough cages for these animals in case you don't sell them.
- If you overcrowd young kits, they could fight and injure each other, or live in poor conditions that will affect their health. [12] X Research source
- You also should have a large, safe enclosed garden for the rabbits.
- If you plan on selling the rabbits, try to talk to friends, other breeders, or advertise so that you can line up potential customers ahead of time.
-
Breed from healthy, happy rabbits only. The physical condition of your rabbits when mating them is extremely important. Take your rabbits to a veterinarian before breeding them, just to make sure they are in tip top shape.
- Rabbits should not be underweight or overweight because this affects the success of the breeding. You should monitor what you feed the rabbits and make sure you provide the best nutrition so they are healthy.
- Check the cage of both the buck and doe for any evidence of diarrhea or loose stools. Check the genitals on both rabbits for any signs of disease of infection, such as extreme redness, discharge, sores, or scabs. [13] X Research source These conditions need to be treated before breeding the rabbits.
- If your rabbit is aggressive or unhealthy, don't breed it. Breeding aggressive rabbits is not recommended.
-
Put the doe in the buck's hutch. A female's cage will smell like her, so the buck may get distracted by the unfamiliar smells and try to mark the territory. They may also fight. Always take the female to the male.
-
Leave the breeding pair together for half an hour. You want to give the rabbits time to mate, preferably 2-3 times. [14] X Research source Having them mate multiple times can help with the litter size and the success of the breeding. [15] X Research source
- Some people breed them again after an hour or later the same day to ensure a mating instead of letting them breed 3 times in a single session.
- If the female is anxious, aggressive, or trying to get away from the male, separate them immediately.
- You may want to check the doe's vent to make sure that the breeding didn't misfire. If you find the doe's back or tail wet, the breeding was not successful. Leave the rabbits in the cage and let them breed again. [16] X Research source
- It is not ideal for bucks and does to be left together for long periods of time. Although they may get along well, they may also fight if the doe becomes annoyed with the buck. Does have been known to castrate bucks. Contrary to popular belief, however, there is no danger of a doe becoming pregnant with two litters at once (unlike hares, which CAN carry two pregnancies, but the embryos are stored until she gives birth) [17] X Research source .
-
Feel the abdomen of the female to determine if it is pregnant. Palpation is the best way of telling if a doe is pregnant or not. This is the method of using your hands to examine her body by feeling her abdomen to see if there are any babies inside. If she is pregnant, you will feel grape-sized embryos. For beginners, this method is most easily done 10-14 days after breeding. [18] X Research source
- Pregnancy lasts approximately 28-33 days depending on the breed. Dead litters are usually delivered after day 34, but does have been known to give birth to live kits up to day 40.
- If the doe is not pregnant, you can breed her again immediately.
-
Provide plenty of extra hay and bedding. Around day 25, a nesting box should be put in the doe's cage. This is for the doe to build a nest with. The nesting box should have soft straw or hay. Leave extra material around for her so she can make her nest. She will also pluck her chest and stomach hair to fill the nest.
- The nesting box should be 18" x 10" x 10". Cut the front into a V-shape or another opening that is 6" high for the doe to get in and out of. Make sure there is a small wire mesh bottom to allow urine and moisture to drain. Also place paper underneath to soak up the urine.
- Make a hole in the hay at the back of the box to encourage the doe to make her nest back there. This can help protect the kits from the elements and protect them from the doe jumping in and out of the box. [19] X Research source
-
Give the doe peace and quiet. The mother needs a quiet, stress-free environment while pregnant. Don't lift her up unless you absolutely have to. Unnecessary lifting can damage the litter. If you do lift her, don't lift her by her stomach.
-
Expect the mother to give birth 28-33 days after breeding. The mother will start nesting around days 25-27, and by day 32-33, she will give birth. Leave her to it if you do catch her giving birth, though chances are all will be done and cleaned up long before you are awake. Babies tend to be born before dawn.
- Listen for cheeping. Kits sound like baby birds, and hearing them is one way to tell if the mother has given birth. You can also tell by seeing movement in the nest, or if the doe has a little blood on her nose.
- The doe will clean the hutch to ensure no predators smell the blood or other scents and investigate.
- Inspect the litter after they are born. Remove any dead kits. Do this daily to check for dead kits.
