How to Build an Acrylic Aquarium

PDF download Download Article
PDF download Download Article

If you’re planning to build your own aquarium, you may be considering opting for acrylic instead of glass. Not only is acrylic lighter than glass and less likely to shatter, but it’s also easily molded, making it an ideal choice for a do-it-yourself aquarium project. With some basic carpentry skills and a little elbow grease, building your own acrylic aquarium can be an easy, rewarding, and cost-effective project for the would-be aquarium enthusiast.

Part 1
Part 1 of 3:

Choosing Acrylic Sheets

PDF download Download Article
  1. The ultimate size of your aquarium will depend on a number of important factors, such as the amount of space available in your home and the number and type of fish you’d like to keep.
    • The rule of thumb for determining proper aquarium size is to allocate 1 gallon (3.8 L) of water per 1 inch (2.5 cm) of maximum length for each fish. That might not be accurate depending on the species you have in the aquarium, since two fishes of the same length can have much different body masses, and how much food they consume and how much waste they produce can be very different. When in doubt, talk to a professional about the species you want to add to the aquarium.
    • Make sure you’re also able to allocate enough space for accessories for the aquarium, such as filters, tubing, and cords.
  2. You can buy acrylic from a local plastic shop, or purchase it from an online retailer if need be.
    • For aquariums, most manufacturers recommend using Cell Cast acrylic sheet. [1]
    • Many plastic shops will cut the acrylic for you for free if you tell them the dimensions you need the pieces to be. Consider going this route to save yourself time and energy. [2]
    Advertisement
  3. The thickness of the acrylic you’ll need to use will be directly dependent on the dimensions of the aquarium you’re building.
    • For aquariums 1 foot (0.30 m) or less in height, use acrylic that is .25 inches (0.64 cm) thick. For every additional 6 inches (15 cm) in height, make the acrylic an additional .125 inches (0.32 cm) thicker. [3]
    4. Advertisement
Part 2
Part 2 of 3:

Cutting and Sanding the Acrylic

PDF download Download Article
  1. Not only will you need ample workspace to construct your aquarium, but cutting acrylic produces a strong and persistent odor. Consider carrying out this project outside or in a garage with good ventilation. [4]
    • Because your project will involve cementing pieces together and waiting for them to dry before proceeding, make sure your materials are always nearby and that you won’t have to continually leave your workspace to fetch what you need.
  2. This is only necessary if you didn’t or couldn’t cut your acrylic at the plastic shop. Use a table saw with closely spaced teeth to avoid chipping the plastic. [5]
    • Measure and mark the acrylic before cutting it, according to the dimensions you determined earlier.
    • Cut your acrylic into 5 pieces: 1 piece to serve as the bottom of the tank; 2 longer pieces to serve as the front and back of the tank; and 2 shorter pieces to serve as the sides.
    • Make sure the front and back pieces are equal to each other in length. Do the same for the 2 shorter pieces.
  3. You’ll need to make sure the edges of your acrylic are smooth and finished before attaching them together. Sanding will also remove unsightly cutting marks.
    • Lay a sheet of 320 grit sandpaper on a flat work surface. Holding the acrylic vertically, run the edge along the sandpaper to achieve the desired effect. [6]
    • In order to keep the acrylic edge flat and square during the sanding process, and to avoid unintentional scuff marks on the plastic, hold it up next to a flat piece of 2x4 lumber while moving it along the sandpaper.
    4. Advertisement
Part 3
Part 3 of 3:

