How to Build a Concrete Driveway

Co-authored by Benjamin Hansen

Last Updated: May 27, 2024 Fact Checked

Concrete driveways are permanent, low maintenance additions to your home that can improve its appearance, give kids a safe place to ride scooters, decrease erosion, and make keeping your car clean easier. Building one can be labor-intensive and costly, but for folks that aren’t afraid to tackle big jobs, building your own driveway can be a rewarding project, just as long as you keep some safety rules in mind.

Part 1

Part 1 of 3:

Making a Plan

Download Article

1
Check local ordinances to know if you need a permit. Depending on where you live, you may need to get a permit before you can get started building your new concrete driveway. In some states, the height of the driveway above even ground and the width of the driveway you plan to make it may each determine whether or not you need to pull a permit. ^{[1]
X
Research source}
- If your neighborhood has a homeowner’s association, they may also have rules about how and where you install your driveway.
- You can usually find permit applications on your city’s website.
2
Plan your driveway’s size, shape and route. Draw out the basic outline of your driveway. You will want to consider the overall length and width, as well as where you’ll park your vehicles and whether or not you’ll need space to turn around. In general, it’s recommended that you allow at least 18 feet (5.5 m) to 20 feet (6.1 m) for a car and 22 feet (6.7 m) to 24 feet (7.3 m) for vans or trucks. ^{[2]
X
Research source}
- A single vehicle needs a width of 10 feet (3.0 m) to 12 feet (3.7 m).
- Remember, every foot you add to the length of width of the driveway increases the expense significantly.
- You’ll be able to use the drawing to determine how much material you need to purchase.
Advertisement
3
Determine how much concrete you’ll need. Concrete is sold in cubic yards, so you’ll need to convert your measurements to feet for this calculation if they’re not already. To determine how many cubic yards of concrete you’ll need, multiply the length of your driveway by the width, then multiply that number by .35 (which is 4 inches (10 cm) in terms of feet). Take that final figure and divide it by 27, which is the number of cubic feet in one cubic yard. ^{[3]
X
Research source}
- Multiply the length by the width and depth, then divide that figure by 27. Your answer will be how much concrete to order (in cubic yards).
- You may want to increase your order by about 10% to allow for spillages and mistakes.
4
Decide on your forms and reinforcement materials. You will need wood to build your forms and stakes to reinforce them, all of which needs to be accounted for in your budget. Pine board that measures 1 inch (2.5 cm) by 4 inches (10 cm) is usually sufficient for laying a driveway, as well as a number of 4 inches (10 cm) stakes. ^{[4]
X
Research source}
- Your pine board will need to be long enough to enclose the entire driveway as you pour the concrete.
5
Do a cost estimate using your concrete order and other supplies. Be sure to include the cost of any equipment you will rent for grading or finishing, and the cost of labor if you intend to hire workers to help with the project. ^{[5]
X
Research source}
- Other materials to account for in your estimate include gravel for the base, fabric underlayment, installation labor, delivery charges, sleeving materials, rebar or mesh wire, and any equipment fees.
- You may also need to account for the cost of the permit.
6
Add sand or clay to firm up the soil. You’ll need a firm, solid base to support the weight of your concrete. If the base soil is sandy and loose, you can add clay to firm it up. If the soil is too loamy, add sand or gravel to make it level. Whether you add material or not, you should compact the soil to make it firm and even. ^{[6]
X
Research source}
- You can create a base using gravel or crushed rock, filling soft spots with extra material.
- Vibratory plate compactors and rammers can be used to compact and flatten the soil and gravel you lay down.

Part 2

Part 2 of 3:

Preparing the Driveway for Concrete

Download Article

1
Lay out the shape of your driveway with stakes. You can do this by driving small wooden or metal stakes at points where the drive will egress the street, then at the top of the driveway, then tying builder's line on them, to help you visualize the path of the driveway.
- Check frequently to ensure your layout matches the driveway plan you developed.
- Be sure the length and width are correct, otherwise you may end up over or under ordering the concrete.
2
Install the forms for your driveway. Typically, these will be 1 inch (2.5 cm) by 4 inches (10 cm) pieces of nominal lumber, anchored with wooden stakes sufficiently to support the form boards. These stakes are driven into the soil with a sledgehammer at a spacing to keep the form boards 'on grade and straightly aligned. For curving drives, Masonite or plywood that is strong enough to support the concrete load, but flexible enough to bend.
- Using screws and a power drill will make it easy to assemble and then disassemble your forms when you’re done.
- Place your stakes every 3 feet (0.91 m) or so to make sure the form holds.
3
Excavate the soil away and backfill with roadbase beneath. ^{[7]
X
Expert Source

Benjamin Hansen
Licensed Landscape Contractor

Expert Interview. 6 October 2020.} Roadbase is a nonspecific compound made of mixed crushed granite and gravel. It stabilizes the ground before you pour concrete. It's not always necessary, but does stabilize your driveway.
- The layer should be about five inches thick when compacted before your pour the concrete. ^{[8]
  X
  Expert Source
  
  Benjamin Hansen
  Licensed Landscape Contractor
  
  Expert Interview. 6 October 2020.}
4
Use fill material to make sure your base is thick enough. Usually driveways are at least 4 inches (10 cm) thick; for heavier vehicles or difficult to stabilize soil conditions, thicker concrete is suggested. Grading is done by placing a straightedge or tying a string across the top of your forms and measuring down to the soil, to the correct depth. When you spot areas that aren’t even with the rest, add material or remove it to make the grade even. ^{[9]
X
Research source}
- Add gravel or crushed rock to places that aren’t as high as the rest.
5
Compact the fill material and soil with a plate compactor. Compactor tools can be rented from a local tool rental establishment, or if there is none available, you can use a hand tamp, from your local hardware store. The important thing is that the compaction of the soil is what will support the weight of the concrete, as well as the subsequent load of vehicles using the drive, so it’s important to have compacted, stable fill material. ^{[10]
X
Research source}
- Adding a little water as you compact the material can make the process more effective.
- You may need to use more fill material on looser soil to keep it even.
6
Add reinforcing steel to the concrete if you choose. This can be a mat of steel reinforcing bars tied in place, typically number 4 rebar on 12 inch (30.5 cm) centers, or 6X6 welded wire reinforcing wire fabric, available at building supply stores. Another option is to have polypropylene fiber reinforcing added to the concrete mixture at the concrete plant.
- Adding a steel reinforcement will significantly increase the strength of your driveway and is highly recommended.
- The steel will help the concrete support and distribute the weight of your vehicles.
- Rebar or heavy-duty mesh ensures the concrete will remain structurally intact. ^{[11]
  X
  Expert Source
  
  Benjamin Hansen
  Licensed Landscape Contractor
  
  Expert Interview. 6 October 2020.}
Empower homeowners with confidence to DIY. "As a total newbie homeowner doing my first big reno project, I was intimidated to pour my own driveway slab. But the clear, step-by-step guidelines here broke everything down in an approachable way. I came away understanding exactly what's involved at each phase so I could realistically evaluate if I was up for the DIY challenge. The insights gave me the confidence to go for it!" - Neil G.

Verify protocol meets code and best practices. "With over 20 years under my belt as a concrete contractor, I carefully vetted each step here to confirm precise alignment with local building codes and ideal construction methods. This is one of the most reliable references out there for properly pouring residential driveway slabs built to last. As a pro, I'd endorse these techniques to meet regulations anywhere." - Davis L.

Discover modern material innovations. "I've been mixing and finishing concrete for decades, but I was totally unaware of newer fiber-reinforced concrete options that let you skip the wire mesh entirely. That tidbit alone is invaluable insider knowledge that will simplify my next driveway project big time! Even as an experienced pro, I discovered insights here that will upgrade my approach." - Derik K.

Equip homeowners to self-advocate on contracts. "As I researched contractors to hire out my new driveway addition, the clear explanations of the exact specifications here empowered me to intelligently assess bids and progress. Now, I can steer the outcome rather than leaving everything to the contractor. These guidelines were invaluable for this homeowner to self-advocate!" - Densel K.

Did you know that wikiHow has collected over 365,000 reader stories since it started in 2005? We’d love to hear from you! Share your story here .

Part 3

Part 3 of 3:

Pouring and Curing the Concrete

Download Article

1
Pour the concrete from the truck or wheelbarrow. You’ll need to be able to pour the concrete fairly quickly, and wheel barrowing the concrete the length of a substantial driveway is labor-intensive. If you cannot get the concrete trucks in a position to pour their payload directly into your forms, consider hiring a concrete pumping contractor to place the material for you. ^{[12]
X
Research source}
- You can also rent a piece of equipment with a front bucket, such as a skid steer, tractor, or a mechanical-engine powered wheelbarrow to make the job easier.
- For smaller driveways, a wheelbarrow will likely suffice.
2
Flatten and level the slab as desired. You will want to get the surface as flat (note, this does not mean level) as possible to avoid bird baths, or standing water, on it. The driveway may slope, but should still be flat.
- Not all driveways are level, but the surface should be fairly flat.
- You can use a hand trowel to make the surface evenly flat.
3
Put in contraction joints about 1 inch (2.5 cm) deep. Concrete will contract as it dries, which can result in cracking. Avoid this by using wood or plastic “zip strips” to add 1 inch (2.5 cm) deep “cracks” or cuts in the concrete every 4 feet (1.2 m) or so. ^{[13]
X
Research source}
- If you let the concrete dry too much, you may need to use a specialized saw to cut contraction joints in, so it’s best to do it early.
- Make sure you separate the contraction joints by the same distance to keep the driveway looking uniform.
4
Use a brook or sack to add texture to the concrete. Perfectly smooth concrete may make it difficult for your vehicle to get traction, especially in wet conditions. Drag a broom or a burlap sack along the concrete as its drying to create a textured surface your tires can grip. ^{[14]
X
Research source}
- This step must be done while the concrete is still damp enough to accept the texture.
- Broom the concrete in the direction you want your driveway to drain if there is a slope.
5
Cure the concrete . This is done by creating a moisture retaining barrier on the concrete's surface, either with a layer of plastic sheeting or by applying a chemical curing compound to prevent the concrete from drying out too quickly. ^{[15]
X
Research source}
- You should protect your concrete drive from extreme weather conditions for at least 3-7 days.
- Do not park your vehicle on the driveway until it has cured.
6
Park your car on your new driveway. The first time you park your vehicle on the driveway, lookout for signs of cracking or crumbling. If some cracks do appear, you may be able to repair them. You can then remove the wooden framing you built for the pour. ^{[16]
X
Research source}
- Be sure the concrete is completely cured before parking a vehicle on it, otherwise you may damage the concrete.
- To be safe, wait a minimum of three days for the concrete to cure.