- If you have bred multiple does at one time, you can foster kits with other mothers if one has too many and another has too few kits, just make sure to mark the fostered kits with either nail polish on their toe or permanent marker in their right ear to be able to tell them apart from the foster mother's kits.
-
Seek veterinary care. You may want to keep your pregnant doe under veterinary care while she is pregnant. Your vet can assess the doe's health and the state of the pregnancy.
- There can be complications with any pregnancy. Keep an eye on you pregnant rabbit and take her to the vet if she has not given birth by 32 days. [20] X Research source If the pregnancy goes to long it could result in a dead litter.
-
Feed the doe more. Once the kits are born, give her as much dry food as she likes, as feeding kits will drain her. Don't stop with her vegetables, but don't increase them. If you increased the food during the last week of pregnancy, don't increase again until 3-4 days after giving birth. [21] X Research source Stop completely if her droppings become loose.
-
Know how to treat the mother. If the doe is happy for you to stroke her and is acting normally, and you have a very good relationship with her, it might be a good idea to let her out for a little exercise. You should let her out for about an hour if she is used to it. This will give you a chance to inspect the nest and remove any dead kits.
- Be careful if you attempt to go near the nest if the doe doesn't trust you or gets upset.
- Some people say the doe will abandon the kits if you touch them, but others claim you can handle the babies without the mother being upset. [22] X Research source
-
Check the temperature of the nest. The temperature of the nest box should be around 100 degrees during week 1. If the nest is good and the cage temperature is 60-75 degrees, it will be fine. [23] X Research source If the nest is too cold, the kits can freeze.
-
Check on the kits daily. You want to check the kits during the day and night. Check them while they are feeding so you can make sure they are feeding normally. If they are not, you may need to give them supplementary feed. You also want to make sure they are eating well and gaining weight at the proper intervals.
- Checking them multiple times daily can also help you catch any kits that have wandered out. If they are left unattended outside the nesting box, they can freeze and die.
-
Clean the hutch and box. Poor conditions can cause kits to die. You want to make sure the nesting box isn't overrun with urine and feces, and you want to make sure the hutch and outdoor run is clean and hygienic. Sometimes mothers can defecate a lot, which may attract flies. These flies can cause infections in young kits.
- Change the nest material a week after the litter is born. Keep an eye on the litter the days after changing the hay. Kits have a tendency to leave the nest box after changing the hay, and if it is cold, they can freeze. Continue changing the hay every few days. Remove the box after 3 weeks.
- Replace the paper when used as needed. [24] X Research source
-
Keep the doe's routine normal. Let your doe out during the day, but keep in mind that she will have lost hair on her stomach and chest, and putting her on wet grass or out in the cold can be unwise.
-
Wean the babies at 6-8 weeks. Remove the doe from the litter at 7 weeks. Put out food so that the kits can feed freely, ensuring that they get enough feed. At 8 weeks, move the kits into individual cages or in pairs. You can also move all the does to one cage and the bucks to another. [25] X Research source
- The period of weaning can be stressful for the mother and kits. Make sure that they are all have enough water and food. You can also add probiotics to the water, to help with the digestive health of the rabbits. [26] X Research source
Expert Q&A
-
QuestionWhat do I do if the doe won't let the buck breed?Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.This is unusual, since rabbits are induced ovulators and their whole physiology is geared towards getting pregnant. One explanation could be the female is a pet and therefore is so used to people that she doesn't think she's a rabbit. Therefore she might rebuff the male's attention. Try stepping back and making less of a fuss of her, while keeping the male in a cage where she can smell and see him.
-
QuestionDo female rabbits mount male rabbits?Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.Yes, sometimes they do as a form of dominance behavior to show who's in charge, rather than mating.
-
QuestionCan you breed siblings?Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years.While siblings can and do breed together, this is extremely unwise. The resulting kits are more likely to have birth defects or undesirable health problems because their parents have so much genetic material in common.
Video
Tips
- Try to get close to the female before breeding her. The better your relationship, the more interaction you can have with the kits.Thanks
- If your rabbit has had something wrong with it in the past, ask a vet if it is okay to breed. Otherwise, the rabbit might still have a problem that can spread to the kits.Thanks
- Think before you breed! Shelters are full to brimming with bunnies they can't find homes for. Don't breed rabbits to educate the kids on the facts of the life; that's what books are for. These are living, breathing creatures that deserve to be respected and loved.Thanks
Tips from our Readers
- Have proper housing, supplies, and homes lined up for the kits before breeding rabbits. Overcrowding causes stress and sickness. Make arrangements to rehome the babies before they're even born — don't just assume you can find owners later.
- Always bring the female bunny over to the male's hutch for breeding. Female rabbits can get really territorial and aggressive. She may attack the male if he hops into her space. Keep an eye on breeding pairs so they don't fight.
- Remember that rabbits aren't just cute pets or showpieces — they're living creatures. Make sure you can provide a good home and care for any baby bunnies before deciding to breed rabbits.
- If it's really cold outside, set up a heat lamp near the nest box to keep the little kits warm and toasty. Baby rabbits can freeze easily if their nest gets too chilly.
- Use latex gloves when handling newborn kits so you don't transfer your scent onto them. The mama bunny may reject the babies if they smell funny to her.
- Get dead kits out of the nest straight away. Leaving them in there spreads germs and isn't hygienic.
Warnings
- A lot of first time mothers will have stillbirth litters; be prepared for dead kits.Thanks
- If the doe is in labor for awhile but no baby shows, or if she is struggling, call your vet. Don't move her unless on the instruction of a vet, as she may just be taking her time. Also contact the vet if the doe continues bleeding.Thanks
References
- ↑ https://rabbit.org/activism/5-startling-rabbit-overpopulation-facts-why-breeding-is-a-problem/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/
- ↑ https://www.arba.net/breeds.htm
- ↑ https://www.livestockconservancy.org/index.php/heritage/internal/american
- ↑ https://mentalfloss.com/article/62965/7-big-facts-about-flemish-giant-rabbit
- ↑ https://www.pdsa.org.uk/taking-care-of-your-pet/looking-after-your-pet/rabbits/himalayan
- ↑ https://www.threelittleladiesrabbitry.com/breeding.php
- ↑ https://www.debmark.com/rabbits/breeding.htm
- ↑ https://www.debmark.com/rabbits/breeding.htm
- ↑ https://www.threelittleladiesrabbitry.com/breeding.php
- ↑ https://www.debmark.com/rabbits/breeding.htm
- ↑ https://www.thenaturetrail.com/rabbit-breeding/
- ↑ https://www.debmark.com/rabbits/breeding.htm
- ↑ https://thehomesteadinghippy.com/breed-rabbits/
- ↑ https://www.raising-rabbits.com/rabbit-mating.html
- ↑ https://www.thenaturetrail.com/rabbit-breeding/bunny-mating-techniques/
- ↑ https://www.smithsonianmag.com/science-nature/hares-can-get-pregnant-while-pregnant-35542864/
- ↑ https://www.merckmanuals.com/pethealth/exotic_pets/rabbits/breeding_and_reproduction_of_rabbits.html
- ↑ https://www.thenaturetrail.com/rabbit-breeding/nest-box-for-babies/
- ↑ https://www.merckvetmanual.com/pethealth/exotic_pets/rabbits/breeding_and_reproduction_of_rabbits.html
- ↑ https://www.thenaturetrail.com/rabbit-breeding/care-newborn-baby-bunny/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/care-newborn-baby-bunny/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/care-newborn-baby-bunny/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/nest-box-for-babies/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/weaning-baby-kits/
- ↑ https://www.thenaturetrail.com/rabbit-breeding/weaning-baby-kits/
About This Article
To breed rabbits, wait until your rabbits are at least 6 months old and choose mates that are healthy and happy. Next, place the female into the male's hutch and leave them alone for about 30 minutes so they can mate. Avoid leaving them in the same hutch for longer periods of time and if the female seems anxious or aggressive, separate them immediately. Once the female rabbit is pregnant, she will start nesting after 25-27 days, and she'll give birth by day 32-33. For tips on ensuring the rabbits' mating results in pregnancy, read on!
Reader Success Stories
- "The information presented in this article is very helpful, especially to a beginner like me on how to properly breed rabbits, it's very instructional. I have already bred rabbits but I have a problem in the feeding regiments on pelletized feeds." ..." more