How to Change a Gas Bottle

PDF download Download Article
PDF download Download Article

If you’ve recently emptied a gas bottle or tank, you can easily disconnect it and attach a full one to the hose. Make sure you use the same type of gas as the old tank to ensure it works properly and avoid causing any damage. Propane gas bottles are typically used for powering machines or BBQ grills, while butane is typically used for burners or small torches. If you have a SodaStream machine for making carbonated drinks, be sure you use a SodaStream brand CO2 canister so it works properly. Whenever you change a gas bottle, ensure it has a firm connection without any leaks.

Method 1
Method 1 of 3:

Replacing a Propane Tank

PDF download Download Article
  1. Look for a circular or gear-shaped valve on top of the propane tank, which is usually labeled with arrows. Turn the valve clockwise as far as you’re able to so gas doesn’t start leaking out when you disconnect it. [1]
    • Turn the valve off even if you think the propane tank is empty since it may still contain small amounts of gas. Propane is extremely flammable, so even a small amount could ignite and cause damage.
    • Avoid forcing the valve any further than it’s able to go since you could damage the tank.
  2. Look for the large circular or rectangular regulator attached to the side of the tank’s valve and locate the nut holding it in place. Try turning the nut by hand first to see if it comes loose. If you’re unable to loosen it by hand, use a spanner wrench to turn the nut clockwise. Pull the regulator off of the tank and set it aside for now. [2]
    • You may smell a small amount of propane when you remove the regulator since there could have been gas trapped inside it.
    • Wear safety glasses while disconnecting the tank since the small amount of gas left inside may irritate your eyes.
    • Contact your city’s local government to find out how to properly dispose of your old tank.

    Tip: Check local hardware stores to see if they allow you to exchange empty propane tanks with ones that are full. As long as there isn’t any physical damage on the tank, you should be able to exchange it.

    Advertisement
  3. Make sure the new propane tank doesn’t have any exterior damage, such as dents or bulges, and ensure that the printed date on the bottle is less than 12 years old. If everything looks okay, unscrew the plastic cap on the side of the tank’s valve to expose the gasket, which is where you’ll reattach the regulator. [3]
    • Avoid using any tanks that are older than 12 years or have exterior damage since they’re more likely to break and could be dangerous.
    • Wear closed-toed shoes if you’re transporting or carrying the tank so you’re less likely to injure yourself.
  4. Hold the end of the regulator against the gasket so the nut lines up with the threading. Turn the nut counterclockwise by hand as tight as you can. Then, try turning the nut a half-turn further with a spanner wrench to ensure a tight seal on the tank. [4]
    • If you meet resistance while tightening the regulator nut, avoid forcing it any tighter since you could damage the gasket.
    • If the regulator doesn’t fit on the gasket well, try unscrewing it and checking it for damage. Replace the regulator if it has any damage since it could leak otherwise.
    • Avoid using a propane tank without a regulator since it will release gas quickly and make it difficult to control flames.
  5. Turn the valve counterclockwise so gas flows out of the tank and through the regulator. Fill a spray bottle with water and add 1–2 teaspoons (4.9–9.9 ml) of liquid dish soap. Shake the solution so it’s thoroughly mixed before spraying a stream directly on the connection between the gasket and the regulator. If you notice any bubbles forming, the connection may be leaking. [5]
    • If the connection has a gas leak, try unscrewing it and checking for damage before attempting to reattach it. If there’s damage on either the regulator or the tank, get a replacement.
    • You can also buy gas leak detection fluid from your local hardware store if you don’t want to use soapy water.
    • Keep your propane tank turned off whenever you aren’t using it to conserve gas and prevent any harmful leaks.
    6. Advertisement
Method 2
Method 2 of 3:

Connecting a Butane Tank

PDF download Download Article
  1. Look for the cylindrical or circular regulator connected to a metal stem sticking up from the top of the tank. If the switch on the regulator says “On” or shows an image of a red flame, then turn it to the Off position so any residual gas doesn’t leak out when you remove it. [6]
    • The regulator controls the gas flow coming out of the tank so it maintains a steady and constant stream.
    • Butane is extremely flammable, so make sure you're not working by an open flame or other ignition sources.
  2. Locate the black plastic ring on the bottom of the regulator and lift it up until you hear a clicking noise. Lift the regulator straight up from the tank so you don’t damage its stem. Set the regulator aside for now and remove the tank from where it’s mounted. [7]
    • Don’t remove the regulator at an angle since you could bend or damage the valve on the butane tank.
    • Wear safety glasses to prevent eye irritation since a small amount of gas could escape from the regulator.
    • Reach out to your city’s local government or waste management facility to find out how to properly throw away the old tank.