Expert Q&A

Search

Add New Question

Question

Can you pour concrete directly on dirt?

Benjamin Hansen
Licensed Landscape Contractor
Benjamin Hansen is a Landscape Contractor and the Owner of Artscape Gardens, a boutique landscaping company in Los Angeles, California. With over 12 years of experience, Benjamin specializes in transforming properties into aesthetic, functional, and drought-tolerant oases. Benjamin uses color scheme, dimension, and water conscious spaces to inspire the design and installation of soft scape, hardscape, patios, pathways, irrigation, drainage, fencing, concrete, lighting, and electrical work. Artscape Gardens covers all areas of the C-27 landscape contractor classification.

Benjamin Hansen

Licensed Landscape Contractor

Expert Answer

In most cases, I recommend excavating the soil away and backfilling it with roadbase underneath. This stabilizes the driveway. You'll also want to use either rebar or heavy-duty mesh to make sure the driveway will remain structurally intact no matter the amount of traffic it has to take.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 6
Question

Is rebar necessary for a concrete driveway?

Benjamin Hansen
Licensed Landscape Contractor
Benjamin Hansen is a Landscape Contractor and the Owner of Artscape Gardens, a boutique landscaping company in Los Angeles, California. With over 12 years of experience, Benjamin specializes in transforming properties into aesthetic, functional, and drought-tolerant oases. Benjamin uses color scheme, dimension, and water conscious spaces to inspire the design and installation of soft scape, hardscape, patios, pathways, irrigation, drainage, fencing, concrete, lighting, and electrical work. Artscape Gardens covers all areas of the C-27 landscape contractor classification.

Benjamin Hansen

Licensed Landscape Contractor

Expert Answer

You don't have to use rebar. However, putting down rebar or heavy-duty mesh will help your concrete driveway remain structurally intact.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 5
Question

How thick does the roadbase for a concrete driveway have to be?

Benjamin Hansen
Licensed Landscape Contractor
Benjamin Hansen is a Landscape Contractor and the Owner of Artscape Gardens, a boutique landscaping company in Los Angeles, California. With over 12 years of experience, Benjamin specializes in transforming properties into aesthetic, functional, and drought-tolerant oases. Benjamin uses color scheme, dimension, and water conscious spaces to inspire the design and installation of soft scape, hardscape, patios, pathways, irrigation, drainage, fencing, concrete, lighting, and electrical work. Artscape Gardens covers all areas of the C-27 landscape contractor classification.

Benjamin Hansen

Licensed Landscape Contractor

Expert Answer

The roadbase should be about 5 inches thick after it's compacted. Then, you can pour the concrete.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Select the location of your driveway carefully, considering future plans for any additions to your home or other building projects that it may interfere with.

Thanks
Helpful 1 Not Helpful 0
Use caution when allowing concrete delivery trucks on to your property. Concrete trucks often weigh in excess of 65,000 lbs. In areas with soft or even slightly damp soil these heavy trucks will often leave deep tire ruts in the turf that are hard to repair (due to the soil compression). It is often better when pouring a driveway to have the truck drive on the freshly laid and compacted gravel base layer. Use caution when allowing heavy vehicles over curbs as they can crush the edges of existing curbs and roadways.

Thanks
Helpful 1 Not Helpful 0
Consider alternative materials for your drive, such as brick, compacted crushed rock, or concrete pavers .

Thanks
Helpful 0 Not Helpful 1

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Concrete can be difficult to grade, level, and finish. Failure to complete the finishing work will result in less than desirable results.

Thanks
Helpful 31 Not Helpful 13
Wear and use proper personal protective equipment during all phases of work. Concrete can cause severe burns and contact dermatitis. Avoid contact with the skin, especially kneeling in the concrete, or getting it into boots. Thoroughly wash any affected area immediately. In case of contact with eyes, irrigate thoroughly and seek medical attention immediately. Burns can appear after several hours and may not appear straightaway.

Thanks
Helpful 0 Not Helpful 1
Concrete is an extremely heavy material which can weigh more than 140 lbs per cubic foot. Shoveling, lifting, raking, or carrying concrete in buckets may cause severe muscle strain in your back, arms, or legs.

Thanks
Helpful 0 Not Helpful 0

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

Expert Source

Benjamin Hansen
Licensed Landscape Contractor

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

Log in

How to Build a Concrete Driveway

Steps

Making a Plan

Preparing the Driveway for Concrete

Pouring and Curing the Concrete

Expert Q&A

Video

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories