How to Change Fuses in a Car

PDF download Download Article
Diagnose and fix a broken fuse in your car’s electronics
PDF download Download Article

Learn how to quickly and safely change the fuses in your car and get back on the road without letting a dealership or mechanic get the best of you.

Method 1
Method 1 of 2:

Locating and Diagnosing

PDF download Download Article
  1. When one circuit has too much electricity flowing through it, the fuse blows to prevent serious damage and even fire. The best way of knowing if a fuse has blown, is if an electric component instantly stops working i.e. window stops while rolling up or down, radio stops workings, or all of the dash lights go out at once. If an electric component has been slowly getting worse, it is not likely a fuse but it is still good to check the fuses regularly. [1]
  2. [2] The owner's manual will tell where the vehicle's fuse panel is. Most models situate the fuse panel on the driver's side of the dashboard and under the steering wheel, but location varies from vehicle to vehicle. Remove the fuse panel's cover; there will be several different color-coded fuses plugged in. These colors, along with the numbers stamped on the fuses, indicate different amperage ratings. On the backside of the fuse panel there will be a diagram that shows which fuse corresponds with which electrical component. If the owner's manual is unavailable, try contacting a dealership for the location or a simple internet search can provide enough information to locate the fuse panel and specific fuses. [3]
    Advertisement
  3. Once the fuse panel is located, remove the cover and locate the fuse puller, most vehicles come with a small fuse puller but not all will have one. Before removing any fuses, it is possible to test a fuse before removing it, this requires either a continuity test light, or a multi-meter / ohm meter. [4]
  4. To test a fuse without removing it, using the two probes of either the test light or multi-meter, touch the two small metal tabs located on the top of the fuse. These tabs can be tricky to connect to, but once sure that the probes are making contact, if the fuse has continuity (test light lights up) or has a resistance reading (may read 0 or 0.001milli-ohm) then the fuse is good. If these tools are unavailable, simply use the fuse puller that was in the fuse panel, or a small pair of pliers, or just bare fingers to remove and visually inspect any fuses. If the fuse is bad, it needs to be replaced. [5]
    5. Advertisement
Method 2
Method 2 of 2:

Fuse Removal and Replacement

PDF download Download Article
  1. Use the fuse panel diagram, the numbered color-coded fuses and the owner's manual to help you determine the correct amperage for your new fuse. Once you have the right fuse gently push it into the correct slot, make sure it's completely installed, and then put the fuse panel back on the car. [6]
  2. Once you are done replacing the fuse, turn the ignition and check to see if the circuit giving you trouble is working correctly. If it is working, chances are you just had a temporary surge that blew the fuse. If that's the case, then you just solved the problem. [7]
    3. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What are the reasons why my car's service light engine is on?
    Jason Shackelford
    Auto Technician
    Jason Shackelford is the Owner of Stingray Auto Repair, a family owned and operated auto repair shop with locations in Seattle and Redmond, Washington. He has over 24 years of experience in auto repair and services, and every single technician on Jason’s team has more than 10 years of experience.
    Jason Shackelford
    Auto Technician
    Expert Answer
    The illumination of a service engine light typically occurs due to a variety of factors, with the most prevalent culprits being a loosely secured gas cap, insufficient fluid levels, malfunctioning sensors, or the presence of other non-critical issues within the vehicle's system. If you've checked everything and the light is still on, you can bring your car to the nearest car repair shop for a scan to properly diagnose the problem.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    Can I remove a fuse and start the car to determine what purpose the fuse serves?
    Akshit Sharma
    Community Answer
    It is most likely written on the fuse box, and is 100% written in the owner's manual, so you don't need to do that.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
  • Question
    Do I need to reconnect the battery before replacing fuses?
    Logic Johnson Lafontaine
    Top Answerer
    Yes, it's impossible to check if the fuse is working without having battery power.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Repeatedly replacing the same fuse means there is an underlying issue in that system of the vehicle, this will likely require further electrical diagnosing or a trip to a mechanic.
        Thanks
        Helpful 0 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you use the wrong amperage fuse, you could cause much worse damage to your vehicle than just a blown fuse.
        Thanks
        Helpful 11 Not Helpful 1
      • DO NOT attempt to diagnose or change fuses with the vehicle running or with the key in the ignition.
        Thanks
        Helpful 13 Not Helpful 3
      • Be careful when removing any trim pieces or access panels to get to the fuse panel as these can break.
        Thanks
        Helpful 4 Not Helpful 8
      Advertisement

      You Might Also Like

      How to
      Fix Dashboard Lights That Won't Light
      How to
      Connect Jumper Cables to a Dead Car
      How to
      Test a Fuse With a Multimeter
      How to
      Set and Use a Torque Wrench
      How to
      Loosen Lug Nuts
      How to
      Calibrate a Torque Wrench
      How to
      Use Jack Stands
      How to
      Add Oil to a Hydraulic Jack
      How to
      Clean Battery Terminals
      How to
      Change an Alternator
      How to
      Check Fuses
      How to
      Remove Lug Nuts and Tires
      How to
      Use a Winch
      How to
      Put Air in a Tire
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance and repair, check out our in-depth interview with Jason Shackelford .

      References

      1. ↑ https://carfromjapan.com/article/car-maintenance/replace-blown-fuse-in-car/
      2. ↑ https://knowhow.napaonline.com/learn-how-to-replace-a-car-fuse/
      3. ↑ https://www.2carpros.com/articles/how-to-check-a-car-fuse/
      4. ↑ https://www.samarins.com/diagnose/check-fuse.html
      5. ↑ https://www.youtube.com/watch?v=w44aQ7dc_Lk
      6. ↑ https://www.dummies.com/home-garden/car-repair/electrical-system/how-to-change-a-vehicles-fuses/
      7. ↑ https://www.dmv.org/how-to-guides/fuse.php

      About This Article

      Thanks to all authors for creating a page that has been read 88,702 times.

      Reader Success Stories

      • Anonymous

        Jan 12, 2017

        "Resolved my fuse issue! Thanks!"
      Share your story

      Did this article help you?

      Advertisement