Assembling Your Aquarium

PDF download Download Article
  1. You’ll need to work on a flat surface that will support your acrylic and keep it level for hours at a time. [7]
    • Your aquarium will need to be kept on a stand to prevent the bottom of the tank from bending under the weight of the water. Consider building your aquarium on the surface you intend to ultimately place it in your home, to avoid moving the aquarium after completion.
  2. You can use tape or a clamp to attach the pieces together. What’s most important is that you place several pins between the pieces to leave a small amount of space between them.
    • While tape will allow you more dexterity, clamps will prevent the pieces from sliding around on the pins. [8]
    • Use ordinary size-17 ball head pins that are roughly 1.0625 inches (26.99 mm) long in between the acrylic pieces. These can be bought at any home improvement store or mass retail store.
    • Place the pins across the joint between the pieces at even intervals. Place enough to ensure you’ll have enough room to apply cement between the pieces of acrylic.
  3. Remove the pins from between the joints as you apply the cement. Let the cement dry for four hours before proceeding to the next step. [9]
    • Use a syringe filled with acrylic cement to insert the cement into the joint.
    • After the cement has been applied, immediately remove the pins. The cement will then fuse together and begin welding the plastic pieces to one another. [10]
    • The pins should be removed within 30 to 60 seconds of applying the cement. [11]
  4. Make sure you wait 4 hours before cementing each individual piece of acrylic to yield the best results. After this process the basic structure of your aquarium will be finished. [12]
    • You can also cut and attach a top piece of acrylic to your aquarium, fitted out with holes and openings for a lid, tubing, and other accessories. However, this is not absolutely necessary.
  5. You’ll need to make sure there are no gaps in your aquarium that may lead to leaks or cause your aquarium to fall apart. Wait at least 48 hours for the aquarium to cure before testing it. [13]
    • A convenient way to test the aquarium is to place it in a bathtub full of water and lay newspaper at the bottom of the tank. If the newspaper gets wet, you’ll know your aquarium has a leak.
    • You can also test your aquarium by filling it with water, although this method may prove more cumbersome and ultimately damaging to the stand supporting the aquarium if you should find a leak.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Which acrylic glue should I use?
    Community Answer
    One that's specifically marketed as aquarium-safe. Check with your local pet store or shop online for one.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 16
  • Question
    Do I put the walls on top of or next to the base?
    Roy Harvey
    Community Answer
    On top, and align the outer edges holding the wall vertical with a heavy box or similar. The walls need to be the same length as the base, which makes cutting easier too.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 5
  • Question
    Should the front panel be on the top side or side of the bottom panel?
    Roy Harvey
    Community Answer
    On the top side for ease of assembly and strength, but you can put it on the side if you don't want the joint showing.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 6
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • After purchasing your acrylic, carry out a dry run by taping the pieces together with masking tape to ensure that they will all fit together. If you find out they won’t fit after already beginning the welding process, you won’t be able to separate the pieces without breaking them.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Although acrylic is lightweight and durable, it scratches easily and it's not as clear as glass. Take that into account when choosing the kind of aquarium you want to build.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Acrylic sheets
      • Acrylic cement
      • Syringe
      • Table saw
      • Sandpaper
      • Duct tape for assembly
      • Heavy boxes for support while curing

      You Might Also Like

      How to
      Build an Aquarium Stand
      How to
      Calibrate and Use a pH Meter
      How to
      Make an Aquarium
      How to
      Grow and Propagate a Java Fern
      How to
      Set Up a Freshwater Aquarium
      How to
      Set up a Guppy Tank
      How to
      Get Rid of Snails in an Aquarium
      How to
      Start a Jellyfish Tank
      How to
      Grow Freshwater Aquarium Plants
      How to
      Lower Ammonia Levels in a Fish Tank if They Are Not Very High
      How to
      Make a Fish Tank Divider
      How to
      Clean Aquarium Decorations
      How to
      Make Your Own Underwater Aquarium Filter
      How to
      Do a Fishless Cycle
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about building an aquarium, check out our in-depth interview with Wes Corbyn .

      References

      1. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      2. ↑ https://www.advancedaquarist.com/2007/7/diy
      3. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      4. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      5. ↑ https://www.thesprucepets.com/diy-acrylic-refugium-2925379
      6. ↑ https://www.thesprucepets.com/diy-acrylic-refugium-2925379
      7. ↑ https://www.advancedaquarist.com/2007/7/diy
      8. ↑ https://www.advancedaquarist.com/2007/7/diy
      9. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      1. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      2. ↑ https://www.advancedaquarist.com/2007/7/diy
      3. ↑ https://www.professionalplastics.com/professionalplastics/BuildingAnAquarium2.pdf
      4. ↑ https://www.advancedaquarist.com/2007/7/diy

      About This Article

      Article Summary X

      If you want to build an acrylic aquarium, you’ll need some basic carpentry skills. Once you figure out what size you want your aquarium to be, get enough acrylic sheets to fit its dimensions. Purchase your acrylic sheets at a local plastics store or online. If you have to cut your sheets down to size, many plastic shops will do this for free if you bring in the dimensions. After the sheets have been cut, use sandpaper to smooth out the edges. When your pieces are ready, assemble them by placing your bottom piece on a sturdy area while you use acrylic cement to glue the side pieces on. After all of your pieces are in place and your cement is dry, test your aquarium to make sure it won’t leak. To learn how to decide what size aquarium you’ll need, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 117,318 times.

      Reader Success Stories

      • Allison Augustat

        Feb 16, 2019

        "I followed your directions on building an acrylic aquarium, and it turned out beautifully! I love the manner in ..." more
      Share your story

      Did this article help you?

      Advertisement