Download Article
Step-by-step instructions to help you build your very own sauna
Download Article
Saunas are small interior spaces that are heated and fed with water to create a hot, steamy environment where people can relax and ease muscle pain. Building personal saunas is relatively simple if a good location is selected and the adequate materials are purchased. Although styles and sizes of saunas vary, the basic principles of sauna construction are the same, and these steps will give you a general outline of how to build a home sauna.
Steps
-
Choose a spot for your home sauna where plumbing, heating and electricity are easily accessible. Clear a space that is removed from overhanging trees and running water. [1] X Research source
-
2Install any necessary pipes, wires, or gas lines.Advertisement
-
Dig a space for rocks if you are using lava rocks to heat your sauna. If using infrared heating, make sure you have enough power for the heating system.
- Personal saunas are generally heated in two ways: lava rocks, which are heated in a stove and over which water is poured to create steam, or infrared heating, which uses a heater inside the sauna. [2] X Research source
- Lay a simple foundation for your sauna and build the inner frame. [3] X Research source
-
This should be a simple structure consisting of wooden boards. Leave room for three ventilation points: one in the ceiling, one on the floor, and one above the heater. Add spaces for benches and windows as desired. [4] X Research source
-
Insulate the inner frame with fiberglass and add a vapor barrier to keep moisture off the fiberglass and help it last longer.
-
Build a simple outer wall about a foot (or 30 cm) outside the inner frame.
-
Roof the sauna with simple wood or tile and remember to keep a ventilation spot open for steam to escape.
-
Install your heating system, following instructions given with the system, and leave a wide space for the sauna heater.
-
Place the first layer of flooring using ceramic tile. This goes over your heating system and will collect moisture.
-
Lay a second layer of flooring using unsecured boards. You should be able to easily remove these and clean the tiles.
-
Install the sauna heater.
-
Add any benches, windows and other fixtures as desired.
-
Test the sauna by turning on the heating system and observing the functioning of the ventilation points before using. [5] X Research source
Advertisement
Community Q&A
Search
-
QuestionCan you describe a vapor lock in detail?Community AnswerIt is common for unknowing builders to use plastic vapor barriers for Sauna construction, as these products have been used in residential work for many years. These barriers do not hold up in Sauna conditions. Builders foil, typically foil with a kraft paper backing, is the appropriate material for vapor lock.
-
QuestionWhat would be inside dimensions of the room (length, width and height)?Community AnswerIt could be 6' x 6' x 7' high, which is great for two on bunk platforms plus the heater. Don't forget to use a well sealed plastic vapor lock on the ceiling and walls unless you want to re-build a good portion of your house in a few years.
-
QuestionWhat accidents can happen when one is using a sauna?Community AnswerThe heater can overheat and you can become too hot. You can also burn yourself on the lava rocks. It really hurts, so have a bucket of cool water nearby just in case.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Personal saunas should always be made with wood, as wood can take on and release humidity and heat better than other materials. Cedar and white spruce are two popular woods for saunas, given that they tend not to expand or contract too dramatically. [6] X Research sourceThanks
- Many countries require a building permit to make significant changes to the outside of your home and some will require additional permits for the plumbing and electric work, so be sure to check with your local authorities in advance. [7] X Research sourceThanks
- If possible, use tongue and groove lumber for the outer wall. This eliminates the necessity of using nails, which will heat up when the sauna is in use and can cause injury.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Personal saunas requires constant upkeep. Remember to remove the floorboards to clean the ceramic tiles, clean the sauna heater, check the wood for any excessive bulging, and keep the ventilation points clear. [8] X Research sourceThanks
Advertisement
Things You'll Need
- Access to plumbing, heat, and electricity lines
- Sauna heating system (rocks or infrared)
- Sauna heater
- Wood boards
- Roofing material
- Ceramic tile
References
- ↑ http://www.saunasociety.org/build-a-sauna
- ↑ http://www.agardenbuilding.co.uk/create-outdoor-sauna-room.html
- ↑ https://www.sauna-talk.com/building-an-outdoor-sauna.html
- ↑ http://www.agardenbuilding.co.uk/create-outdoor-sauna-room.html
- ↑ https://build.com.au/sauna-ventilation
- ↑ https://www.sauna-talk.com/sauna-plans.html
- ↑ https://www.sauna-talk.com/building-an-outdoor-sauna.html
- ↑ https://www.youtube.com/watch?v=IUxhaLvglvk
- http://www.agardenbuilding.co.uk/create-outdoor-sauna-room.html
About This Article
Thanks to all authors for creating a page that has been read 793,017 times.
Reader Success Stories
- "It helped me to think more about building a sauna. My wife will decide. Thank you."
Advertisement