    Variation: If the regulator doesn’t have a ring on the bottom, there may be a locking button or dial on the side. Push the button or dial in to release the regulator from the valve. [8]

  3. Make sure the butane tank doesn’t have any dents, welds, or cracks in the body, or else it can be unsafe to use. If it doesn’t have any damage, locate the plastic seal covering the valve at the top of the tank. Push down on the seal and rotate it counterclockwise to unscrew it from the valve. [9]
    • Never use a propane tank that has exterior damage since it could be more likely to break.
    • If you need to transport or carry the new butane tank, put on closed-toed shoes to protect yourself from injuries.
  4. Grab the regulator with both hands so it’s perfectly vertical and the locking ring is on the bottom. Use your fingers to pull the locking ring up so it’s tight against the regulator’s body. Push the regulator down onto the valve until you hear it click into place. Let go of the locking ring to secure the regulator. [10]
    • If you used a button to remove the regulator, simply push the regulator onto the valve without holding the button down. The regulator will click once it’s secured to the valve.
  5. Use the switch or dial on the regulator and change it to the On position, which is usually labeled with the word “On” or a picture of a red flame. Use the burner or torch that you attached to the tank to ensure gas flows through it properly. [11]
    • If the gas doesn’t work properly, turn off the regulator before removing it from the tank. Inspect the valve and regulator for damage and replace them as needed.
    • Turn off the regulator whenever you’re finished using butane so it doesn’t leak afterward.
    6. Advertisement
Method 3
Method 3 of 3:

Changing a SodaStream Gas Bottle

PDF download Download Article
  1. Turn the SodaStream machine around to locate a black or grey button on the back side. Press down on the button until you hear it click, which means it’s released the back cover. Pull the back cover up and set it aside while you’re working. You will see the CO2 bottle in the middle of the machine. [12]

    Variation: If the back cover doesn’t come off, try holding the button down and lifting the top of the SodaStream machine. If that still doesn’t work, check the owner’s manual to see how to properly access the CO2 bottle.

  2. Grab the bottle and carefully turn it counterclockwise to loosen it. Keep spinning it until it comes loose from the port at the top of the machine. Pull the bottle out of the machine at a slight angle and throw it away with your regular trash. [13]
    • Check on the SodaStream website to see if there are any CO2 exchange programs in your area. Sometimes, you may be able to turn in your empty bottle in exchange for a full one at a discount.
  3. Make sure the CO2 bottle you buy is compatible with the SodaStream model you own, or else it may not fit in the machine properly. Tear the plastic cap off the end of the bottle and inspect it for any damage. If the seal cap was already broken, avoid using the bottle since it may be damaged or contaminated. [14]
    • You can buy SodaStream CO2 bottles from kitchen supply stores or online.
    • Avoid using off-brand CO2 bottles since they may not fit in the machine properly.
  4. Slide the CO2 bottle into the machine so the top of the bottle lines up with the port near the top of the machine. Push the bottle against the port and screw it in clockwise until it’s hand-tight. Avoid over-tightening the bottle since you could damage the machine. [15]
    • Don’t use tools to tighten the bottle, or else you could break the bottle or the machine.
  5. Position the back cover over the bottle so the latches on the side line up. Carefully push the cover straight down until you hear it click into place to ensure it’s secure. After that, you can use the SodaStream like normal to carbonate your drinks. [16]
    • Don’t force the back cover onto the machine since you could cause it to break.
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Always turn a gas bottle off when you aren’t using it since it could leak and spread harmful fumes. [17]
        Thanks
        Helpful 0 Not Helpful 0
      • Propane and butane are extremely flammable so store tanks away from heat sources and uncontrolled fires.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Replacing a Propane Tank

      • Propane tank
      • Spanner wrench
      • Spray bottle
      • Dish soap

      Connecting a Butane Tank

      • Butane tank

      Changing a SodaStream Gas Bottle

      • SodaStream CO2 bottle

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Paint on Plastic
      How to
      Clean a USB C Charging Port
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about gas bottles, check out our in-depth interview with Julian Beer Company .

      References

      1. ↑ http://www.propanesafetyfirst.com/pdf/forklift_cylinder_guide.pdf
      2. ↑ https://youtu.be/Zfmz93xyzDU?t=72
      3. ↑ https://youtu.be/Zfmz93xyzDU?t=10
      4. ↑ https://youtu.be/Zfmz93xyzDU?t=20
      5. ↑ https://www.propane101.com/checkingforgasleaks.htm
      6. ↑ https://youtu.be/LqTKKTzVebU?t=67
      7. ↑ https://youtu.be/LgDp9WQ3SEQ?t=116
      8. ↑ https://youtu.be/x-bVYDK54B8?t=29
      9. ↑ https://www.sikkerhverdag.no/en/gas-and-flammable-liquids/installation-and-maintenance/how-to-change-a-gas-bottle/
      1. ↑ https://www.sikkerhverdag.no/en/gas-and-flammable-liquids/installation-and-maintenance/how-to-change-a-gas-bottle/
      2. ↑ https://youtu.be/LqTKKTzVebU?t=63
      3. ↑ https://youtu.be/ytfP858uU9c?t=8
      4. ↑ https://youtu.be/C5rCmrzjrNw?t=42
      5. ↑ https://youtu.be/C5rCmrzjrNw?t=66
      6. ↑ https://youtu.be/ytfP858uU9c?t=17
      7. ↑ https://youtu.be/ytfP858uU9c?t=23
      8. ↑ https://www.sikkerhverdag.no/en/gas-and-flammable-liquids/installation-and-maintenance/how-to-change-a-gas-bottle/

      About This Article

      Thanks to all authors for creating a page that has been read 62,721 times.

      Did this article help you?

      Advertisement