How to Build a Raccoon Trap

PDF download Download Article
PDF download Download Article

While raccoons may look cute, they can make a mess in your yard when they’re foraging for food at night and they may carry infectious diseases, such as rabies. If you notice that raccoons are in your area, setting traps is the easiest way to catch and relocate them to a different location. Building a live trap is relatively simple with a few tools and can be used repeatedly if your raccoon problem persists.

Method 1
Method 1 of 3:

Building a Wooden Box Trap

PDF download Download Article
  1. Look for 1 ⁄ 2  in (1.3 cm) plywood treated for outdoor use so it doesn’t develop mold or rot. Use a handsaw or circular saw to cut plywood to size for your box. Cut 1 piece that’s 12 in × 22 in (30 cm × 56 cm), 1 piece that’s 12 in × 12 in (30 cm × 30 cm), and 3 pieces that are 12 in × 24 in (30 cm × 61 cm). [1]
    • The 3 pieces that are 12 in × 24 in (30 cm × 61 cm) will be the bottom and the walls of your trap.
    • The 12 in × 22 in (30 cm × 56 cm) piece will be the top of your trap with room so the trap door.
    • The 12 in × 12 in (30 cm × 30 cm) will be the back piece.
  2. Lay one of your 12 in × 24 in (30 cm × 61 cm) boards on a flat surface and measure in 1 ⁄ 2  in (1.3 cm) from the long sides. Mark the distance with a pencil and lay 2 wood pieces that are 3 ⁄ 4 ×  3 ⁄ 4 × 22 in (1.9 × 1.9 × 55.9 cm) on the insides of your lines. Use 3 screws in each wood piece and an electric screwdriver to attach them to the bottom. [2]
    • The wooden pieces will act as braces to make your box trap stronger.
    • Make sure that one end of your wooden braces is flush with one of the short sides of the bottom. This way, your trap door will have room shut.
    Advertisement
  3. Use a metal-cutting blade on your angle grinder to easily cut through the metal panel. Cut 1 panel that’s 10 in × 11 in (25 cm × 28 cm) to use for your trap door and another panel that’s 9 in × 3 in (22.9 cm × 7.6 cm) for a trigger that will spring the trap. [3]
    • Always wear safety glasses when cutting through metal so you don’t get any shavings in your eyes.
    • If the metal has sharp edges, use a grinding bit on your angle grinder to smooth it out so you don’t hurt the raccoon while it’s in the trap.
  4. Use a 1 ⁄ 8 – 1 ⁄ 4  in (0.32–0.64 cm) drill bit meant for going through metal. Use a slow speed with firm pressure as you push the drill through your steel. Make a hole in one of the corners on each both of your metal plates so you can feed a wire through them to make a trigger for your trap. [4]
  5. Screw 1-2 sets of hinges onto the bottom of the smaller metal panel. Make sure the hole you drilled is on the upper left or right corner of the panel. Attach the hinges to the bottom of your box trap so it’s about 5 in (13 cm) from the back wall. [5]
    • The metal panel acts as a trigger to set and activate the trap once a raccoon steps on it.
  6. Use the bottom braces as anchor points for your screws. Put in 3-4 screws per side with an electric screwdriver to attach the walls for your box trap. Once the walls are secure, put the top panel of wood on your box trap so it’s flush with the back wall. [6]

    Tip: If you want to see into your trap to check if you caught a raccoon, cut out a 4 in × 6 in (10 cm × 15 cm) window in one of the wall pieces and cover it with chicken wire. Secure the chicken wire in place with staples every 1 in (2.5 cm).

  7. Use an angle grinder or a circular saw to make your cuts. Clamp the pipe so it doesn’t move around as you saw it. Start at one end of the pipe and cut it in half. When you’re finished, you should have two 20 in (51 cm) long halves. [7]
    • The PVC pipe makes it easier for the door to drop without getting stuck.
  8. Place the pipe halves against at the front of your trap so the rounded edges touch the walls. Use 2-3 screws per pipe to attach it to the wall pieces. Slide the 10 in × 11 in (25 cm × 28 cm) metal panel between the PVC pipes to make a door. Make sure the corner where you drilled the hole is on the bottom of the door. [8]
    • Test dropping your door down into the pipes to see if it catches on any of the screws. If it does, try to make them tighter and more flush with the inside of the pipe.
  9. Loop the wire through the hole in the 9 in × 3 in (22.9 cm × 7.6 cm) panel, and wrap it around itself so it holds firmly. Run the wire through the hole in the bottom of the door so it extends out by 1 ⁄ 2  in (1.3 cm). [9]
    • Wire can be purchased from any hardware store.
    10. Advertisement
Method 2
Method 2 of 3:

Making a Garbage Can Trap

PDF download Download Article
  1. You can use either a metal or plastic garbage can as long as it’s smooth on the inside. Place the garbage right next to a picnic table of a similar height. Make sure the edge of your garbage can touches the edge of your table.
    • If you don’t have a picnic table you can use, then use another sturdy structure that’s the same height as your garbage and that raccoons can easily climb onto.
  2. Use your hose to put water into your garbage can. Keep it filled 6 in (15 cm) to keep the garbage can from falling over and so the raccoon can’t jump out once you’ve captured it.
    • This amount of water is enough to keep the garbage can from tipping over, but isn't enough to hurt or drown the raccoon.
    • The water will weight down the raccoon’s fur, making it difficult for them to jump out or knock the can over.
  3. Set a 2 in × 4 in (5.1 cm × 10.2 cm) board that’s 18 in (46 cm) long on your picnic table. Slide the board out so it extends halfway across the opening of the garbage can. When the raccoon steps on the board over the garbage can, the weight will shift and cause the raccoon to fall in.
    4. Advertisement
Method 3
Method 3 of 3:

Baiting and Catching Raccoons

PDF download Download Article
  1. Choose white food like marshmallows or eggs since they’re easier for nocturnal animals to see. Other baits that may work to catch raccoons include apples, fish, and dry fish cat food. If you’re using a box trap, place your bait inside against the back wall so the raccoon needs to walk completely inside. If you’re using a garbage can trap, place your bait on the end of the board over the garbage can. [10]
    • You may also buy commercial raccoon bait from outdoor care stores or online.
    • Place your bait right before it gets dark so birds don’t eat it first.
  2. Look for raccoons in your trap in the morning and in the early evening. Since raccoons are nocturnal, most times they’ll enter your trap in the middle the night. When you see that the trap is set, take it out of your yard so you can release the raccoon somewhere else. [11]
    • Change your bait every 2 days if it’s uneaten.
    • If you accidentally catch an animal besides a raccoon, you can choose to release it back in your yard or transport it somewhere else.
  3. Once you capture a raccoon, transport the animal to an unpopulated area at least 3 mi (4.8 km) away from where you captured it. When you let the raccoon go, point the trap away from you and lift the door so it can run out without coming near you. [12]
    • If you use a garbage can trap, put a lid on the garbage can first before transporting it.
    • Wear gloves if you’re worried about getting bitten.

    Warning: Raccoons can carry diseases, such as rabies, salmonella, and E. Coli. Be careful while transporting or handling a raccoon that’s been trapped. [13]

    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you befriend a raccoon?
    Hussam Bin Break
    Pest Control Professional
    Hussam Bin Break is a Certified Commercial Pesticide Applicator and Operations Manager. He and his brother Hussam co-founded Diagno Pest Control in the greater Philadelphia area in 2018, and have since expanded their services to include the New Jersey market. Diagno Pest Control has received Home Advisor's Top Rated and Elite Service Badges for quality of work and customer service.
    Hussam Bin Break
    Pest Control Professional
    Expert Answer
    I wouldn't recommend it. Raccoons can carry diseases like rabies, salmonella, and E. Coli, so you shouldn't get too close if you don’t need to.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      Building a Wooden Box Trap

      • 1 piece of 12 × 24 ×  1 ⁄ 2  in (30.5 × 61.0 × 1.3 cm) plywood
      • 1 piece of 12 × 22 ×  1 ⁄ 2  in (30.5 × 55.9 × 1.3 cm) plywood
      • 1 piece of 12 × 12 ×  1 ⁄ 2  in (30.5 × 30.5 × 1.3 cm) plywood
      • 2 pieces of 11 × 24 ×  1 ⁄ 2  in (27.9 × 61.0 × 1.3 cm) plywood
      • 2 pieces of 3 ⁄ 4 ×  3 ⁄ 4 × 22 in (1.9 × 1.9 × 55.9 cm) wood
      • Handsaw or circular saw
      • Electric screwdriver
      • Screws
      • Angle grinder
      • 9 in × 3 in (22.9 cm × 7.6 cm) metal plate
      • 2 hinges
      • 8- to 10-gauge wire
      • 10 in × 11 in (25 cm × 28 cm) metal plate
      • 20 in (51 cm) PVC pipe

      Making a Garbage Can Trap

      • Garbage can
      • Picnic table
      • Hose
      • 2 × 4 × 18 in (5.1 × 10.2 × 45.7 cm) board

      Baiting and Catching Raccoons

      • Marshmallows, fish cat food, or apples

      You Might Also Like

      How to
      Trap a Coyote
      How to
      Scare Monkeys Away from Your Home or Yard
      How to
      Survive a Tiger Attack
      How to
      Survive a Wolf Attack
      How to
      Identify Shark Teeth
      What to Feed Local Deer (and When You Should Do It)
      How to
      Own a Pet Wolf
      How to
      Make a Squirrel Feeder
      How to
      Tell the Difference Between a Crocodile and an Alligator
      How to
      Feed a Sugar Glider
      How to
      Trap a Fox Quickly & Safely
      Are Skunks and Polecats the Same? How to Tell These Animals Apart
      How to
      Survive a Cheetah Attack
      How to
      Attract Foxes
      Advertisement

      References

      1. ↑ https://youtu.be/iff50nkoq7A?t=232
      2. ↑ https://youtu.be/iff50nkoq7A?t=483
      3. ↑ https://youtu.be/iff50nkoq7A?t=642
      4. ↑ https://youtu.be/iff50nkoq7A?t=816
      5. ↑ https://youtu.be/iff50nkoq7A?t=819
      6. ↑ https://youtu.be/iff50nkoq7A?t=568
      7. ↑ https://youtu.be/iff50nkoq7A?t=690
      8. ↑ https://youtu.be/iff50nkoq7A?t=690
      9. ↑ https://youtu.be/iff50nkoq7A?t=816
      1. ↑ https://youtu.be/Xr0yolfTp8Y?t=12
      2. ↑ https://www.almanac.com/pest/raccoons
      3. ↑ https://www.almanac.com/pest/raccoons
      4. ↑ http://www.dem.ri.gov/programs/bnatres/agricult/pdf/raccoons.pdf

      About This Article

      Thanks to all authors for creating a page that has been read 72,755 times.

      Did this article help you?

      Advertisement