Download Article
Everything you need to know about this popular speedsolving method
Download Article
Do you wish you could solve a Rubik's Cube even half as fast as a champion like Max Park? Well, you've come to the right place. If you want to drastically decrease your speedsolving time, it's going to take a lot of practice. That, and the CFOP method! With the help of Rubik's cube artist and champion Timothy Huynh, we'll walk you through the 4 stages of the CFOP process: Cross, first two layers (F2L), orient the last layer (OLL), and permute the last layer (PLL) and give you the algorithms you need to get started.
Using the CFOP Method
The CFOP method allows you to solve a Rubik's cube using 4 steps: Cross, first two layers (F2L), orient the last layer (OLL), then permute the last layer (PLL). This method is favored by the fastest speedsolvers because it relies primarily on muscle memory and algorithms, which allows you to get faster through repetition.
Steps
Section 1 of 6:
The CFOP Speedsolving Method
Download Article
-
Inspection During a speedsolving competition, you have 15 seconds to inspect the scrambled cube before you start solving. CFOP solvers often use this time to work out how to make the white cross, which will be the first stage of the solving method. [1] X Research source
- Huynh notes that the top five-second solvers now "basically know 70% about the whole solution with just inspecting [the cube] in 15 seconds," so this is a very important part of the solving process.
- When you're solving at home, you can take as much time as you want to inspect the cube and visualize your moves. If you're aiming to compete, though, you'll eventually want to start limiting yourself to a maximum of 15 seconds.
-
Cross For the first stage of the CFOP method, the goal is to create a white cross on the bottom face of the cube. While you can use algorithms at this stage, there are really too many to list. Most solvers complete this stage with pattern recognition and intuition. [2] X Research source
- While it does make more sense to solve the cross on the top face and then just flip the cube over, practice doing it on the bottom if you want to eventually reach solve times under 20 seconds.
Advertisement -
First two layers (F2L) When you first started solving, you were likely solving layer by layer. Huynh explains that F2L is "significantly quicker because you're doing two layers at once, but it's much trickier as well because in the beginner's method, you're just focusing on the corners, but in the F2L, you're doing corners and edges at the same time. So you're paying attention to different pieces."
- While there are some algorithms you can learn that will help you solve this stage more efficiently, most players find it easiest to solve by intuition when they're first starting out. [3] X Research source
- With practice, you'll start to recognize patterns and learn the turns you need to make to get the first two layers lined up.
-
Orient last layer (OLL) In this stage, solve the top layer of the cube so that it's all yellow. At this point, you don't have to worry about whether all the side colors match—you'll fix that in the last step. [4] X Research source
- It's usually best to start with the two-look OLL method, which requires learning fewer algorithms (even though it takes a little longer).
- According to Huynh, "two-look OLL is a method you learn pretty much after beginners if you want to improve."
-
Permute last layer (PLL) Start by rotating the top layer so that you've aligned as many pieces as possible. With practice, pattern recognition will make this much easier. Then, use one of the 21 PLL algorithms to complete your solve. [5] X Research source
- As a beginner to the method, two-look PLL allows you to complete this stage without memorizing as many algorithms, although it does tend to require a few extra moves.
Advertisement
Section 6 of 6:
Improving Your Speedsolving Time
Download Article
-
Keep your cube well-lubricated. A well-lubricated cube just moves smoother and faster than one that's not. Once you're confident in your movements, you'll find that you can turn a well-lubricated cube much more quickly and with a lot less effort. [13] X Research source
- A well-lubricated cube also decreases the resistance, which can lower your risk of hand and wrist repetitive-use injuries.
- You reduce the risk that the cube will lock up as well, which could totally ruin your time.
- Silicone grease and silicone sprays tend to work a bit better for lubricant than WD-40, which can make the cube (and your fingers) a bit sticky. [14] X Research source
-
Practice strong finger placement. The more types of moves you can make without moving your fingers, the faster you'll be able to make those moves. Choose the finger positions that give you the most mobility and allow you to manipulate the cube in as many ways as possible without changing those finger positions. [15] X Research source
- This is also part of building muscle memory because your fingers will automatically know exactly where to move and what to do when they are oriented in the same position on the cube every time you pick it up.
- During competition, use a couple of seconds of your inspection time to make sure that your fingers are in a good position and you're holding the cube in the way that's most comfortable for you.
-
Visualize the moves as you look at the scrambled cube. As you recognize patterns, apply the algorithm mentally by visualizing your fingers making the required moves or just the cube moving in the way that you want. Practice running through the whole algorithm mentally before you set your fingers to it. Doing this will make your movements more automatic. [16] X Research source
- The aim of this exercise is to decrease the delays between moves so that your fingers seem to be moving synchronously in many different directions at once.
- Because your fingers already know what to do next, they'll anticipate that action, which also helps you get faster.
-
Keep your hands in a neutral position and hold the cube stable. Hold the cube steady in one place rather than moving it around. As you make moves, focus on moving only your fingers and keeping your palms steady at all times. Steady palms will keep the cube stable and make it less likely to slip. [17] X Research source
- There are some moves that you can't complete without moving your hand. But when you make those moves, you can still keep your hands as still as possible. Think in terms of making a subtle tip of your hand rather than an exaggerated movement that will take more time to complete.
-
Move with delicate precision rather than brute force. If you started out playing with a cheaply made cube, you might be used to handling it with more force than might be strictly necessary—especially if you start practicing with a competition-grade cube. Using less force also conserves energy, which means that your fingers will be able to move a little faster. [18] X Research source
- When you focus on accuracy and making precise movements, you might also find that you can pull off little finger tricks that you learn with more consistency.
- On the other hand, turning aggressively can actually cause your cube to lock up—and that certainly won't do anything to improve your time.
-
Drill algorithms regularly. Huynh recommends that you "just sit and drill your algorithms, make sure your finger tricks are good and make sure you master them." Top solvers may know up to 3,000 algorithms, which obviously you can't sit and drill all at once. When you get to the point where you know quite a few, Huynh advises that "spaced repetition is a good tool to use if you're learning a lot of algorithms or just in general."
- The more often you drill algorithms, the more natural and automatic the finger movements will become. It'll also take less time for you to think about the algorithm before you execute it.
-
Experiment with different algorithms and finger tricks. Once you've memorized the algorithms, you can start playing around and figure out which ones work best for you, given all the different variables including hand and finger size and dexterity. Pinpoint the algorithms that are most comfortable for you, then work on pattern spotting to identify situations when you can use that algorithm—or make a few minor adjustments that will set you up for that algorithm. [19] X Research source
- Huynh emphasizes that getting faster is really about "improving your skills little by little and not worrying about who has what time." He encourages beginners to "think about it in the long run because when you learn a new method, you're going to be slower than you were."
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://ruwix.com/the-rubiks-cube/guide-wca-solves/
- ↑ https://ruwix.com/the-rubiks-cube/advanced-cfop-fridrich/white-cross/
- ↑ https://ruwix.com/the-rubiks-cube/advanced-cfop-fridrich/first-two-layers-f2l/
- ↑ https://ruwix.com/the-rubiks-cube/advanced-cfop-fridrich/orient-the-last-layer-oll/
- ↑ https://ruwix.com/the-rubiks-cube/advanced-cfop-fridrich/permutate-the-last-layer-pll/
- ↑ https://ruwix.com/the-rubiks-cube/different-rubiks-cube-solving-methods/
- ↑ https://jperm.net/3x3/moves
- ↑ https://jperm.net/algs/2lookoll
- ↑ https://jperm.net/algs/2lookpll
- ↑ https://ruwix.com/the-rubiks-cube/advanced-cfop-fridrich/orient-the-last-layer-oll/
- ↑ https://jperm.net/algs/pll
- ↑ https://www.speedcubing.com/chris/speedcubing.html
- ↑ https://www.speedcubing.com/chris/speedcubing.html
- ↑ https://maths-people.anu.edu.au/~burkej/cube/singmaster.pdf
- ↑ https://www.sfu.ca/~jtmulhol/math302/puzzles-rc-basic-solution-speed.html
- ↑ https://www.speedcubing.com/chris/speedcubing.html
- ↑ https://www.cubeskills.com/blog/improving-turning-speed
- ↑ https://www.cubeskills.com/blog/improving-turning-speed
- ↑ https://www.cubeskills.com/blog/improving-turning-speed
About This Article
Thanks to all authors for creating a page that has been read 852 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
