How to Build and Use a Pendulum

PDF download Download Article
PDF download Download Article

A pendulum is a device that uses gravity to swing a weight back and forth. Because of their consistent and measurable swings, or oscillations as they’re called, pendulums have been used for hundreds of years to keep time. Part of the beauty of a pendulum is its simplicity. With a few supplies, you can build and use your own pendulum to try out different experiments to see how the physics of a pendulum work.

Method 1
Method 1 of 3:

Making a Simple Pendulum

PDF download Download Article
  1. 1
    Tape a pencil horizontally to the top of a table. Lay a pencil on its side and use clear tape to firmly fasten it to a tabletop. Leave about 1 ⁄ 2 inch (1.3 cm) of the pencil hanging over the edge. The pencil will anchor your pendulum and keep it from falling down, so be sure to use enough tape to secure it and keep it from moving around. [1]
    • Test the pencil by flicking it with your finger. It should stay stuck to the tabletop.
  2. 2
    Tie a loop about 1 inch (2.5 cm) in diameter at one end of a string. Take a length of string 2–3 feet (0.61–0.91 m) long and curl one end to form a loop. The loop needs to fit around the pencil, but not too tight or it won’t swing properly. Tie a knot with the loop to keep it from coming undone. [2]
    • Slide the loop onto the pencil and slide it off to make sure it’s not too tight.
    Advertisement
  3. 3
    Make a small 1 ⁄ 2 inch (1.3 cm) hook with a metal wire. Take a 2 in (5.1 cm) length of metal wire and curl one end of it into a “J” shape to form your hook. The hook will hold the weight that swings the pendulum so shape your hook so it’s easy to attach and remove nuts onto it to alter the weight of the pendulum. [3]
    • You can use pliers to curl the metal wire.
  4. 4
    Slide a 1 ⁄ 4 inch (0.64 cm) nut onto the end of the hook. Use a standard metallic nut as the weight for your pendulum. The hole in the center makes a nut ideal for sliding onto the hook, and you can easily add or remove nuts to experiment with different weights. Slide the nut onto the hook so that it’s not able to fall or slide off when the pendulum swings. [4]
    • Do not close the hook around the nut.

    Tip: Use nuts of the same size and weight so you can experiment with changing the weight to see how it affects the swing of the pendulum.

  5. 5
    Tape a piece of paper on a wall or table behind the hook. You can use the paper to mark where you release the pendulum each time so you can see the way the pendulum behaves and swings based on where you release it. Tape the paper so that it is a backdrop behind the hook with the nut on it. [5]
    • Any color paper is fine, as long as you can see the pencil markings.
    6. Advertisement
Method 2
Method 2 of 3:

Experimenting with the Pendulum

PDF download Download Article
  1. 1
    Pull the hook with the nut on it back about 20 inches (51 cm). Before you release it, use your pencil to mark on the paper taped behind the pendulum where you release it from. That way, you can repeat the experiment by letting the pendulum go from the same place each time. [6]
    • You need to have a consistent release point for accurate results in your experiments!
  2. 2
    Release the pendulum and start a stopwatch. When you release the pendulum, count the number of oscillations, or the number of times it swings back and forth, for 1 minute. Repeat the process 5 times, releasing the pendulum from the same spot on the paper each time. [7]
    • Let the pendulum fall on its own; don’t swing or push it.
    • Write down the number of oscillations so you can calculate an average.
  3. 3
    Calculate the average of the oscillations. Take the number of oscillations from each time you released the pendulum, add them all together, then divide the number by 5. This is the average number of oscillations the pendulum completes from that distance and at that weight. [8]

    For example: If you release the pendulum 5 times, and the number of oscillations you get are 9, 7, 8, 10, and 7, add up all of the numbers to get 41. Divide 41 by 5 to get 8.2 as an average number of oscillations for that experiment.

    4. Advertisement
Method 3
Method 3 of 3:

Testing the Physics of a Pendulum

PDF download Download Article
  1. 1
    Add a nut to the hook to see what difference the mass makes. Add a second nut to the hook and bring the pendulum back to where you marked on the paper the first time. When you release the pendulum, start a stopwatch and count the number of oscillations for 1 minute. Repeat the process 5 times, then calculate your average.
    • Notice the difference in the number of oscillations and the average between 1 nut on the hook and 2 nuts on the hook.
    • Add another nut and repeat the experiment to see if even more mass will affect the pendulum’s oscillations. [9]

    Spolier: Adding weight changes the mass of the pendulum, but mass doesn’t affect the swing rate of a pendulum, so your average number of oscillations should be almost the same, no matter the weight!

