Download Article
A step-by-step guide to plan and construct a sturdy dry stack retaining rock wall
Download Article
Are you looking to add another dimension to your property with your own two hands? Dry stack rock or rubble stone walls add a great touch to flowerbeds and landscape projects. Fortunately, building one is easy enough that you can do it yourself!
Steps
-
Plan your project. Decide how wide and long you'd like your rock wall to be, and make sure that this is feasible with the location of your wall.
- Dry stacked rock walls are typically built against a hillside, as it can be used as a tool to prevent soil erosion from ruining a garden [1] X Research source
-
Select your stones from a stone supply yard. Give a representative your measurements, as that affects the quantity and size of stones you need. Dry stack walls can typically be made from three types of stones: round field stones, relatively flat stacking stones and uniformly cut dressed stones. [2] X Research source
- Each type will give your wall a different look and feel, so make sure you look at pictures to determine which would be the best fit for your house and landscape.
- Note that flatter stones tend to be easier to work with than rounder ones, as they are more suited for stacking.
Advertisement -
Lay out the wall area and direction. You may be cutting away a bank (shown below) or building the wall and back filling as you go, in order to create a terrace effect. Pull a string line the length of the wall (about 8 inches (20.5 cm) off the ground level) to define the front of the wall.
- Freestanding dry rock walls can be stable if they are up to three feet in height [3] X Research source
-
Dig a ditch the length of the wall that is about a foot wide and 8 to 12 inches (20.5 cm - 30.5 cm) below the ground level. This ditch will act as the wall's footing and prevent the rocks from sliding forward due to pressure from the earth behind. [4] X Research source
- Try to cut the ditch into native soil rather than loose added soil, as the former provides a more stable foundation for the wall.
- Level the foundation trench. Smooth over the ground beneath your wall with a shovel, and line it with crushed stone pieces called stone screenings, stone dust or fines. This material will also be useful for filling in gaps.
-
Stack the larger rocks in the ditch. Place the flat side facing forward, and slanted back about 8 degrees. The rock should just miss touching the string line, and be supported by dirt filled in behind it. Do this for the length of the wall, with each large rock touching the one next to it. [5] X Research source
-
Fill dirt behind the large rocks and tap the earth firmly, while letting the 8 degree slant hold the rock in place by gravity. [6] X Research source
- Avoid large vertical gaps in your wall. Try to rearrange the stones so that those don't appear.
-
Find complementary rocks to fill in the spaces in between the large rocks. These rocks may be smaller, but need to be a shape that fills the void between the large rocks. Lay the rock flat side out and support it with earth filled in behind it. These rocks also lay back by 8 degrees.
-
Continue placing the second layer of rocks, so that spaces between the first layer of large rocks are filled. Fill out the entire span of the trench. You can add water to the fill to make it settle.
-
Square off the top of the wall with smaller stones to give it a neat, straight and flat appearance.
Advertisement
What Should I Know Before Building a Retaining Wall?
Community Q&A
Search
-
QuestionIs 8 degrees 1/4 - 1 slope? Meaning the wall leans by 1 foot run to 4 foot rise?Community AnswerNo. sin(8*) ~ .14, so for every foot of rise, we should expect 1.66 inches of lean. On a 4 foot wall, that's 6.68 inches of lean.
-
QuestionWhat is the purpose of the lean? Why are the blocks not just stacked flat?Community AnswerThe blocks "lean" into the bank so the wall is more structurally stable. Gravity holds the wall in place. With a flat wall the balance is significantly more precarious.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- The first row of rock should be larger than a bowling ball but small enough to move by yourself or with a helper.Thanks
- Use a crowbar to pack dirt in between the rocks.Thanks
- Mix stone sizes throughout the wall to create an even, fit-together look.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don't lift rocks that are too heavy or you may cause yourself back problems.Thanks
- Call before you dig if there is a service provided in your country that helps to identify underground utility lines. This will help save you from damage, injury, and fines.Thanks
- Walls should be no higher than three feet.Thanks
- Many cities, towns and municipalities require a professional engineer's sign and seal or some other form of certification for any retaining wall that exceeds three feet. Make sure to check with your local building department or local government sector responsible for building.Thanks
Advertisement
Things You'll Need
- Stones to stack the wall with
- Stone screenings (also called stone dust or fines)
- Earth for filling
- Tools for cutting away embankment
- Level
- String
- Wooden stakes
- Long-handled shovel
- Hammer
- Chisel
- Wheelbarrow/garden cart
- Gloves
References
- ↑ http://www.pallensmith.com/articles/dry-stack-retaining-wall
- ↑ http://www.pallensmith.com/articles/dry-stack-retaining-wall
- ↑ http://www.pallensmith.com/articles/dry-stack-retaining-wall
- ↑ https://wattersgardencenter.com/beginners-guide-to-building-stone-retaining-walls/
- ↑ https://www.finegardening.com/article/build-a-dry-stacked-stone-retaining-wall
- ↑ https://thefield.asla.org/2015/03/24/dry-stacked-stone-walls/
- https://thestonetrust.org/resource-information/how-to/
About This Article
Thanks to all authors for creating a page that has been read 625,368 times.
Advertisement