How to Make an EMP Generator from a Disposable Camera

PDF download Download Article
Craft a simple miniature EMP machine with readily available supplies
PDF download Download Article

The EMP generator is a popular device for science fiction and action movie writers. Surprisingly enough, there’s some real science in those movies! EMP (or electromagnetic pulse ) generators have the power to knock out electrical signals. We’ll show you how to build a very small version of an EMP generator here. Just as a note, this can be dangerous, so supervise your kids if they want to build one of these and don’t use it without ensuring it’s 100% safe and legal to do so.

Things You Should Know

  • While it's not possible to build a giant EMP bomb like in movies, this process will result in a small handheld EMP device that can zap tiny electronics.
  • Note that it is illegal to use an EMP generator in public or to target another person’s belongings. Only use this device at home and on your own belongings.
  • Do not use an EMP generator near any medical devices or if you have a pacemaker.
Part 1
Part 1 of 3:

Supplies & Important Warnings

PDF download Download Article
  1. You are not able to create the type of EMP you saw in the Matrix movies or Ocean’s 11 . Those would require millions of dollars to build. This type of electromagnetic pulse generator works best for small electronics. [1]
    • Using an EMP outside of your home or on any device owned by someone else is functionally illegal. Do not build an EMP device to use on others. [2]
    • Warning: Do not use an EMP if you or anyone around you has a pacemaker or relies on a medical device to stay alive. An EMP may disable medical devices. [3]
  2. For this EMP you are going to take the circuit board and capacitor out of a disposable camera . [4] The other key supplies you need are a:
    Advertisement
  3. If you’re under the age of 18, ask a parent for help before you start. You are dealing with high-voltage equipment and may get shocked if you aren’t careful. When removing the capacitor in particular, be cautious. It’s also recommended to use a |multimeter to gauge voltages and a battery holder to avoid exposing yourself to shocks. [6]
    • Wear rubber gloves to avoid transferring any shocks you may run into through your body.
    • A multimeter is a tool that measures the electric voltage of a circuit. You don’t need one, but it will tell you the voltage of your capacitor.
    4. Advertisement
Part 2
Part 2 of 3:

Extracting the Circuit Board from the Camera

PDF download Download Article
  1. Pry the case of a camera open using the edge of a screwdriver . Stick the head of your screwdriver in between the two halves of your disposable camera and apply a light amount of force until the case pops open. Be careful not to touch the circuit board or any metal parts inside. [7]
    • You can use any disposable camera for this so long as it has a flash mechanism. The cheaper the better, too. A nicer disposable camera may be harder to open.
  2. You'll be dealing with the potential of getting a painful shock if you accidentally touch the flash capacitor, which carries about 180-300 volts. It’s not enough to seriously injure you most of the time, but it’s better to be safe than sorry. [8]
    • The 180-300 volt shock you could get may be potentially dangerous if you have any kind of heart condition.
  3. The capacitor is usually a black cylinder about the size of a small battery with two leads coming out of the bottom. This is the capacitor. [9]
    • Capacitors store electrical charges and release them when triggered. Disposable cameras need capacitors for the flash function.
  4. Use an instrument with an insulated end to avoid getting shocked (a screwdriver or channel lock with an insulated grip is perfect). Slide the tool’s tip against one of the exposed metal pieces by the flash to discharge the capacitor’s remaining electrical current. You should hear a quick pop and/or a small spark. [10]
    • Once the initial spark has gone off, you shouldn’t need to redo this. As you remove the board, continue checking the soldered sealants on the circuit board by the capacitor.
    • Capacitors store electrical charges, so you have to discharge it to ensure there’s no juice left before you hook it back up.
  5. After carefully taking apart the walls of the disposable camera, remove the board and capacitor by hand. Mark on the battery holder which side is positive and negative with a marker. You’ll be able to tell because there should already be a battery in the machine. [11]
    • Remove the battery from the device for now.
    • The battery holder is connected to the circuit board. You don’t need a separate power source.
    6. Advertisement
Part 3
Part 3 of 3:

Assembling the EMP Generator

PDF download Download Article
  1. Locate your wire and cut it to the desired length. You don’t want too much slack, so anything from 3–12 inches (7.6–30.5 cm) will work. This wire will connect the switch to the capacitor. Strip the ends of each wire from the rubber casing. [12]
  2. Solder the wire to one of the two terminals of the capacitor. Use a quality soldering gun to avoid a messy circuit board. Solder a blob of lead-free rosin core to the surface. Then, heat the wire to the blob with your soldering gun. [13]
    • The resin should dry quickly to a firm connection.
  3. Take the wire you just soldered to the capacitor and attach it to the “off” side of the switch by joining the wires. Either solder the wire onto the switch or wrap the exposed wire end around one of the screwable ports on the switch. [14]
  4. Wrap a strip of tape around whatever small circular object you’re using with the adhesive side facing outward. Now, take the enamel-coated wire and wrap it 7-15 times around the tape. Leave at least 1–2 inches (2.5–5.1 cm) of wire out on each end to attach to the terminals. Don’t overlap any of the coil lengths. Take your time and be precise. Make sure the wire is snug and that there aren’t any spatial gaps. [15]
    • Coat the finished wiring with tape so it’s secure.
    • Slide the wire and tape off of the object.
    • Cut the terminals of the coils to the desired length, but make sure you leave yourself enough room to work with.
  5. Use a sheet of sandpaper to gently file down the ends of the wire to remove the enamel coat. This will create a stronger bond between the individual components. [16]
  6. Attach a strand of coil to the remaining terminal of the capacitor. Use care and don’t create a mess. Use the same resin you used before to connect the coil and capacitor. [17] \
  7. Connect one of the leads of the coil to the other “on” terminal of the switch. You should now have a loop of coil connecting the capacitor to the switch. [18]
    • Reinsert the battery in the circuit board when you’re done.
  8. Use a fresh battery or confirm the old battery works by sticking it in another device. Then, test your new EMP device on a handheld video game, alarm clock, or calculator. Insert the electronic device into the circular coil and flip the EMP switch to see if it shuts off. [19]
    • You can only target items by placing them inside of the coil or directly against the end of the opening. However, objects near the outside of the coil will also likely be damaged.
    • Newer electrical devices are sometimes insulated to protect them from EMP charges, so they may not shut off.
    9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is the theory behind EMP?
    Community Answer
    The idea is that any conductor passing current creates a magnetic field around it (yes, even a simple wire). Also, a magnetic field near a conductor induces a current through said conductor. The EMP (ElectroMagnetic Pulse) device creates a strong magnetic field in a coil of some sort so the nearby electronics are induced current from that magnetic field. Since all ICs are basically transistors, and the transistor is switched by current, the ICs affected by the EMP stop working, and behave unexpectedly (like resetting, sending signals when they're not supposed to, etc.). If the EMP is strong enough, it can completely fry them.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 89
  • Question
    At what distance can you knock out a radio?
    Community Answer
    You will not knock out any radio with this. You will be able to generate a low-power pulse and observe it on a measurement device like an oscilloscope but that's the most interesting thing you can do. This generator does not come close to a human-produced electrostatic discharge in terms of energy. And all electronic devices are shielded against it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 32 Helpful 100
  • Question
    Can you make an EMP that only causes things to quit working for a while?
    Community Answer
    The EMP works by creating a surge in the device. Some devices will corrupt/scramble memory by flipping bits without damaging the components, allowing them to be rewritten to work again. Others will damage components, others will flip bits that are not rewritable and ruin those without factory equipment to rewrite them. There is no 'temporary knockout' EMP, only protected and recoverable devices.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 51
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Feeling adventurous? De-solder the trigger transformer and xenon flash tube from the PCB, and store or discard them as you wish. Alternatively isolate the section of PCB with the charger circuit and cut the rest off.
        Thanks
        Helpful 20 Not Helpful 9

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Discharge the capacitor inside of the disposable camera multiple times just to ensure that you're not going to shock yourself. Capacitors are designed to hold charges for extended periods of time, so "double checking" is important.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not operate near medical equipment or computer equipment. Do not use this if you wear a pacemaker.
        Thanks
        Helpful 274 Not Helpful 63
      • An EMP generator may damage RFID systems or tags.
        Thanks
        Helpful 4 Not Helpful 0
      • It is illegal to use an EMP device for destruction of property or disruption of services.
        Thanks
        Helpful 4 Not Helpful 1
      • Working with high voltages is very dangerous. Always use the correct safety equipment and procedures to prevent harm to you or your items.
        Thanks
        Helpful 2 Not Helpful 0
      Advertisement

      Things You’ll Need

      You Might Also Like

      How to
      Build a Generator
      How to
      Solder Electronics
      How to
      Install a Toggle Switch
      How to
      Make a Simple Electric Generator
      How to
      Make a Simple Electrical Circuit
      How to
      Use a Multimeter
      How to
      Build a Motor
      How to
      Make a Tesla Coil
      How to
      Convert AC to DC
      How to
      Solder Wires, Electronics, and More
      How to
      Mount and Wire a Junction Box
      Simple Electric Motor Project: Materials & Instructions
      How to
      Make a Burning Laser
      How to
      Build a High Powered Laser
      Advertisement

      References

      1. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      2. ↑ https://veteranlife.com/lifestyle/emp/
      3. ↑ https://havokjournal.com/national-security/emps-dont-work-like/
      4. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      5. ↑ http://www.instructables.com/id/EMP-generator/?ALLSTEPS
      6. ↑ https://core.ac.uk/download/pdf/40046443.pdf
      7. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      8. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      9. ↑ https://civilpedia.org/p/?t=Kodak-Flash-Circuits&pid=113
      1. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      2. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      3. ↑ https://www.geekslop.com/life/survival/combat-self-defense/2020/how-to-create-an-emp-generating-device-and-how-to-protect-yourself-from-an-emp-attack
      4. ↑ https://www.geekslop.com/life/survival/combat-self-defense/2020/how-to-create-an-emp-generating-device-and-how-to-protect-yourself-from-an-emp-attack
      5. ↑ https://www.geekslop.com/life/survival/combat-self-defense/2020/how-to-create-an-emp-generating-device-and-how-to-protect-yourself-from-an-emp-attack
      6. ↑ https://www.geekslop.com/life/survival/combat-self-defense/2020/how-to-create-an-emp-generating-device-and-how-to-protect-yourself-from-an-emp-attack
      7. ↑ https://www.geekslop.com/life/survival/combat-self-defense/2020/how-to-create-an-emp-generating-device-and-how-to-protect-yourself-from-an-emp-attack
      8. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      9. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html
      10. ↑ https://www.techworm.net/2016/07/build-mini-emp-generator-disrupt-electronic-gadgets.html

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 1,689,486 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement