How to Swap Out the Bits on Your Power Drill

PDF download Download Article
Swap out your bit easily and quickly with these simple instructions
PDF download Download Article

Whether you’re just getting started in the world of DIY hobbies or you’re a seasoned vet when it comes to the toolbox, everybody can benefit from knowing how to change a drill bit. There are two distinct styles of drill with different methods when it comes to swapping bits—typical modern drills, and the older models that come with a special key. As a result, it’s perfectly reasonable if you haven’t come across both of them before. In this article, we’ll show you how to easily and quickly swap out drill bits.

Things You Should Know

  • Use the button that changes the direction of the drill to lock it in the neutral setting before changing bits.
  • Twist the chuck at the front of the drill counterclockwise while holding the drill steady to loosen the bit and remove it.
  • For old drills with fancy chuck keys, insert the end of the key into the opening on the side of the drill and turn it counterclockwise to remove the bit.
Method 1
Method 1 of 2:

Standard Drills

PDF download Download Article
  1. 1
    Turn the drill off or lock the trigger. If you accidentally run the drill when you’re in the middle of changing the drill bit, you may cut your hand. Either flip the power button off, remove the battery pack, or press the small button above the trigger in halfway to lock the trigger. [1]
    • Locking the trigger almost always uses the same button you use to change the drill from clockwise to counterclockwise. The “middle” setting is the safety.
  2. Watermark wikiHow to Change a Drill Bit
    The chuck is the piece on the end of the drill that loosens and tightens to hold the bit (when you turn the drill on, the chuck is the part that spins). Grasp the chuck with one hand while you hold the handle of the drill with your other hand. Twist the chuck counterclockwise to loosen it. [2]
    • Loosening the chuck will open the jaws that clamp onto the drill bit.
    • Some old school handymen will hold the drill bit while running the drill counterclockwise. This is dangerous if you aren’t experienced with a drill though, so change the bit by hand to be safe.
    • If your drill chuck is locked in place, your drill may be damaged. Try replacing the chuck to see if that helps.
    Advertisement
  3. Remove the drill bit by sliding it out of the chuck. Once you loosen the chuck, the drill bit that you currently have in the drill will start to wobble or fall free. Pull it out of the drill by hand and set it aside. [3]
    • A lot of drills have small drill bit holders near the bottom of the handle to store whatever bit you just took out.
    • Inspect the bit when you remove it. If it looks damaged or worn, throw it out so you don't accidentally use it again later.
  4. Watermark wikiHow to Change a Drill Bit
    Hold the bit with your thumb and index finger so that the smooth part of the bit (the shank) is facing the jaws of the chuck. Insert the bit into the chuck so that the usable part of the bit sticks out past the edge of the drill. [4]
    • Keep your fingers on the bit and the chuck since the bit isn't secured and could fall out.
  5. 5
    Secure the new bit by twisting the chuck clockwise. Tighten the bit into place by rotating the chuck clockwise until you can’t turn it any further. Hold the bit in place with your other hand while you do this. [5]
    • A lot of experienced drill operators will pull the trigger to quickly tighten the bit. This is risky if you’ve never done it before so just tighten the bit by hand.
  6. Watermark wikiHow to Change a Drill Bit
    If your drill has a ratcheting mechanism to apply extra pressure to the shank of a drill bit, you'll need to click it into place. To engage it, firmly twist the ratcheting mechanism next to the chuck in a clockwise motion. [6]
    7. Advertisement
Method 2
Method 2 of 2:

Old School Power Drills with Chuck Key

PDF download Download Article
  1. 1
    Turn the drill off or set it to the neutral position. Set the button above the trigger to the middle “neutral” position, which will keep the drill from spinning if you accidentally pull the trigger. Alternatively, you can unplug the drill or remove the battery, if there is one. [7]
  2. Watermark wikiHow to Change a Drill Bit
    If your drill came with a chuck key, use it to loosen the chuck. To insert the chuck key, line up the teeth on the key so that they match the teeth on the chuck and insert the tip into the holes. [8]
    • Many drills that use a chuck key have a secure place on the drill where you store the key.
    • Typically, key chucks are found on specialized power drills rather than the common cordless models.
  3. As you turn the key, the jaws on the chuck will begin to open. Continue turning until the chuck opens enough to easily slide the drill bit out. [9]
    • The jaws are the 3-4 pieces in the mouth of the chuck that extend to hold the bit in place.
  4. Watermark wikiHow to Change a Drill Bit
    Pull the bit out using your thumb and index finger. Set the drill bit aside or slide it into the drill bit holder on the bottom of your drill. If the chuck is opened wide and you turn the drill face down, it may just fall out. [10]
    • Inspect the bit once you've removed it. Check for damage or worn areas. If the bit is dull, replace it. If it's bent or shows signs of cracking, throw it out so you won't mistakenly use it again.
  5. Watermark wikiHow to Change a Drill Bit
    While the jaws on the chuck are open wide, insert your new bit. Hold the bit with your thumb and index finger so that the smooth part of the bit (the shank) is facing the drill. Make sure the usable part of the bit is sticking out past the edge of the drill. [11]
    • Keep your fingers on the bit and the chuck since the bit isn't secured and could fall out.
  6. Watermark wikiHow to Change a Drill Bit
    While holding the bit in place with one hand, turn the chuck key clockwise to tighten the chuck's jaws with your other hand. Make sure to tighten it firmly so that the bit is secure. Remove the chuck key and voila! You’re ready to drill. [12]
    • Remove your hand from the bit and turn on the drill to test it before using it.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    My chuck key won't turn. How should I fix this?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Mark Spelman
    Construction Professional
    Expert Answer
    Applying a little WD-40 or another lubricating agent can help a still key move.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 20
  • Question
    How do you loosen a drill bit?
    Jason Phillip
    Handyman
    Jason Phillip is a handyman and owner of Iconic Interior Installations based in New York City, New York. With over five years of experience professionally mounting and installing objects through his company, Jason's work includes mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack.
    Jason Phillip
    Handyman
    Expert Answer
    On almost all drills these days, you just turn the front of the drill to loosen up the drill bit in order to replace it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you have a drill with a chuck key and you lose it, you don’t have to throw out the drill! Contact a key cutting or tool shop and ask them for a replacement chuck key. [13]
        Thanks
        Helpful 1 Not Helpful 0
      • If a drill bit gets stuck in something (or it won’t come out of the drill), use a vice grip or pliers to physically pull the bit out.
        Thanks
        Helpful 0 Not Helpful 1
      • This process applies to all popular drill brands, including Ryobi, Milwaukee, DeWalt, and Black and Decker.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Drill Out a Lock
      How to
      Drill a Hole in the Wall
      How to
      Needle Punch
      How to
      Drill Holes Through Glass
      10 Tips to Drill through Metal
      How to
      Remove a Chuck from a Drill
      How to
      Make a Pilot Hole
      How to
      Drill a Clay Pot
      How to
      Remove a Broken or Snapped Drill Bit
      How to
      Be Safe When Using Power Drills and Equipment
      How to
      Drill through Plexiglass Safely
      How to
      Dig Post Holes
      How to
      Drill at an Angle
      How to
      Drill Holes in Beads
      Advertisement

      References

      1. ↑ https://nps.edu/documents/111291366/113869380/Dewalt_Cordless_Drill.pdf/2f090e29-aabe-48cf-b3e1-0d251ce423fd?t=1554211130000
      2. ↑ https://nps.edu/documents/111291366/113869380/Dewalt_Cordless_Drill.pdf/2f090e29-aabe-48cf-b3e1-0d251ce423fd?t=1554211130000
      3. ↑ https://youtu.be/4FjCpf1uUB8?t=40
      4. ↑ https://nps.edu/documents/111291366/113869380/Dewalt_Cordless_Drill.pdf/2f090e29-aabe-48cf-b3e1-0d251ce423fd?t=1554211130000
      5. ↑ https://nps.edu/documents/111291366/113869380/Dewalt_Cordless_Drill.pdf/2f090e29-aabe-48cf-b3e1-0d251ce423fd?t=1554211130000
      6. ↑ https://nps.edu/documents/111291366/113869380/Dewalt_Cordless_Drill.pdf/2f090e29-aabe-48cf-b3e1-0d251ce423fd?t=1554211130000
      7. ↑ http://safety.ucanr.edu/files/1574.pdf
      8. ↑ https://www.alce.vt.edu/content/dam/alce_vt_edu/teacher-resources/lab-safety-resources/pelectricdrill.pdf
      9. ↑ https://www.alce.vt.edu/content/dam/alce_vt_edu/teacher-resources/lab-safety-resources/pelectricdrill.pdf
      1. ↑ https://www.alce.vt.edu/content/dam/alce_vt_edu/teacher-resources/lab-safety-resources/pelectricdrill.pdf
      2. ↑ https://www.alce.vt.edu/content/dam/alce_vt_edu/teacher-resources/lab-safety-resources/pelectricdrill.pdf
      3. ↑ http://safety.ucanr.edu/files/1574.pdf
      4. ↑ https://www.icscuttingtools.com/catalog/page_132.pdf

      About This Article

      Article Summary X

      To change a drill bit on a keyless drill, twist the chuck counterclockwise to loosen it, then pull it out. Hold the new bit with your thumb and index finger, then insert it into the chuck. Squeeze the trigger a few times to tighten the bit into place, then twist the ratcheting mechanism next to the chuck in a clockwise motion. If your chuck has a key, insert the key and turn it counterclockwise, then slide the bit out. Insert the new bit and turn the key clockwise to tighten the chuck. To learn more from our General Contractor co-author, like how to tell if a drill bit is worn or damaged, keep reading the article!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 744,876 times.

      Reader Success Stories

      • Anonymous

        Feb 7, 2017

        "Real demonstration by short video clips was the greatest thing, it led me to understand the stuff. Thank you so ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement