How to Build Garage Shelving

PDF download Download Article
PDF download Download Article

If you have a cluttered garage, adding shelves can help you organize your space. If you have a large garage, freestanding shelving units are perfect to set up against a wall. However, if you don't have open floor space, you can build shelves that hang from the ceiling to keep your things out of the way. For storing lightweight items and tools, you can build shelves directly on your wall.

Method 1
Method 1 of 3:

Making Freestanding Shelves

PDF download Download Article
  1. Cut all of your boards and plywood using a circular saw . Look for long, straight boards without any deformities. Use a tape measure to find the length of each board. For this shelf, cut 2 in × 4 in (5.1 cm × 10.2 cm) boards into 8 pieces that are 2 ft (0.61 m) long and 8 pieces that are 20 in (51 cm) long. Then cut 2 8 ft × 4 ft (2.4 m × 1.2 m) plywood sheets in half to make 4 pieces that are 8 ft × 2 ft (2.44 m × 0.61 m). [1]
    • Purchase 16 boards that are 8 ft (2.4 m) long so you only need to make cuts for the short sides of your shelves. Leave 10 of the boards uncut.
    • This shelf is 8 feet (2.4 m) tall, 8 feet (2.4 m) long, and 2 feet (0.61 m) deep. The final measurements for your shelves will vary depending on the size of your garage.
  2. Arrange 2 boards that are 8 ft (2.4 m) long and 2 boards that are 2 ft (0.61 m) long into a rectangle that measures 8 by 2 feet (2.44 m × 0.61 m). Set your 20 in (51 cm) boards parallel to the 2 ft (0.61 m) boards inside the frame about 30 inches (76 cm) in from each side. These boards will help support the weight on your shelf. [2]
    • In total, you will have enough frames to make 4 shelves.
    Advertisement
  3. Drive 2 nails or screws that are 3 in (7.6 cm) long in each corner with either a hammer or an electric screwdriver. When you're finished with the corners, finish by attaching the support beams in the middle of the frame, using 2 nails or screws on each side. Repeat the process for the 3 remaining shelves. [3]
  4. Lay the plywood on top of your shelf frames so the smooth side faces up. Drive 2 in (5.1 cm) nails every 2 feet (0.61 m) along your frame, starting in the corners. Continue securing the plywood for each of your shelves. [4]
    • Use a nail gun if you want to attach the plywood faster.
  5. Clamp 4 boards that are 8 ft (2.4 m) long on the corners of the bottom shelf so they're flush. Start by attaching the bottom shelf at ground level using 2 nails or screws that are 3 in (7.6 cm) long in each corner. [5]
    • Move the bottom shelf up by 1–2 inches (2.5–5.1 cm) if you don't want it resting directly on the ground.
  6. Clamp a spare 2 ft (0.61 m) board between 2 of the uprights and set your next shelf on it. Use a level to make sure your shelf is sitting straight. Raise the other end of the shelf until it's level and clamp it to the other set of uprights. Secure the shelf with nails or screws, and continue adding shelves until the last one is flush with the top. [6]
    • Have a partner help you lift and maneuver the shelves so you don't damage them or hurt yourself. boards and space your shelves so they're 2 1 ⁄ 2 feet (76 cm) apart.}}
    EXPERT TIP

    Ashley Moon, MA

    Professional Organizer
    Ashley Moon is the Founder and CEO of Creatively Neat, a virtual organizing and life coaching business based in Los Angeles, California. In addition to helping people organize their best life, she has a fabulous team of organizers ready to de-clutter your home or business. Ashley hosts workshops and speaking engagements at various venues and festivals. She has trained with Coach Approach and Heart Core for organizing and business coaching respectively. She has an MA in Human Development and Social Change from Pacific Oaks College.
    Ashley Moon, MA
    Professional Organizer

    Make the most of garage wall storage. Install shelving racks and floor-to-ceiling storage cabinets on garage walls to get small, easily scattered garage items up and out of the way neatly. This way, bulky seasonal gear can be accessed safely without toppling piles.

    7. Advertisement
Method 2
Method 2 of 3:

Building Small Shelves on the Wall

PDF download Download Article
  1. Use a circular saw to cut 1 ⁄ 2  in (1.3 cm) plywood into 2 shelves that are 16 in (41 cm) deep and 6 ft (72 in) long. Cut your 2 in × 4 in (5.1 cm × 10.2 cm) boards into 6 pieces each that are 12 inches (30 cm), 10 inches (25 cm), and 8 1 ⁄ 2 inches (22 cm). These pieces will form your brackets. [7]
    • Some home improvement stores can cut your plywood to size for you. Ask an employee at the store if they are able to cut your wood.
  2. Use a speed square and a pencil to mark your angles. Make both angles on the same side so your boards look like trapezoids when they're cut. Cut along the angles with your circular saw. [8]
    • Speed squares help you mark angles quickly, and they can be purchased from your local hardware store.
  3. Form an L-shape with your 10 in (25 cm) and 8 1 ⁄ 2  in (22 cm) pieces. Attach the boards at their joint with 2 screws that are 2 1 ⁄ 2  in (6.4 cm) long and an electric screwdriver. Set the piece with the angle cuts inside the L-shape so it forms a triangle. Screw the board in place using 2 screws on each end. [9]
  4. Use a stud finder and a pencil to mark the spots along your wall where you can attach your brackets. [10] Plan to put the first set of brackets 16 in (41 cm) apart and the third bracket 32 in (81 cm) away from the second. Hold the side of the bracket with the 8 1 ⁄ 2  in (22 cm) board against your wall, and use 4 screws per bracket to attach them to the wall. Repeat the process for your second shelf. [11]
    • Finding the studs is especially important if you plan to store anything heavy on your shelves. [12]
    • Adjust the height of your shelves depending on what you want to store on them. Usually, 16 inches (41 cm) between the shelves is enough.

    Tip: If you plan on storing heavy bins or items on your shelves, place an extra bracket 16 inches (41 cm) between the second and third bracket to prevent bowing.

  5. Set your plywood pieces on your brackets and make sure they are flush with the wall. Use 4 screws that are 2 1 ⁄ 2  in (6.4 cm) long per bracket to attach your shelves. Once your shelves are secure, you can start loading your items on them. [13]
    6. Advertisement
Method 3
Method 3 of 3:

Hanging Shelves from the Ceiling

PDF download Download Article
  1. Leave 2 of your 10 ft (3.0 m) boards uncut. Cut the remaining 3 boards into 7 pieces that are 27 in (69 cm) long and 2 pieces that are 30 in (76 cm) long. Use your saw to cut the plywood into 1 sheet that's 8 ft ×  2 1 ⁄ 2  ft (2.44 m × 0.76 m) and 2 pieces that are 1 ft ×  2 1 ⁄ 2  ft (0.30 m × 0.76 m). [14]
    • The final shelf measures 10 feet (3.0 m) long and 2 1 ⁄ 2 feet (0.76 m) deep, and will hang 26 inches (66 cm) from the ceiling. Your shelves may vary in size depending on the size of your garage.
  2. Climb a ladder and find a ceiling beam that extends 30 inches (76 cm) from the wall. Attach a tie connector with 3 in (7.6 cm) screws to the ceiling beam with an electric screwdriver. Place the other tie connector 116 inches (290 cm) apart from the first one and screw it in. Put a 30 in (76 cm) in each tie connector with screws. [15]
    • Tie connectors can be purchased at your local hardware store.

    Tip: Put your shelf above your garage door to keep your shelves out of the way. Use the shelf to hold seasonal items that you don't use very often, such as Christmas lights.

  3. Make a rectangle that's 10 ft ×  2 1 ⁄ 2  ft (3.05 m × 0.76 m) with your boards. Arrange the rest of the short boards parallel to the side of the frame inside the rectangle at 2 ft (61 cm) intervals to create supports. Use 2 nails at each connection to secure the boards and finish your frame. [16]
  4. Hold the shelf frame so the bottom is level with the ends of the boards hanging from the ceiling. Use 3 1 ⁄ 4  in (8.3 cm) screws in the middle of the board every 18 inches (46 cm) to secure the shelf to wall. [17]
    • Have a partner help you lift and support the board while you secure it to the wall.
  5. Make sure the bottom of the ceiling supports are flush with the bottom of the shelf. Drive 2 nails through the supports with a hammer to secure them in place. [18]
    • Use a nail gun if you want to drive the nails quickly.
  6. Put the 1 ft ×  2 1 ⁄ 2  ft (0.30 m × 0.76 m) sheets flush with either end of the shelf. Nail the sheets down in each corner. Then, set the 8 ft ×  2 1 ⁄ 2  ft (2.44 m × 0.76 m) piece of plywood in between the smaller sheets and slide it so the edges are flush with the frame. Put in a nail every 18 inches (46 cm) along the front of the shelf. [19]
    • You don't need to secure the plywood on the back of the frame.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you build sturdy garage shelves?
    Christopher Lanier
    Handyman
    Christopher Lanier is a Handyman and the former Owner and operator of Watson & Company Handiworks, a handyman business in Austin, Texas. For nearly 5 years Christopher specialized in outdoor light installation, furniture assembly, TV mounting, and window treatment installation. Before closing in 2021 Watson & Company Handiworks was rated as a Top Pro by Thumbtack. Christopher holds a Bachelor’s degree in Business Administration from the University of Texas at Austin. He currently works as an inventory manager at Grocery TV, the largest digital advertising network in the U.S. grocery industry.
    Christopher Lanier
    Handyman
    Expert Answer
    Make sure you find the studs in your wall before you install the shelves. That way, you can insert your shelf brackets into a stud. This will make your shelves more sturdy.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      Making Freestanding Shelves

      • 2 4 ft × 8 ft (1.2 m × 2.4 m) sheets of 1 ⁄ 2  in (1.3 cm) plywood
      • 16 2 in × 4 in (5.1 cm × 10.2 cm) boards that are 8 ft (2.4 m) long
      • Circular saw
      • 3 in (7.6 cm) nails or screws
      • 2 in (5.1 cm) nails
      • Hammer
      • Electric screwdriver
      • C-clamps

      Building Small Shelves on the Wall

      • 1 4 ft × 8 ft (1.2 m × 2.4 m) sheet of 1 ⁄ 2  in (1.3 cm) plywood
      • 2 2 in × 4 in (5.1 cm × 10.2 cm) boards that are 8 ft (2.4 m) long
      • Circular saw
      • Speed square
      • Stud finder
      • Level
      • Electric screwdriver
      • 2 1 ⁄ 2  in (6.4 cm) screws

      Hanging Shelves from the Ceiling

      • 1 4 ft × 8 ft (1.2 m × 2.4 m) sheet of 1 ⁄ 2  in (1.3 cm) plywood
      • 3 2 in × 4 in (5.1 cm × 10.2 cm) boards that are 8 ft (2.4 m) long
      • 2 2 in × 4 in (5.1 cm × 10.2 cm) boards that are 10 ft (3.0 m) long
      • Circular saw
      • Ladder
      • 3 in (7.6 cm) screws
      • Drill
      • Rigid tie connectors
      • 2 in (5.1 cm) nails
      • Hammer

      You Might Also Like

      How to
      Store Christmas Lights
      The Best Ways to Store Crumbl Cookies (& How Long They Stay Good For)
      How to
      Organize a Chest Freezer
      How to
      Store Rope
      How to
      Size Your Comic Books for Proper Storage
      How to
      Store Plywood in a Garage
      How to
      Safely Store Your Important Documents at Home
      How to
      Store Your Kombucha Scoby
      How to
      Store Headphones
      The Best Ways to Store & Keep Flaxseed Fresh
      How to
      Store Posters
      How to
      Store Luggage in a Garage
      Advertisement

      References

      1. ↑ https://www.naturalhandyman.com/iip/infshe/infshe3.html
      2. ↑ https://www.naturalhandyman.com/iip/infshe/infshe3.html
      3. ↑ https://www.naturalhandyman.com/iip/infshe/infshe3.html
      4. ↑ https://youtu.be/dfRiyPGUrGI?t=22
      5. ↑ https://youtu.be/dfRiyPGUrGI?t=26
      6. ↑ https://www.naturalhandyman.com/iip/infshe/infshe3.html
      7. ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/g2530/how-to-build-garage-storage-shelves-for-cheap/
      8. ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/g2530/how-to-build-garage-storage-shelves-for-cheap/
      9. ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/g2530/how-to-build-garage-storage-shelves-for-cheap/
      1. ↑ Christopher Lanier. Handyman. Expert Interview. 25 August 2020.
      2. ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/g2530/how-to-build-garage-storage-shelves-for-cheap/
      3. ↑ Christopher Lanier. Handyman. Expert Interview. 25 August 2020.
      4. ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/g2530/how-to-build-garage-storage-shelves-for-cheap/
      5. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/
      6. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/
      7. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/
      8. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/
      9. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/
      10. ↑ https://www.hertoolbelt.com/overhead-garage-storage-shelf/

      About This Article

      Thanks to all authors for creating a page that has been read 80,255 times.

      Did this article help you?

      Advertisement