  2. 2
    Change the distance to see how it affects the oscillations. Go back to just 1 nut on the hook, bring the string back about 10 inches (25 cm), and make a mark on the paper taped behind it so you can repeat the experiment from the same distance. Release the pendulum and count the number of oscillations for 1 minute. Repeat the process 5 times and calculate an average. [10]
    • You may be surprised to learn that the distance (also called amplitude) does not affect the swing rate, or number of oscillations.
    • Try the experiment again from 5 inches (13 cm) and find the average number of oscillations to see how much of a difference the distance makes.
  3. 3
    Cut off 10 inches (25 cm) of the string to see the effects. Slide the look off of the pencil and cut off 10 inches (25 cm) of string, tie another loop, and put it back on the pencil. Then bring the pendulum back about 10 inches (25 cm) and mark on the paper where you release it from. Repeat the experiment 5 times and find the average number of oscillations to see how the length of the string affects the pendulum.
    • Cut off another 10 inches (25 cm) of string to see the difference it makes on the average number of oscillations.
    • The length from which a pendulum is suspended helps determine the speed and regularity of the swings, which is why pendulums have been used to keep time. [11]
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What's the swinging mass at the end of a pendulum?
    Donagan
    Top Answerer
    It's called a "bob."
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 26
  • Question
    What is the type of pendulum used to communicate with ghosts? Is there an article on that?
    Tivababe77
    Community Answer
    Yes, several. You can search for "Use a Pendulum for Divination," "Use a Pendulum," and "Do a Spirit Guide Communication With a Pendulum" in WikiHow's search bar, or search for pendulums in a normal search engine to bring up results.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 11
  • Question
    It says the amplitude does not affect the oscillation. So if we used a string 2 feet in length, it would swing the same amount of times as if the string were 20 feet?
    Han
    Community Answer
    "Amplitude" refers to how far the pendulum was pulled back from its neutral hanging position, not the length of the string. As for why this works, consider two pendulums with the same mass and length. Pull one higher than the other, and release both at the same time. When the highest pendulum reaches the point where the lower pendulum started, it has already picked up a significant velocity, and it will only keep accelerating. This way, it can traverse the remaining distance in less time than the lower pendulum, and it works just right so that they arrive in the neutral position at the same time. This means they both have the same period, and that period is independent of starting position.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 10
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • A length of string about 2–3 feet (0.61–0.91 m) long
      • 1 piece of metal wire 2 inches (5.1 cm) long
      • 3-4 nuts 1 ⁄ 4 inch (0.64 cm) in size
      • 1 piece of paper
      • Pencil
      • Clear tape

      You Might Also Like

      How to
      Make Baking Soda Snow
      How to
      Create a Potato Battery
      How to
      Make a Volcano
      How to
      Make a Steam Engine
      How to
      Make a Tornado in a Bottle
      How to
      Make a Water Bottle Cap Pop off with Air Pressure
      How to
      Make a Soda Bottle Volcano
      How to
      Adapt a Mousetrap Car for Speed
      How to
      Create a Battery from a Lemon
      How Do a CO₂ Test: Detect & Analyze Carbon Dioxide Gas
      How to
      Make a Windsock for Children
      How to
      Make a Volcano out of Mentos and Soda
      How to
      Build a Fuel Cell
      How to
      Conduct the Squeaky Pop Experiment
      Advertisement

      References

      1. ↑ https://explorable.com/pendulum-experiment
      2. ↑ https://explorable.com/pendulum-experiment
      3. ↑ https://explorable.com/pendulum-experiment
      4. ↑ https://www.scientificamerican.com/article/bring-science-home-swinging-pendulum/
      5. ↑ https://www.scientificamerican.com/article/bring-science-home-swinging-pendulum/
      6. ↑ https://www.scientificamerican.com/article/bring-science-home-swinging-pendulum/
      7. ↑ https://explorable.com/pendulum-experiment
      8. ↑ https://www.mathsisfun.com/mean.html
      9. ↑ https://sciencing.com/affects-swing-rate-pendulum-8113160.html
      1. ↑ https://explorable.com/pendulum-experiment
      2. ↑ https://sciencing.com/uses-pendulums-8541430.html

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 196,846 times.

      Reader Success Stories

      • Kalyani Waydes

        Jul 24, 2019

        "I did this as an assignment for my science project. It was awesome, thanks to wikiHow."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement